3050264 Phoenix Contact Terminal Blocks

Product Details

• Nominal cross section
  1.5 mm²
• Flammability rating according to UL 94
  V0
• Maximum load current
  17.5 A (with 1.5 mm² conductor cross section)
• Result of surge voltage test
  Test passed
• Result of flexion and pull-out test
  Test passed
• Result of tight fit on support
  Test passed
• Setpoint
  1 N
• Short-time current
  0.18 kA
• Test specification, oscillation, broadband noise
  DIN EN 50155 (VDE 0115-200):2008-03
• Test directions
  X-, Y- and Z-axis (pos. and neg.)
• Relative insulation material temperature index (Elec., UL 746 B)
  130 °C
• Number of shocks per direction
  3
• Fire protection for rail vehicles (DIN EN 45545-2) R24
  HL 1 - HL 3
• Length
  93.5 mm
• Tightening torque max
  0.6 Nm
• Stripping length
  9 mm
• Min. AWG conductor cross section, flexible
  24
• Conductor cross section flexible, with ferrule with plastic sleeve max.
  2.5 mm²
• 2 conductors with same cross section, solid min.
  0.14 mm²
• Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
  0.14 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 5.1
27141100
ECLASS 7.0
27141120
ETIM 7.0
EC000897
UNSPSC 7.0901
39121410
Number of connections
4
Degree of pollution
3
Nominal current IN
17.5 A
Open side panel
Yes
Bending test rotation speed
10 rpm
Bending test turns
135
Conductor cross section tensile test
4 mm²
Result of temperature-rise test
Test passed
Result of thermal test
Test passed
Acceleration
5g
ASD level
0.02 g²/Hz
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Max. wire diameter incl. insulation
3 mm
Conductor cross section AWG max.
12
Max. AWG conductor cross section, flexible
16
Cross section sensor cables, min.
0.25 mm²
Screw thread
M3
2 conductors with same cross section, solid max.
1.5 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
1.5 mm²
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 5.0
27141100
ECLASS 9.0
27141120
ETIM 6.0
EC000897
UNSPSC 18.0
39121410
Number of levels
2
Insulating material
PA
Overvoltage category
III
Nominal voltage UN
500 V
Finger protection
guaranteed
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Tight fit on carrier
NS 35
Short circuit stability result
Test passed
Result of aging test
Test passed
Oscillation, broadband noise test result
Test passed
Test duration per axis
5 h
Shock duration
30 ms
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Width
5.2 mm
End cover width
2.2 mm
Conductor cross section solid min.
0.14 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.14 mm²
Material wire insulation
PVC / PE
Structure of individual litz in acc. with VDE 0295 / smallest wire diameter
Class 1 to 5
2 conductors with same cross section, stranded max.
1.5 mm²
2 conductors with same cross section, stranded min.
0.14 mm²
ECLASS 11.0
27141120
ECLASS 10.0.1
27141120
ETIM 2.0
EC000897
ETIM 4.0
EC000897
UNSPSC 19.0
39121410
UNSPSC 21.0
39121410
Rated surge voltage
6 kV
Insulating material group
I
Connection method
Screw connection
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Surge voltage test setpoint
7.3 kV
Bending test conductor cross section/weight
0.25 mm² / 0.3 kg
Result of voltage-drop test
Test passed
Requirements, voltage drop
≤ 3.2 mV
Ageing test for screwless modular terminal block temperature cycles
192
Test spectrum
Service life test category 1, class B, body mounted
Shock form
Semi-sinusoidal
Static insulating material application in cold
-60 °C
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Height NS 35/15
63 mm
Conductor cross section AWG min.
26
Conductor cross section flexible min.
0.14 mm²
Cross section sensor cables, max.
0.34 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
2.5 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
1.5 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
REACh SVHC
Lead 7439-92-1
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 4.1
27141100
UNSPSC 11
39121410
UNSPSC 6.01
30211811
UNSPSC 13.2
39121410
Color
gray
Maximum power dissipation for nominal condition
0.56 W (the value is multiplied when connecting multiple levels)
Connection in acc. with standard
CSA
Back of the hand protection
guaranteed
Result of power-frequency withstand voltage test
Test passed
Power frequency withstand voltage setpoint
1.89 kV
Tensile test result
Test passed
Tractive force setpoint
60 N
Conductor cross section short circuit testing
1.5 mm²
Proof of thermal characteristics (needle flame) effective duration
30 s
Test frequency
f1 = 5 Hz to f2 = 150 Hz
Shock test result
Test passed
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Height NS 35/7,5
55.5 mm
Tightening torque, min
0.5 Nm
Conductor cross section solid max.
4 mm²
Conductor cross section flexible max.
2.5 mm²
Internal cylindrical gage
A3 / B2
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.14 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 4.0
27141100
ECLASS 6.0
27141100
ETIM 3.0
EC000897
UNSPSC 12.01
39121410
UNSPSC 20.0
39121410