3210157 Phoenix Contact Terminal Blocks

Product Details

• Nominal cross section
  2.5 mm²
• Insulating material
  PA
• Maximum load current
  16 A (with 4 mm² conductor cross section, rigid)
• Nominal current IN
  16 A
• Result of surge voltage test
  Test passed
• Result of flexion and pull-out test
  Test passed
• Bending test conductor cross section/weight
  0.14 mm² / 0.2 kg
• Result of tight fit on support
  Test passed
• Result of temperature-rise test
  Test passed
• Short-time current
  0.3 kA
• Proof of thermal characteristics (needle flame) effective duration
  30 s
• Test specification, oscillation, broadband noise
  DIN EN 50155 (VDE 0115-200):2018-05
• Shock form
  Half-sine
• Calorimetric heat release NFPA 130 (ASTM E 1354)
  28 MJ/kg
• Fire protection for rail vehicles (DIN EN 45545-2) R24
  HL 1 - HL 3
• End cover width
  2.2 mm
• Connection
  1 level
• Connection method
  Push-in connection
• Conductor cross section solid max.
  4 mm²
• Conductor cross section AWG max.
  12
Conductor cross section flexible, with ferrule without plastic sleeve max.
2.5 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.34 mm²
Internal cylindrical gage
A3
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 10.0.1
27141126
ECLASS 4.0
27141100
ETIM 4.0
EC000902
ETIM 6.0
EC000902
UNSPSC 12.01
39121410
UNSPSC 21.0
39121410
Potentials
1
Flammability rating according to UL 94
V0
Degree of pollution
3
Open side panel
Yes
Back of the hand protection
guaranteed
Bending test rotation speed
10 rpm
Conductor cross section tensile test
4 mm²
Result of voltage-drop test
Test passed
Result of thermal test
Test passed
Oscillation, broadband noise test result
Test passed
Acceleration
30g
Shock duration
18 ms
Surface flammability NFPA 130 (ASTM E 162)
passed
Color
gray
Overvoltage category
III
Finger protection
guaranteed
Bending test turns
135
Tight fit on carrier
NS 35
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Short circuit stability result
Test passed
Result of aging test
Test passed
Test duration per axis
5 h
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Width
5.2 mm
Height NS 35/7,5
36.7 mm
Conductor cross section AWG min.
26
Min. AWG conductor cross section, flexible
26
Conductor cross section flexible, with ferrule with plastic sleeve max.
2.5 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 4.1
27141100
ECLASS 9.0
27141126
ETIM 7.0
EC000902
UNSPSC 7.0901
39121410
UNSPSC 11
39121410
Number of levels
1
Rated surge voltage
6 kV
Maximum power dissipation for nominal condition
0.77 W
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Power frequency withstand voltage setpoint
1.89 kV
Tractive force setpoint
60 N
Conductor cross section short circuit testing
2.5 mm²
Ageing test for screwless modular terminal block temperature cycles
192
ASD level
6.12 (m/s2)2/Hz
Test directions
X-, Y- and Z-axis (pos. and neg.)
Shock test result
Test passed
Static insulating material application in cold
-60 °C
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Height NS 35/15
44.2 mm
Conductor cross section solid min.
0.34 mm²
Conductor cross section flexible min.
0.14 mm²
Max. AWG conductor cross section, flexible
14
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 125°C)
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 5.0
27141100
ECLASS 7.0
27141126
ETIM 3.0
EC000902
UNSPSC 6.01
30211811
UNSPSC 18.0
39121410
UNSPSC 19.0
39121410
Number of connections
2
Area of application
Railway industry
Insulating material group
I
Nominal voltage UN
400 V
Result of power-frequency withstand voltage test
Test passed
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Tensile test result
Test passed
Setpoint
1 N
Test spectrum
Service life test category 2, bogie-mounted
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2018-05
Number of shocks per direction
3
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Length
70.1 mm
Height
35.2 mm
Stripping length
8 mm ... 10 mm
Connection in acc. with standard
CSA
Conductor cross section flexible max.
4 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.5 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
0.5 mm²
Connection cross sections directly pluggable
0.34 mm² 4 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 11.0
27141126
ECLASS 5.1
27141100
ECLASS 6.0
27141100
UNSPSC 13.2
39121410
UNSPSC 20.0
39121410