3031542 Phoenix Contact Terminal Blocks

Product Details

• Smoke gas toxicity NFPA 130 (SMP 800C)
  passed
• Conductor cross section flexible min.
  0.08 mm²
• Conductor cross section solid max.
  6 mm²
• Operating temperature
  -60 °C ... 105 °C (max. short-term operating temperature 130°C)
• Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
  1 mm²
• ECLASS 4.1
  27141100
• ECLASS 7.0
  27141120
• UNSPSC 11
  39121410
• UNSPSC 7.0901
  39121410
• Conductor cross section flexible max.
  4 mm²
• Conductor cross section flexible, with ferrule without plastic sleeve min.
  0.14 mm²
• Ambient temperature (assembly)
  -5 °C ... 70 °C
• ETIM 6.0
  EC000897
• Ambient temperature (storage/transport)
  -25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
• ECLASS 4.0
  27141100
• ECLASS 9.0
  27141120
• UNSPSC 19.0
  39121410
• Fire protection for rail vehicles (DIN EN 45545-2) R22
  HL 1 - HL 3
• Ambient temperature (actuation)
  -5 °C ... 70 °C
• ETIM 2.0
  EC000897
ECLASS 5.1
27141100
UNSPSC 12.01
39121410
UNSPSC 20.0
39121410
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Height NS 35/7,5
47.5 mm
Conductor cross section AWG min.
28
Conductor cross section flexible, with ferrule with plastic sleeve max.
4 mm²
ETIM 3.0
EC000897
UNSPSC 13.2
39121410
UNSPSC 21.0
39121410
Tight fit on carrier
NS 35
Requirements, voltage drop
≤ 3.2 mV
Ageing test for screwless modular terminal block temperature cycles
192
ASD level
6.12 (m/s2)2/Hz
Test directions
X-, Y- and Z-axis (pos. and neg.)
Relative insulation material temperature index (Elec.; UL 746 B)
130 °C
Nominal cross section
4 mm²
Insulating material group
I
Maximum power dissipation for nominal condition
1.02 W (the value is multiplied when connecting multiple levels)
Open side panel
Yes
Surge voltage test setpoint
7.3 kV
Bending test rotation speed
10 rpm
Nominal voltage UN
500 V
Result of flexion and pull-out test
Test passed
Bending test conductor cross section/weight
0.08 mm² / 0.1 kg
Setpoint
1 N
Conductor cross section short circuit testing
6 mm²
Result of thermal test
Test passed
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Acceleration
30g
Shock form
Half-sine
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Length
83.5 mm
Color
gray
Area of application
Railway industry
Connection in acc. with standard
CSA
Bending test turns
135
Conductor cross section tensile test
6 mm²
Result of temperature-rise test
Test passed
Short circuit stability result
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Number of connections
4
Rated surge voltage
6 kV
Overvoltage category
III
Back of the hand protection
guaranteed
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Shock duration
18 ms
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Height NS 35/15
55 mm
Conductor cross section AWG max.
10
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.14 mm²
Stripping length
8 mm ... 10 mm
ECLASS 5.0
27141100
ETIM 4.0
EC000897
UNSPSC 6.01
30211811
Number of levels
2
Flammability rating according to UL 94
V0
Degree of pollution
3
Finger protection
guaranteed
Power frequency withstand voltage setpoint
1.89 kV
Checking the mechanical stability of terminal points (5 x conductor connection)
Test passed
Tensile test result
Test passed
Result of tight fit on support
Test passed
Result of aging test
Test passed
Test spectrum
Service life test category 2, bogie-mounted
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Shock test result
Test passed
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
End cover width
2.2 mm
Insulating material
PA
Nominal current IN
30 A
Maximum load current
32 A (with 6 mm² conductor cross section)
Result of surge voltage test
Test passed
Result of power-frequency withstand voltage test
Test passed
Tractive force setpoint
80 N
Result of voltage-drop test
Test passed
Short-time current
0.72 kA
Oscillation, broadband noise test result
Test passed
Test duration per axis
5 h
Number of shocks per direction
3
ETIM 7.0
EC000897
ECLASS 10.0.1
27141120
UNSPSC 18.0
39121410
ECLASS 11.0
27141120
ECLASS 6.0
27141100
Surface flammability NFPA 130 (ASTM E 162)
passed
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
Conductor cross section flexible, with ferrule without plastic sleeve max.
4 mm²
Width
6.2 mm
Connection method
Spring-cage connection
Permissible humidity (storage/transport)
30 % ... 70 %
Conductor cross section solid min.
0.08 mm²
Static insulating material application in cold
-60 °C