3210258 Phoenix Contact Terminal Blocks

Product Details

• Number of connections
  4
• Nominal cross section
  2.5 mm²
• Insulating material
  PA
• Rated surge voltage
  6 kV
• Degree of pollution
  3
• Nominal current IN
  16 A
• Result of power-frequency withstand voltage test
  Test passed
• Result of the test for mechanical stability of terminal points (5 x conductor connection)
  Test passed
• Bending test turns
  135
• Result of voltage-drop test
  Test passed
• Result of temperature-rise test
  Test passed
• Result of thermal test
  Test passed
• Test specification, oscillation, broadband noise
  DIN EN 50155 (VDE 0115-200):2008-03
• Test duration per axis
  5 h
• Test directions
  X-, Y- and Z-axis (pos. and neg.)
• Shock duration
  18 ms
• Relative insulation material temperature index (Elec., UL 746 B)
  130 °C
• Fire protection for rail vehicles (DIN EN 45545-2) R22
  HL 1 - HL 3
• Width
  5.2 mm
• Height NS 35/15
  54.9 mm
Conductor cross section solid max.
4 mm²
Open side panel
Yes
Nominal voltage UN
400 V
Power frequency withstand voltage setpoint
1.89 kV
Bending test rotation speed
10 rpm
Setpoint
1 N
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Ageing test for screwless modular terminal block temperature cycles
192
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Shock test result
Test passed
Number of shocks per direction
3
Surface flammability NFPA 130 (ASTM E 162)
passed
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
End cover width
0.8 mm
Connection
1st and 2nd level
Connection method
Push-in connection
Conductor cross section flexible max.
2.5 mm²
Max. AWG conductor cross section, flexible
14
Internal cylindrical gage
A3
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 9.0
27141126
UNSPSC 12.01
39121410
UNSPSC 20.0
39121410
Number of levels
2
Potentials
2
Color
gray
Flammability rating according to UL 94
V0
Connection in acc. with standard
IEC 60947-7-1
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.34 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
0.5 mm²
ECLASS 11.0
27141126
ETIM 6.0
EC000902
UNSPSC 11
39121410
UNSPSC 21.0
39121410
Overvoltage category
III
Insulating material group
I
Maximum load current
16 A (with 4 mm² conductor cross section)
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Result of flexion and pull-out test
Test passed
Bending test conductor cross section/weight
0.14 mm² / 0.2 kg
Result of tight fit on support
Test passed
Conductor cross section short circuit testing
2.5 mm²
Short circuit stability result
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Test spectrum
Service life test category 2, bogie-mounted
Acceleration
30g
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Static insulating material application in cold
-60 °C
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Height NS 35/7,5
47.4 mm
Stripping length
8 mm ... 10 mm
Conductor cross section solid min.
0.34 mm²
Conductor cross section AWG max.
12
Conductor cross section flexible, with ferrule with plastic sleeve max.
2.5 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 5.0
27141100
ETIM 7.0
EC000902
UNSPSC 19.0
39121410
ETIM 4.0
EC000902
Maximum power dissipation for nominal condition
0.77 W (the value is multiplied when connecting multiple levels)
Back of the hand protection
guaranteed
Result of surge voltage test
Test passed
Finger protection
guaranteed
Tensile test result
Test passed
Tight fit on carrier
NS 35
Short-time current
0.3 kA
Result of aging test
Test passed
Oscillation, broadband noise test result
Test passed
ASD level
6.12 (m/s2)2/Hz
Shock form
Half-sine
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Length
92.4 mm
Height
45.8 mm
Conductor cross section AWG min.
26
Conductor cross section flexible min.
0.14 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
2.5 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 125°C)
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 4.0
27141100
ECLASS 5.1
27141100
UNSPSC 6.01
30211811
UNSPSC 18.0
39121410
ECLASS 10.0.1
27141126
Min. AWG conductor cross section, flexible
26
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.34 mm²
Connection cross sections directly pluggable
0.34 mm² 4 mm²
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 4.1
27141100
ECLASS 6.0
27141100
UNSPSC 7.0901
39121410
UNSPSC 13.2
39121410
ECLASS 7.0
27141126