3210170 Phoenix Contact Terminal Blocks

Product Details

• Number of connections
  3
• Insulating material
  PA
• Flammability rating according to UL 94
  V0
• Maximum load current
  16 A (with 4 mm² conductor cross section, rigid)
• Maximum power dissipation for nominal condition
  0.77 W
• Back of the hand protection
  guaranteed
• Result of the test for mechanical stability of terminal points (5 x conductor connection)
  Test passed
• Bending test conductor cross section/weight
  0.14 mm² / 0.2 kg
• Setpoint
  1 N
• Requirement temperature-rise test
  Increase in temperature ≤ 45 K
• Color
  gray
• Insulating material group
  I
• Shock protection test specification
  DIN EN 50274 (VDE 0660-514):2002-11
• Result of power-frequency withstand voltage test
  Test passed
• Result of flexion and pull-out test
  Test passed
• Result of tight fit on support
  Test passed
• Requirements, voltage drop
  U1 ≤ 6,4 mV (1,6 mV x number of conductorclamping units or disconnect unit contactpoints)U2 ≤ 1,5 x U1
• Nominal cross section
  2.5 mm²
• Rated surge voltage
  6 kV
• Number of levels
  1
Area of application
Railway industry
Degree of pollution
3
Nominal voltage UN
400 V
Finger protection
guaranteed
Power frequency withstand voltage setpoint
1.89 kV
Tensile test result
Test passed
Tight fit on carrier
NS 35
Short circuit stability result
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Test spectrum
Service life test category 2, bogie-mounted
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2018-05
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2018-05
Shock form
Half-sine
Static insulating material application in cold
-60 °C
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Height NS 35/15
44.2 mm
Stripping length
8 mm ... 10 mm
Conductor cross section AWG min.
26
Conductor cross section flexible max.
4 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
2.5 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
2.5 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 11.0
27141126
ECLASS 5.1
27141100
ECLASS 5.0
27141100
ETIM 6.0
EC000902
UNSPSC 6.01
30211811
UNSPSC 18.0
39121410
UNSPSC 21.0
39121410
Potentials
1
Overvoltage category
III
Nominal current IN
16 A
Result of surge voltage test
Test passed
Bending test rotation speed
10 rpm
Bending test turns
135
Result of voltage-drop test
Test passed
Result of temperature-rise test
Test passed
Conductor cross section short circuit testing
2.5 mm²
Ageing test for screwless modular terminal block temperature cycles
192
ASD level
6.12 (m/s2)2/Hz
Test duration per axis
5 h
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Surface flammability NFPA 130 (ASTM E 162)
passed
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
End cover width
2.2 mm
Height
35.2 mm
Connection
1 level
Conductor cross section solid max.
4 mm²
Max. AWG conductor cross section, flexible
14
Min. AWG conductor cross section, flexible
26
Internal cylindrical gage
A3
Permissible humidity (storage/transport)
30 % ... 70 %
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 4.0
27141100
ECLASS 6.0
27141100
ETIM 4.0
EC000902
UNSPSC 7.0901
39121410
UNSPSC 12.01
39121410
UNSPSC 13.2
39121410
UNSPSC 19.0
39121410
Open side panel
Yes
Note
The max. load current must not be exceeded by the total current of all connected conductors.
Result of thermal test
Test passed
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Test directions
X-, Y- and Z-axis (pos. and neg.)
Shock duration
18 ms
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Length
81.9 mm
Connection in acc. with standard
CSA
Conductor cross section solid min.
0.34 mm²
Conductor cross section AWG max.
12
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.34 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 125°C)
Ambient temperature (actuation)
-5 °C ... 70 °C
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 7.0
27141126
Short-time current
0.3 kA
Result of aging test
Test passed
Oscillation, broadband noise test result
Test passed
Acceleration
30g
Shock test result
Test passed
Number of shocks per direction
3
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Width
5.2 mm
Height NS 35/7,5
36.7 mm
Connection method
Push-in connection
Conductor cross section flexible min.
0.14 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.5 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
0.5 mm²
Connection cross sections directly pluggable
0.34 mm² 4 mm²
ECLASS 10.0.1
27141126
ECLASS 4.1
27141100
ECLASS 9.0
27141126
ETIM 3.0
EC000902
ETIM 7.0
EC000902
UNSPSC 11
39121410
UNSPSC 20.0
39121410