3050303 Phoenix Contact Terminal Blocks

Product Details

• Conductor cross section flexible min.
  0.14 mm²
• Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
  0.14 mm²
• 2 conductors with same cross section, stranded max.
  1.5 mm²
• Permissible humidity (storage/transport)
  30 % ... 70 %
• ECLASS 4.0
  27141100
• ECLASS 7.0
  27141120
• ETIM 2.0
  EC000897
• UNSPSC 12.01
  39121410
• UNSPSC 20.0
  39121410
• Test certificate name
  KEMA 05ATEX2148 U
• 2 conductors with same cross section, solid min.
  0.14 mm²
• Conductor cross section flexible, with ferrule without plastic sleeve min.
  0.14 mm²
• Conductor cross section flexible, with ferrule with plastic sleeve max.
  4 mm²
• Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
  1.5 mm²
• 2 conductors with same cross section, solid max.
  1.5 mm²
• Operating temperature
  -60 °C ... 105 °C (max. short-term operating temperature 130°C)
• Ambient temperature (actuation)
  -5 °C ... 70 °C
• ECLASS 10.0.1
  27141120
• ECLASS 5.0
  27141100
• ECLASS 6.0
  27141100
ETIM 4.0
EC000897
UNSPSC 11
39121410
UNSPSC 18.0
39121410
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 5.1
27141100
ETIM 6.0
EC000897
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 4.1
27141100
ETIM 3.0
EC000897
UNSPSC 6.01
30211811
ETIM 7.0
EC000897
ECLASS 11.0
27141120
ECLASS 9.0
27141120
UNSPSC 7.0901
39121410
Insulating material
PA
Flammability rating according to UL 94
V0
Insulating material group
I
Shock protection test specification
IEC 60529:2001-02
Finger protection
guaranteed
Result of flexion and pull-out test
Test passed
Bending test conductor cross section/weight
0.2 mm² / 0.2 kg
Result of tight fit on support
Test passed
Short circuit stability result
Test passed
Short-time current
0.3 kA
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Max. wire diameter incl. insulation
3.8 mm
Conductor cross section solid max.
6 mm²
Conductor cross section AWG max.
10
Number of connections
3
Nominal cross section
2.5 mm²
Maximum load current
24 A (with 2.5 mm² conductor connection cross section)
Connection method
Screw connection
Nominal current IN
24 A
Back of the hand protection
guaranteed
Power frequency withstand voltage setpoint
2 kV
Bending test turns
135
Bending test rotation speed
10 rpm
Setpoint
1 N
Result of voltage-drop test
Test passed
Requirements, voltage drop
≤ 3.2 mV
Result of thermal test
Test passed
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Surface flammability NFPA 130 (ASTM E 162)
passed
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Height NS 35/15
50.3 mm
Stripping length
9 mm
Conductor cross section solid min.
0.14 mm²
Number of levels
1
Degree of pollution
3
Overvoltage category
III
Open side panel
Yes
Connection in acc. with standard
CUL
Surge voltage test setpoint
9.8 kV
Result of power-frequency withstand voltage test
Test passed
Conductor cross section tensile test
6 mm²
Tight fit on carrier
NS 35
Conductor cross section short circuit testing
2.5 mm²
Ageing test for screwless modular terminal block temperature cycles
192
Static insulating material application in cold
-60 °C
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Width
6.2 mm
Length
82.5 mm
Tightening torque, min
0.6 Nm
End cover width
2.2 mm
Min. AWG conductor cross section, flexible
20
Screw thread
M3
Material wire insulation
PVC / PE
Conductor cross section flexible, with ferrule without plastic sleeve max.
4 mm²
Color
gray
Rated surge voltage
8 kV
Maximum power dissipation for nominal condition
0.77 W
Nominal voltage UN
800 V
Result of surge voltage test
Test passed
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Result of temperature-rise test
Test passed
Result of aging test
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Height NS 35/7,5
42.8 mm
Tightening torque max
0.8 Nm
Conductor cross section AWG min.
26
Tensile test result
Test passed
Tractive force setpoint
80 N
Conductor cross section flexible max.
4 mm²
Max. AWG conductor cross section, flexible
14
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.14 mm²
2 conductors with same cross section, stranded min.
0.14 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
2.5 mm²
UNSPSC 21.0
39121410
UNSPSC 13.2
39121410
UNSPSC 19.0
39121410