3210267 Phoenix Contact Terminal Blocks

Product Details

• Color
  gray
• Insulating material group
  I
• Nominal current IN
  16 A
• Result of surge voltage test
  Test passed
• Result of flexion and pull-out test
  Test passed
• Result of tight fit on support
  Test passed
• Tight fit on carrier
  NS 35
• Requirement temperature-rise test
  Increase in temperature ≤ 45 K
• Short-time current
  0.3 kA
• Test specification, oscillation, broadband noise
  DIN EN 50155 (VDE 0115-200):2008-03
• Test frequency
  f1 = 5 Hz to f2 = 250 Hz
• Shock duration
  18 ms
• Number of shocks per direction
  3
• Fire protection for rail vehicles (DIN EN 45545-2) R23
  HL 1 - HL 3
• Width
  5.2 mm
• Height
  45.8 mm
• Connection method
  Push-in connection
• Conductor cross section AWG min.
  26
• Max. AWG conductor cross section, flexible
  14
• Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
  0.5 mm²
ECLASS 10.0.1
27141120
ECLASS 7.0
27141120
UNSPSC 13.2
39121410
Nominal cross section
2.5 mm²
Degree of pollution
3
Overvoltage category
III
Open side panel
Yes
Finger protection
guaranteed
Bending test rotation speed
10 rpm
Setpoint
1 N
Result of thermal test
Test passed
Test spectrum
Service life test category 2, bogie-mounted
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Conductor cross section solid min.
0.34 mm²
Conductor cross section solid max.
4 mm²
Conductor cross section flexible max.
2.5 mm²
Connection cross sections directly pluggable
0.34 mm² 4 mm²
ECLASS 11.0
27141120
ECLASS 6.0
27141100
UNSPSC 18.0
39121410
Potentials
2
Flammability rating according to UL 94
V0
Maximum power dissipation for nominal condition
0.77 W (the value is multiplied when connecting multiple levels)
Back of the hand protection
guaranteed
Result of power-frequency withstand voltage test
Test passed
Tensile test result
Test passed
Result of temperature-rise test
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Oscillation, broadband noise test result
Test passed
ASD level
6.12 (m/s2)2/Hz
Shock test result
Test passed
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
End cover width
0.8 mm
Stripping length
8 mm ... 10 mm
Conductor cross section flexible min.
0.14 mm²
Min. AWG conductor cross section, flexible
26
Internal cylindrical gage
A3
ECLASS 5.0
27141100
ETIM 6.0
EC000897
UNSPSC 20.0
39121410
Number of connections
4
Rated surge voltage
6 kV
Nominal voltage UN
400 V
Power frequency withstand voltage setpoint
1.89 kV
Bending test turns
135
Result of voltage-drop test
Test passed
Ageing test for screwless modular terminal block temperature cycles
192
Acceleration
30g
Shock form
Half-sine
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Height NS 35/15
54.9 mm
Height NS 35/7,5
47.4 mm
Connection in acc. with standard
IEC 60947-7-1
Conductor cross section flexible, with ferrule without plastic sleeve max.
2.5 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
2.5 mm²
ECLASS 9.0
27141120
ETIM 7.0
EC000897
UNSPSC 21.0
39121410
Number of levels
2
Insulating material
PA
Maximum load current
16 A (with 4 mm² conductor cross section)
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Bending test conductor cross section/weight
0.14 mm² / 0.2 kg
Short circuit stability result
Test passed
Conductor cross section short circuit testing
2.5 mm²
Result of aging test
Test passed
Test duration per axis
5 h
Test directions
X-, Y- and Z-axis (pos. and neg.)
Static insulating material application in cold
-60 °C
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
Length
92.4 mm
Connection
1st and 2nd level
Conductor cross section AWG max.
12
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.34 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.34 mm²
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 5.1
27141100
ETIM 4.0
EC000902
UNSPSC 19.0
39121410