3210184 Phoenix Contact Terminal Blocks

Product Details

• Number of levels
  1
• Flammability rating according to UL 94
  V0
• Nominal current IN
  16 A
• Open side panel
  Yes
• Bending test rotation speed
  10 rpm
• Tight fit on carrier
  NS 35
• Setpoint
  1 N
• Proof of thermal characteristics (needle flame) effective duration
  30 s
• Oscillation, broadband noise test result
  Test passed
• Shock test result
  Test passed
• Shock form
  Half-sine
• Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
  125 °C
• Fire protection for rail vehicles (DIN EN 45545-2) R23
  HL 1 - HL 3
• Length
  92.2 mm
• Connection method
  Push-in connection
• Conductor cross section AWG min.
  26
• Conductor cross section flexible max.
  4 mm²
• Conductor cross section flexible, with ferrule without plastic sleeve max.
  2.5 mm²
• Permissible humidity (storage/transport)
  30 % ... 70 %
• China RoHS
  Environmentally friendly use period: unlimited = EFUP-e
ECLASS 6.0
27141100
ETIM 3.0
EC000902
UNSPSC 7.0901
39121410
UNSPSC 21.0
39121410
Nominal cross section
2.5 mm²
Insulating material
PA
Maximum power dissipation for nominal condition
0.77 W
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Power frequency withstand voltage setpoint
1.89 kV
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Result of tight fit on support
Test passed
Note
The max. load current must not be exceeded by the total current of all connected conductors.
Short-time current
0.18 kA
Test spectrum
Service life test category 2, bogie-mounted
Test directions
X-, Y- and Z-axis (pos. and neg.)
Static insulating material application in cold
-60 °C
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Height
35.2 mm
Height NS 35/15
44.2 mm
Conductor cross section solid min.
0.34 mm²
Conductor cross section flexible min.
0.14 mm²
Max. AWG conductor cross section, flexible
14
Conductor cross section flexible, with ferrule with plastic sleeve max.
2.5 mm²
ECLASS 10.0.1
27141126
ECLASS 5.1
27141100
ECLASS 7.0
27141126
UNSPSC 6.01
30211811
UNSPSC 13.2
39121410
Test duration per axis
5 h
Potentials
1
Degree of pollution
3
Overvoltage category
III
Nominal voltage UN
400 V
Result of surge voltage test
Test passed
Bending test conductor cross section/weight
0.14 mm² / 0.2 kg
Result of temperature-rise test
Test passed
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Ageing test for screwless modular terminal block temperature cycles
192
ASD level
6.12 (m/s2)2/Hz
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2018-05
Surface flammability NFPA 130 (ASTM E 162)
passed
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Connection
1 level
Connection in acc. with standard
CUL
Min. AWG conductor cross section, flexible
26
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
0.5 mm²
Internal cylindrical gage
A3
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 11.0
27141126
ECLASS 9.0
27141126
ETIM 7.0
EC000902
UNSPSC 19.0
39121410
Number of connections
4
Area of application
Railway industry
Insulating material group
I
Back of the hand protection
guaranteed
Result of power-frequency withstand voltage test
Test passed
Bending test turns
135
Result of voltage-drop test
Test passed
Conductor cross section short circuit testing
1.5 mm²
Result of thermal test
Test passed
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Acceleration
30g
Shock duration
18 ms
Number of shocks per direction
3
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
End cover width
2.2 mm
Conductor cross section solid max.
4 mm²
Conductor cross section AWG max.
12
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.34 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 4.1
27141100
ETIM 6.0
EC000902
UNSPSC 11
39121410
UNSPSC 12.01
39121410
Color
gray
Rated surge voltage
6 kV
Maximum load current
16 A (with 4 mm² conductor cross section, rigid)
Finger protection
guaranteed
Result of flexion and pull-out test
Test passed
Tensile test result
Test passed
Short circuit stability result
Test passed
Result of aging test
Test passed
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2018-05
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Width
5.2 mm
Height NS 35/7,5
36.7 mm
Stripping length
8 mm ... 10 mm
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.5 mm²
Connection cross sections directly pluggable
0.34 mm² 4 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 125°C)
ECLASS 4.0
27141100
ECLASS 5.0
27141100
ETIM 4.0
EC000902
UNSPSC 18.0
39121410
UNSPSC 20.0
39121410