3031445 Phoenix Contact Terminal Blocks

3031445 Product Details

• Conductor cross section flexible, with ferrule without plastic sleeve min.
  0.14 mm²
• Overvoltage category
  III
• Degree of pollution
  3
• Nominal cross section
  4 mm²
• Maximum load current
  40 A (In the case of a 6 mm² conductor cross section, the maximum load current must not be exceeded by the total current of all connected conductors)
• Finger protection
  guaranteed
• ETIM 7.0
  EC000897
• Number of levels
  1
• Insulating material
  PA
• Area of application
  Railway industry
• Back of the hand protection
  guaranteed
• Nominal voltage UN
  800 V
• Number of connections
  4
• Color
  gray
• Flammability rating according to UL 94
  V0
• Insulating material group
  I
• Open side panel
  Yes
• Power frequency withstand voltage setpoint
  2 kV
• Bending test conductor cross section/weight
  0.08 mm² / 0.1 kg
• Result of voltage-drop test
  Test passed
Short circuit stability result
Test passed
Oscillation, broadband noise test result
Test passed
Test duration per axis
5 h
Shock form
Half-sine
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
Height NS 35/15
44 mm
Conductor cross section short circuit testing
6 mm²
Result of thermal test
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Length
87 mm
Nominal current IN
32 A (with 6 mm² conductor cross section)
Result of power-frequency withstand voltage test
Test passed
Bending test rotation speed
10 rpm
Tensile test result
Test passed
Setpoint
1 N
Short-time current
0.72 kA
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
ASD level
6.12 (m/s2)2/Hz
Test directions
X-, Y- and Z-axis (pos. and neg.)
Number of shocks per direction
3
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
End cover width
2.2 mm
Connection
1 level
Conductor cross section solid min.
0.08 mm²
Conductor cross section AWG max.
10
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
Potentials
1
Rated surge voltage
8 kV
Maximum power dissipation for nominal condition
1.02 W
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Result of surge voltage test
Test passed
Bending test turns
135
Note
The max. load current must not be exceeded by the total current of all connected conductors.
Acceleration
30g
Shock duration
18 ms
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Result of flexion and pull-out test
Test passed
Result of tight fit on support
Test passed
Result of temperature-rise test
Test passed
Result of aging test
Test passed
Test spectrum
Service life test category 2, bogie-mounted
Connection in acc. with standard
CSA
Min. AWG conductor cross section, flexible
28
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
1 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 5.1
27141100
ECLASS 6.0
27141100
UNSPSC 6.01
30211811
UNSPSC 18.0
39121410
UNSPSC 21.0
39121410
ETIM 4.0
EC000897
UNSPSC 12.01
39121410
UNSPSC 19.0
39121410
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Tight fit on carrier
NS 35
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Ageing test for screwless modular terminal block temperature cycles
192
Shock test result
Test passed
Static insulating material application in cold
-60 °C
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Width
6.2 mm
Height NS 35/7,5
36.5 mm
Stripping length
8 mm ... 10 mm
Conductor cross section flexible min.
0.08 mm²
Max. AWG conductor cross section, flexible
12
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 5.0
27141100
ECLASS 9.0
27141120
UNSPSC 7.0901
39121410
Ambient temperature (actuation)
-5 °C ... 70 °C
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Conductor cross section flexible, with ferrule without plastic sleeve max.
4 mm²
UNSPSC 11
39121410
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Conductor cross section AWG min.
28
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.14 mm²
ECLASS 11.0
27141120
ETIM 3.0
EC000897
Conductor cross section flexible max.
4 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
4 mm²
Internal cylindrical gage
A4
ECLASS 4.1
27141100
ETIM 6.0
EC000897
UNSPSC 13.2
39121410
UNSPSC 20.0
39121410
ECLASS 4.0
27141100
Connection method
Spring-cage connection
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ETIM 2.0
EC000897
Conductor cross section solid max.
6 mm²
ECLASS 10.0.1
27141120
ECLASS 7.0
27141120

Product condition