3210341 Phoenix Contact Terminal Blocks

Product Details

• Color
  gray
• Overvoltage category
  III
• Nominal cross section
  1.5 mm²
• Rated surge voltage
  6 kV
• Insulating material group
  I
• Nominal current IN
  9 A
• Back of the hand protection
  guaranteed
• Result of power-frequency withstand voltage test
  Test passed
• Result of the test for mechanical stability of terminal points (5 x conductor connection)
  Test passed
• Result of voltage-drop test
  Test passed
• ETIM 6.0
  EC000902
• Permissible humidity (storage/transport)
  30 % ... 70 %
• ECLASS 5.0
  27141100
• ECLASS 9.0
  27141126
• ETIM 7.0
  EC000902
• Number of levels
  2
• Maximum load current
  9 A
• Finger protection
  guaranteed
• Power frequency withstand voltage setpoint
  1.89 kV
• Bending test rotation speed
  10 rpm
Tight fit on carrier
NS 35
Setpoint
1 N
Short-time current
0.18 kA
Conductor cross section short circuit testing
1.5 mm²
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Shock test result
Test passed
Shock form
Half-sine
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
End cover width
0.8 mm
Height NS 35/7,5
42.6 mm
Stripping length
8 mm ... 10 mm
Conductor cross section solid max.
1.5 mm²
Conductor cross section flexible max.
1.5 mm²
Min. AWG conductor cross section, flexible
26
Max. AWG conductor cross section, flexible
14
Internal cylindrical gage
A1 / B1
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 10.0.1
27141126
ECLASS 7.0
27141126
UNSPSC 13.2
39121410
UNSPSC 21.0
39121410
Potentials
2
Insulating material
PA
Maximum power dissipation for nominal condition
0.56 W (the value is multiplied when connecting multiple levels)
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Open side panel
Yes
Result of flexion and pull-out test
Test passed
Bending test turns
135
Bending test conductor cross section/weight
0.14 mm² / 0.2 kg
Result of tight fit on support
Test passed
Short circuit stability result
Test passed
Result of thermal test
Test passed
Ageing test for screwless modular terminal block temperature cycles
192
Test directions
X-, Y- and Z-axis (pos. and neg.)
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Length
86 mm
Connection method
Push-in connection
Conductor cross section solid min.
0.25 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.34 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
1 mm²
Ambient temperature (actuation)
-5 °C ... 70 °C
ETIM 4.0
EC000902
UNSPSC 18.0
39121410
UNSPSC 19.0
39121410
Number of connections
4
Flammability rating according to UL 94
V0
Degree of pollution
3
Nominal voltage UN
400 V
Result of surge voltage test
Test passed
Tensile test result
Test passed
Result of temperature-rise test
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Oscillation, broadband noise test result
Test passed
Test spectrum
Service life test category 2, bogie-mounted
Shock duration
18 ms
Static insulating material application in cold
-60 °C
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Width
3.5 mm
Height
41.1 mm
Connection in acc. with standard
IEC 60947-7-1
Conductor cross section flexible min.
0.14 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
1.5 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.34 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 125°C)
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 11.0
27141126
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Result of aging test
Test passed
ASD level
6.12 (m/s2)2/Hz
Acceleration
30g
Test duration per axis
5 h
Number of shocks per direction
3
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Height NS 35/15
50.1 mm
Connection
1st and 2nd level
Conductor cross section AWG min.
26
Conductor cross section AWG max.
14
Connection cross sections directly pluggable
0.25 mm² 1.5 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 5.1
27141100
ECLASS 6.0
27141100
UNSPSC 20.0
39121410