3050044 Phoenix Contact Terminal Blocks

Product Details

• Maximum load current
  17.5 A (with 1.5 mm² conductor cross section)
• Shock protection test specification
  DIN EN 50274 (VDE 0660-514):2002-11
• Tight fit on carrier
  NS 35
• Test duration per axis
  5 h
• Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
  130 °C
• Ageing test for screwless modular terminal block temperature cycles
  192
• Width
  5.2 mm
• Material wire insulation
  PVC / PE
• Conductor cross section flexible, with ferrule without plastic sleeve min.
  0.14 mm²
• Short-time current
  0.18 kA
• Tightening torque, min
  0.5 Nm
• Tightening torque max
  0.6 Nm
• Conductor cross section AWG min.
  26
• Screw thread
  M3
• ECLASS 11.0
  27141120
• Ambient temperature (actuation)
  -5 °C ... 70 °C
• ECLASS 5.1
  27141100
• ETIM 3.0
  EC000897
• Insulating material
  PA
• Height NS 35/15
  50.3 mm
Stripping length
9 mm
ECLASS 4.0
27141100
ECLASS 7.0
27141120
UNSPSC 20.0
39121410
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
ECLASS 6.0
27141100
Conductor cross section AWG max.
12
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
1.5 mm²
ECLASS 4.1
27141100
UNSPSC 13.2
39121410
ETIM 6.0
EC000897
ETIM 7.0
EC000897
UNSPSC 19.0
39121410
Bending test rotation speed
10 (+/- 2) rpm
Cross section sensor cables, max.
0.34 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
2.5 mm²
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
1.5 mm²
REACh SVHC
Lead 7439-92-1
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.14 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
0.14 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
China RoHS
Environmentally Friendly Use Period = 50 years
UNSPSC 6.01
30211811
UNSPSC 18.0
39121410
Test spectrum
Service life test category 2, bogie-mounted
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Static insulating material application in cold
-60 °C
Color
gray
Insulating material group
I
Result of surge voltage test
Test passed
Open side panel
Yes
Result of power-frequency withstand voltage test
Test passed
Result of flexion and pull-out test
Test passed
Short circuit stability result
Test passed
Result of thermal test
Test passed
Nominal cross section
1.5 mm²
Degree of pollution
3
Connection method
Screw connection
Bending test turns
135
Number of connections
3
Rated surge voltage
8 kV
Maximum power dissipation for nominal condition
0.56 W
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Shock form
Half-sine
Test directions
X-, Y- and Z-axis (pos. and neg.)
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Length
76.4 mm
Nominal voltage UN
800 V
Finger protection
guaranteed
Result of aging test
Test passed
Result of tight fit on support
Test passed
Result of temperature-rise test
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Acceleration
30g
Shock duration
18 ms
Overvoltage category
III
Connection in acc. with standard
CSA
Back of the hand protection
guaranteed
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Height NS 35/7,5
42.8 mm
Conductor cross section flexible, with ferrule without plastic sleeve max.
2.5 mm²
2 conductors with same cross section, solid min.
0.14 mm²
2 conductors with same cross section, stranded min.
0.14 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
Number of levels
1
Flammability rating according to UL 94
V0
Nominal current IN
17.5 A
Bending test conductor cross section/weight
0.2 mm² / 0.2 kg
Setpoint
1 N
Conductor cross section short circuit testing
1.5 mm²
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2018-05
ASD level
6.12 (m/s2)2/Hz
Number of shocks per direction
3
ETIM 2.0
EC000897
UNSPSC 7.0901
39121410
UNSPSC 11
39121410
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
End cover width
2.2 mm
Max. wire diameter incl. insulation
3 mm
Conductor cross section solid max.
4 mm²
Test certificate name
KEMA 04ATEX2226 U
2 conductors with same cross section, solid max.
1.5 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 10.0.1
27141120
ECLASS 5.0
27141100
Cross section sensor cables, min.
0.25 mm²
Conductor cross section flexible min.
0.14 mm²
Max. AWG conductor cross section, flexible
16
Conductor cross section flexible max.
2.5 mm²
2 conductors with same cross section, stranded max.
1.5 mm²
ECLASS 9.0
27141120
UNSPSC 12.01
39121410
UNSPSC 21.0
39121410
Conductor cross section solid min.
0.14 mm²
Min. AWG conductor cross section, flexible
24
Tensile test result
Test passed
ETIM 4.0
EC000897