3029973 Phoenix Contact Terminal Blocks

Product Details

• Nominal cross section
  6 mm²
• Insulating material group
  I
• Nominal voltage UN
  400 V
• Surge voltage test setpoint
  7.2 kV
• Result of the test for mechanical stability of terminal points (5 x conductor connection)
  Test passed
• Conductor cross section tensile test
  10 mm²
• Tractive force setpoint
  90 N
• Number of levels
  1
• Insulating material
  PA
• Overvoltage category
  III
• Back of the hand protection
  guaranteed
• Result of surge voltage test
  Test passed
• Bending test turns
  135
• Bending test conductor cross section/weight
  1 mm² / 0.4 kg
• Short circuit stability result
  Test passed
• Result of thermal test
  Test passed
• Number of connections
  2
• Rated surge voltage
  6 kV
• Maximum load current
  45 A (with 10 mm² conductor cross section)
• Shock protection test specification
  DIN EN 50274 (VDE 0660-514):2002-11
Power frequency withstand voltage setpoint
1.89 kV
Result of flexion and pull-out test
Test passed
Setpoint
5 N
Result of tight fit on support
Test passed
Short-time current
0.72 kA
ASD level
6.12 (m/s2)2/Hz
Shock duration
18 ms
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Connection
1 level
ECLASS 5.0
27141100
Potentials
1
Degree of pollution
3
Maximum power dissipation for nominal condition
1.31 W
Nominal current IN
41 A
Result of power-frequency withstand voltage test
Test passed
Bending test rotation speed
10 rpm
Requirements, voltage drop
U1 ≤ 3,2 mVU2 ≤ 1,5 x U1dT ≤ 45 K
Proof of thermal characteristics (needle flame) effective duration
30 s
Acceleration
30g
Shock test result
Test passed
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Height NS 35/7,5
49 mm
Connection in acc. with standard
CUL
Color
gray
Flammability rating according to UL 94
V0
Open side panel
Yes
Width
8.2 mm
Tight fit on carrier
NS 32/NS 35
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2018-05
Test duration per axis
5 h
Surface flammability NFPA 130 (ASTM E 162)
passed
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Finger protection
guaranteed
Tensile test result
Test passed
Conductor cross section short circuit testing
6 mm²
Ageing test for screwless modular terminal block temperature cycles
192
Test spectrum
Service life test category 2, bogie-mounted
Number of shocks per direction
3
Static insulating material application in cold
-60 °C
End cover width
2 mm
Connection method
Spring-cage connection
Conductor cross section solid max.
10 mm²
Conductor cross section solid min.
0.2 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.25 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
1.5 mm²
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 4.1
27141100
ECLASS 7.0
27141120
UNSPSC 6.01
30211811
UNSPSC 7.0901
39121410
UNSPSC 19.0
39121410
Conductor cross section AWG max.
8
Max. AWG conductor cross section, flexible
10
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
ECLASS 5.1
27141100
UNSPSC 20.0
39121410
Stripping length
12 mm
Conductor cross section flexible max.
6 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
6 mm²
Min. AWG conductor cross section, flexible
24
ECLASS 4.0
27141100
UNSPSC 21.0
39121410
Conductor cross section AWG min.
24
Conductor cross section flexible, with ferrule with plastic sleeve max.
6 mm²
ECLASS 11.0
27141120
Test directions
X-, Y- and Z-axis (pos. and neg.)
Shock form
Half-sine
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Height NS 35/15
56.5 mm
Length
113 mm
Conductor cross section flexible min.
0.2 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.25 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
Ambient temperature (assembly)
-5 °C ... 70 °C
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 10.0.1
27141120
ECLASS 6.0
27141100
ECLASS 9.0
27141120
ETIM 4.0
EC000897
ETIM 3.0
EC000897
ETIM 6.0
EC000897
UNSPSC 18.0
39121410
UNSPSC 13.2
39121410
ETIM 7.0
EC000897
UNSPSC 11
39121410
ETIM 2.0
EC000897
UNSPSC 12.01
39121410