3029538 Phoenix Contact Terminal Blocks

Product Details

• Color
  orange
• Degree of pollution
  3
• Number of positions
  1
• Surge voltage test setpoint
  7.3 kV
• Power frequency withstand voltage setpoint
  1.89 kV
• Conductor cross section tensile test
  6 mm²
• Tight fit on carrier
  NS 32/NS 35
• Relative insulation material temperature index (Elec., UL 746 B)
  130 °C
• Smoke gas toxicity NFPA 130 (SMP 800C)
  passed
• Fire protection for rail vehicles (DIN EN 45545-2) R24
  HL 1 - HL 3
• Flammability rating according to UL 94
  V0
• Overvoltage category
  III
• Shock protection test specification
  DIN EN 50274 (VDE 0660-514):2002-11
• Tensile test result
  Test passed
• Bending test conductor cross section/weight
  0.2 mm² / 0.2 kg
• Setpoint
  1 N
• Short circuit stability result
  Test passed
• Short-time current
  0.18 kA
• Specific optical density of smoke NFPA 130 (ASTM E 662)
  passed
• Width
  6.2 mm
Height NS 35/15
66 mm
Conductor cross section AWG min.
24
2 conductors with same cross section, solid max.
1.5 mm²
2 conductors with same cross section, solid min.
0.2 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 125°C)
Connection in acc. with standard
CSA
ECLASS 11.0
27141126
ECLASS 5.1
27141100
UNSPSC 6.01
30211811
UNSPSC 13.2
39121410
Number of levels
1
Insulating material
PA
Nominal current IN
16 A
Insulating material group
I
Finger protection
guaranteed
Back of the hand protection
guaranteed
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Requirements, voltage drop
≤ 6,4 mV
Conductor cross section short circuit testing
1.5 mm²
Result of thermal test
Test passed
Static insulating material application in cold
-60 °C
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Length
51 mm
Conductor cross section flexible max.
4 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
2.5 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
0.25 mm²
Screw thread
M3
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 4.1
27141100
ECLASS 6.0
27141100
ETIM 3.0
EC000902
UNSPSC 7.0901
39121410
UNSPSC 19.0
39121410
Number of connections
2
Rated surge voltage
6 kV
Nominal voltage UN
500 V
Maximum power dissipation for nominal condition
1.02 W
Result of flexion and pull-out test
Test passed
Result of tight fit on support
Test passed
Result of temperature-rise test
Test passed
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Conductor cross section solid max.
4 mm²
Conductor cross section flexible min.
0.2 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
4 mm²
2 conductors with same cross section, stranded max.
1.5 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
2.5 mm²
Connection method
Screw connection
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 10.0.1
27141126
ECLASS 4.0
27141100
ETIM 4.0
EC000902
ETIM 6.0
EC000902
UNSPSC 21.0
39121410
Nominal cross section
4 mm²
Maximum load current
16 A (with 4 mm² conductor cross section)
Open side panel
No
Result of surge voltage test
Test passed
Result of power-frequency withstand voltage test
Test passed
Tractive force setpoint
80 N
Result of voltage-drop test
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Surface flammability NFPA 130 (ASTM E 162)
passed
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Height NS 32
63.5 mm
Conductor cross section AWG max.
12
2 conductors with same cross section, stranded min.
0.2 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
1.5 mm²
Internal cylindrical gage
A3
Ambient temperature (assembly)
-5 °C ... 70 °C
REACh SVHC
Lead 7439-92-1
ECLASS 5.0
27141100
ECLASS 9.0
27141126
ETIM 7.0
EC000902
UNSPSC 11
39121410
UNSPSC 20.0
39121410
Height NS 35/7,5
58.5 mm
Conductor cross section solid min.
0.2 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.25 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.25 mm²
Stripping length
8 mm
Tightening torque, min
0.5 Nm
Tightening torque max
0.6 Nm
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 7.0
27141126
ETIM 2.0
EC000902
UNSPSC 12.01
39121410
UNSPSC 18.0
39121410