3210286 Phoenix Contact Terminal Blocks

Product Details

• Color
  gray
• Overvoltage category
  III
• Maximum load current
  16 A (with 4 mm² conductor cross section)
• Shock protection test specification
  DIN EN 50274 (VDE 0660-514):2002-11
• Finger protection
  guaranteed
• Result of temperature-rise test
  Test passed
• Conductor cross section short circuit testing
  2.5 mm²
• Ageing test for screwless modular terminal block temperature cycles
  192
• Test frequency
  f1 = 5 Hz to f2 = 250 Hz
• Acceleration
  30g
• Relative insulation material temperature index (Elec., UL 746 B)
  130 °C
• Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
  125 °C
• Fire protection for rail vehicles (DIN EN 45545-2) R26
  HL 1 - HL 3
• Connection
  1st and 2nd level
• Conductor cross section solid max.
  4 mm²
• Min. AWG conductor cross section, flexible
  26
• Conductor cross section flexible, with ferrule with plastic sleeve max.
  2.5 mm²
• Potentials
  2
• Flammability rating according to UL 94
  V0
• Maximum power dissipation for nominal condition
  0.77 W (the value is multiplied when connecting multiple levels)
Result of surge voltage test
Test passed
Power frequency withstand voltage setpoint
1.89 kV
Result of flexion and pull-out test
Test passed
Setpoint
1 N
Short-time current
0.3 kA
Result of aging test
Test passed
Test duration per axis
5 h
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Height
45.8 mm
Connection method
Push-in connection
Conductor cross section flexible min.
0.14 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.34 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
0.5 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 7.0
27141126
Nominal cross section
2.5 mm²
Degree of pollution
3
Insulating material group
I
Nominal voltage UN
400 V
Bending test rotation speed
10 rpm
Tight fit on carrier
NS 35
Short circuit stability result
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Test spectrum
Service life test category 2, bogie-mounted
Shock test result
Test passed
Shock duration
18 ms
Static insulating material application in cold
-60 °C
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Width
5.2 mm
Height NS 35/15
54.9 mm
Conductor cross section solid min.
0.34 mm²
Conductor cross section flexible max.
2.5 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.34 mm²
Internal cylindrical gage
A3
ECLASS 4.1
27141100
ECLASS 9.0
27141126
UNSPSC 18.0
39121410
Number of connections
4
Insulating material
PA
Nominal current IN
16 A
Back of the hand protection
guaranteed
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Tensile test result
Test passed
Result of tight fit on support
Test passed
Result of thermal test
Test passed
Oscillation, broadband noise test result
Test passed
ASD level
6.12 (m/s2)2/Hz
Shock form
Half-sine
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Length
92.4 mm
Connection in acc. with standard
IEC 60947-7-1
Conductor cross section AWG max.
12
Max. AWG conductor cross section, flexible
14
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 4.0
27141100
ECLASS 6.0
27141100
ETIM 7.0
EC000902
UNSPSC 11
39121410
UNSPSC 21.0
39121410
Number of levels
2
Rated surge voltage
6 kV
Open side panel
Yes
Result of power-frequency withstand voltage test
Test passed
Bending test turns
135
Bending test conductor cross section/weight
0.14 mm² / 0.2 kg
Result of voltage-drop test
Test passed
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Test directions
X-, Y- and Z-axis (pos. and neg.)
Number of shocks per direction
3
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
End cover width
0.8 mm
Height NS 35/7,5
47.4 mm
Stripping length
8 mm ... 10 mm
Conductor cross section AWG min.
26
Conductor cross section flexible, with ferrule without plastic sleeve max.
2.5 mm²
Connection cross sections directly pluggable
0.34 mm² 4 mm²
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 11.0
27141126
ECLASS 5.1
27141100
ETIM 6.0
EC000902
UNSPSC 6.01
30211811
UNSPSC 20.0
39121410
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 10.0.1
27141126
ECLASS 5.0
27141100
ETIM 4.0
EC000897
UNSPSC 12.01
39121410
UNSPSC 7.0901
39121410
UNSPSC 13.2
39121410
UNSPSC 19.0
39121410