3031869 Phoenix Contact Terminal Blocks

Product Details

• Number of connections
  2
• Insulating material
  PA
• Color
  gray
• Flammability rating according to UL 94
  V0
• Rated surge voltage
  6 kV
• Open side panel
  Yes
• Result of surge voltage test
  Test passed
• Result of power-frequency withstand voltage test
  Test passed
• Bending test turns
  135
• Tight fit on carrier
  NS 35
• Setpoint
  1 N
• Short circuit stability result
  Test passed
• Result of aging test
  Test passed
• Test specification, oscillation, broadband noise
  DIN EN 50155 (VDE 0115-200):2008-03
• Test duration per axis
  5 h
• Number of shocks per direction
  3
• Calorimetric heat release NFPA 130 (ASTM E 1354)
  27,5 MJ/kg
• Width
  5.2 mm
• Conductor cross section solid min.
  0.08 mm²
• Conductor cross section AWG max.
  12
Conductor cross section flexible, with ferrule with plastic sleeve max.
2.5 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
Nominal cross section
2.5 mm²
Maximum load current
24 A (with 4 mm² conductor cross section)
Insulating material group
I
Maximum power dissipation for nominal condition
0.77 W (the value is multiplied when connecting multiple levels)
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Surge voltage test setpoint
7.3 kV
Bending test conductor cross section/weight
0.08 mm² / 0.1 kg
Tractive force setpoint
60 N
Result of voltage-drop test
Test passed
Conductor cross section short circuit testing
4 mm²
Ageing test for screwless modular terminal block temperature cycles
192
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Acceleration
30g
ASD level
6.12 (m/s2)2/Hz
Shock test result
Test passed
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Static insulating material application in cold
-60 °C
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Conductor cross section solid max.
4 mm²
Conductor cross section flexible min.
0.08 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.14 mm²
Internal cylindrical gage
A3
ECLASS 10.0.1
27141125
ECLASS 4.1
27141100
ETIM 4.0
EC001329
UNSPSC 7.0901
39121410
UNSPSC 12.01
39121410
Number of levels
2
Degree of pollution
3
Overvoltage category
III
Nominal current IN
24 A
Finger protection
guaranteed
Power frequency withstand voltage setpoint
1.89 kV
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Tensile test result
Test passed
Result of tight fit on support
Test passed
Short-time current
0.48 kA
Result of thermal test
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Test directions
X-, Y- and Z-axis (pos. and neg.)
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Height NS 35/7,5
50.5 mm
Conductor cross section flexible max.
4 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
0.5 mm²
Stripping length
10 mm
ECLASS 4.0
27141100
ECLASS 9.0
27141125
ETIM 2.0
EC001329
UNSPSC 11
39121410
UNSPSC 19.0
39121410
Connection in acc. with standard
CSA
Nominal voltage UN
400 V (phase conductor/phase conductor)
Back of the hand protection
guaranteed
Result of flexion and pull-out test
Test passed
Bending test rotation speed
10 rpm
Conductor cross section tensile test
4 mm²
Requirements, voltage drop
≤ 3.2 mV
Result of temperature-rise test
Test passed
Oscillation, broadband noise test result
Test passed
Test spectrum
Service life test category 2, bogie-mounted
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Shock form
Half-sine
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Length
97 mm
Height NS 35/15
58 mm
Conductor cross section flexible, with ferrule without plastic sleeve max.
2.5 mm²
Connection method
Spring-cage connection
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 11.0
27141125
ECLASS 5.0
27141100
ETIM 3.0
EC001329
UNSPSC 6.01
30211811
UNSPSC 18.0
39121410
Shock duration
18 ms
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
End cover width
2.2 mm
Conductor cross section AWG min.
28
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.14 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 7.0
27141125
ETIM 6.0
EC001329
UNSPSC 13.2
39121410
UNSPSC 20.0
39121410
ECLASS 5.1
27141100
ECLASS 6.0
27141100
ETIM 7.0
EC001329
UNSPSC 21.0
39121410