3210224 Phoenix Contact Terminal Blocks

Product Details

• Conductor cross section flexible max.
  4 mm²
• Color
  gray
• Overvoltage category
  III
• Maximum load current
  0.5 A (with 4 mm² conductor cross section, rigid)
• Back of the hand protection
  guaranteed
• Note
  Measured with diode.
• Insulating material
  PA
• Degree of pollution
  3
• Rated surge voltage
  8 kV
• Nominal current IN
  0.5 A
• Result of surge voltage test
  Test passed
• Result of the test for mechanical stability of terminal points (5 x conductor connection)
  Test passed
• Result of tight fit on support
  Test passed
• Result of temperature-rise test
  Test passed
• Short-time current
  0.48 kA
• Proof of thermal characteristics (needle flame) effective duration
  30 s
• Test duration per axis
  5 h
• Shock form
  Half-sine
• Static insulating material application in cold
  -60 °C
• Fire protection for rail vehicles (DIN EN 45545-2) R23
  HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Length
48.5 mm
Conductor cross section solid min.
0.34 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
2.5 mm²
Internal cylindrical gage
A3
Permissible humidity (storage/transport)
30 % ... 70 %
Connection in acc. with standard
CSA
ECLASS 7.0
27141127
ETIM 7.0
EC000903
UNSPSC 11
39121410
UNSPSC 20.0
39121410
Number of connections
2
Flammability rating according to UL 94
V0
Insulating material group
I
Nominal voltage UN
800 V
Open side panel
Yes
Result of flexion and pull-out test
Test passed
Bending test conductor cross section/weight
0.14 mm² / 0.2 kg
Setpoint
1 N
Conductor cross section short circuit testing
4 mm²
Ageing test for screwless modular terminal block temperature cycles
192
Oscillation, broadband noise test result
Test passed
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Shock test result
Test passed
Shock duration
18 ms
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Surface flammability NFPA 130 (ASTM E 162)
passed
Width
5.2 mm
Height NS 35/7,5
36.5 mm
Stripping length
8 mm ... 10 mm
Conductor cross section AWG max.
12
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.34 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 11.0
27141127
ECLASS 6.0
27141100
ETIM 4.0
EC000897
UNSPSC 6.01
30211811
UNSPSC 18.0
39121410
Number of levels
1
Potentials
1
Nominal cross section
2.5 mm²
Maximum power dissipation for nominal condition
0.77 W
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Finger protection
guaranteed
Result of power-frequency withstand voltage test
Test passed
Bending test rotation speed
10 rpm
Tight fit on carrier
NS 35
Result of voltage-drop test
Test passed
Result of thermal test
Test passed
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Test directions
X-, Y- and Z-axis (pos. and neg.)
Number of shocks per direction
3
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
End cover width
2.2 mm
Connection
1 level
Conductor cross section flexible min.
0.14 mm²
Min. AWG conductor cross section, flexible
26
Connection cross sections directly pluggable
0.34 mm² 4 mm²
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 10.0.1
27141127
ECLASS 5.1
27141100
ETIM 2.0
EC000897
UNSPSC 7.0901
39121410
UNSPSC 21.0
39121410
Conductor cross section AWG min.
26
Max. AWG conductor cross section, flexible
14
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
0.5 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
REACh SVHC
Lead 7439-92-1
ECLASS 4.0
27141100
ECLASS 9.0
27141127
ETIM 6.0
EC000903
UNSPSC 12.01
39121410
UNSPSC 19.0
39121410
Power frequency withstand voltage setpoint
2 kV
Bending test turns
135
Tensile test result
Test passed
Short circuit stability result
Test passed
Result of aging test
Test passed
Test spectrum
Service life test category 2, bogie-mounted
ASD level
6.12 (m/s2)2/Hz
Acceleration
30g
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Height NS 35/15
44 mm
Connection method
Push-in connection
Conductor cross section solid max.
4 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
2.5 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.34 mm²
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 4.1
27141100
ECLASS 5.0
27141100
ETIM 3.0
EC000897
UNSPSC 13.2
39121410