3031665 Phoenix Contact Terminal Blocks

Product Details

• Finger protection
  guaranteed
• Color
  gray
• Maximum power dissipation for nominal condition
  1.02 W
• Maximum load current
  38 A (In the case of a 6 mm² conductor cross section, the maximum load current must not be exceeded by the total current of all connected conductors)
• Calorimetric heat release NFPA 130 (ASTM E 1354)
  27,5 MJ/kg
• Smoke gas toxicity NFPA 130 (SMP 800C)
  passed
• End cover width
  2.2 mm
• Connection method
  Spring-cage connection
• Conductor cross section AWG max.
  10
• Conductor cross section flexible, with ferrule with plastic sleeve min.
  0.14 mm²
• Ambient temperature (storage/transport)
  -25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
• ECLASS 10.0.1
  27141120
• ECLASS 7.0
  27141120
• UNSPSC 12.01
  39121410
• UNSPSC 6.01
  30211811
• Number of connections
  3
• Number of levels
  1
• Insulating material
  PA
• Overvoltage category
  III
• Nominal current IN
  32 A (with 6 mm² conductor cross section)
Back of the hand protection
guaranteed
Result of flexion and pull-out test
Test passed
Tight fit on carrier
NS 35
Setpoint
1 N
Short-time current
0.72 kA
Result of aging test
Test passed
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Degree of pollution
3
Insulating material group
I
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Result of surge voltage test
Test passed
Open side panel
Yes
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Bending test turns
135
Result of tight fit on support
Test passed
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Result of thermal test
Test passed
Ageing test for screwless modular terminal block temperature cycles
192
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Static insulating material application in cold
-60 °C
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Height NS 35/7,5
43 mm
Conductor cross section solid min.
0.08 mm²
Conductor cross section flexible min.
0.08 mm²
Min. AWG conductor cross section, flexible
28
Internal cylindrical gage
A4
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 5.0
27141100
ETIM 3.0
EC000897
ECLASS 9.0
27141120
UNSPSC 7.0901
39121410
UNSPSC 21.0
39121410
ECLASS 4.1
27141100
ETIM 2.0
EC000897
Potentials
1
Flammability rating according to UL 94
V0
Connection in acc. with standard
CSA
Connection
1 level
Max. AWG conductor cross section, flexible
12
UNSPSC 13.2
39121410
UNSPSC 20.0
39121410
Conductor cross section flexible, with ferrule with plastic sleeve max.
4 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
Nominal cross section
4 mm²
Rated surge voltage
8 kV
Nominal voltage UN
800 V
Power frequency withstand voltage setpoint
2 kV
Bending test conductor cross section/weight
0.08 mm² / 0.1 kg
Bending test rotation speed
10 rpm
Result of temperature-rise test
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Conductor cross section short circuit testing
6 mm²
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Length
64.5 mm
Stripping length
8 mm ... 10 mm
Conductor cross section AWG min.
28
Conductor cross section flexible, with ferrule without plastic sleeve max.
4 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 11.0
27141120
ECLASS 5.1
27141100
ECLASS 6.0
27141100
ETIM 4.0
EC000897
ETIM 6.0
EC000897
UNSPSC 19.0
39121410
Result of voltage-drop test
Test passed
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Result of power-frequency withstand voltage test
Test passed
Tensile test result
Test passed
Short circuit stability result
Test passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Width
6.2 mm
Height NS 35/15
50.5 mm
Conductor cross section solid max.
6 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.14 mm²
Conductor cross section flexible max.
4 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
1 mm²
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 4.0
27141100
ETIM 7.0
EC000897
UNSPSC 11
39121410
UNSPSC 18.0
39121410