3010136 Phoenix Contact Terminal Blocks

3010136 Product Details

• UNSPSC 13.2
  39121410
• ETIM 7.0
  EC000897
• UNSPSC 11
  39121410
• Number of connections
  2
• Degree of pollution
  3
• Nominal voltage UN
  1000 V
• Result of power-frequency withstand voltage test
  Test passed
• Bending test turns
  135
• Tight fit on carrier
  NS 32/NS 35
• Requirement temperature-rise test
  Increase in temperature ≤ 45 K
• Proof of thermal characteristics (needle flame) effective duration
  30 s
• Note
  Note: Product releases, connection cross sections and notes on connecting aluminum cables can be found in the download area.
• Nominal cross section
  95 mm²
• Flammability rating according to UL 94
  V0
• Maximum load current
  232 A
• Width
  25 mm
• Number of levels
  1
• Potentials
  1
• Maximum power dissipation for nominal condition
  7.54 W
• Overvoltage category
  III
Number of positions
1
Insulating material
PA
Rated surge voltage
8 kV
Color
blue
Insulating material group
I
Result of surge voltage test
Test passed
Back of the hand protection
guaranteed
Length
83 mm
Nominal current IN
232 A
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Tensile test result
Test passed
Result of voltage-drop test
Test passed
Bending test conductor cross section/weight
25 mm² / 4.5 kg
Tractive force setpoint
351 N
Result of tight fit on support
Test passed
Short circuit stability result
Test passed
Test spectrum
Service life test category 2, bogie-mounted
Conductor cross section tensile test
95 mm²
Open side panel
No
Conductor cross section short circuit testing
95 mm²
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2018-05
Result of flexion and pull-out test
Test passed
Height
90 mm
Requirements, voltage drop
U1 ≤ 3,2 mVU2 ≤ 1,5 x U1dT ≤ 45 K
Short-time current
11.4 kA
ASD level
6.12 (m/s2)2/Hz
Shock protection test specification
IEC 60529:2013-08
Finger protection
guaranteed
Power frequency withstand voltage setpoint
2.2 kV
Bending test rotation speed
10 rpm
Result of temperature-rise test
Test passed
Acceleration
30g
Number of shocks per direction
3
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Stripping length
33 mm
Tightening torque max
20 Nm
Test duration per axis
5 h
ECLASS 10.0.1
27141120
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 7.0
27141120
ECLASS 5.1
27141100
ETIM 4.0
EC000897
UNSPSC 6.01
30211811
UNSPSC 18.0
39121410
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Shock duration
18 ms
Test directions
X-, Y- and Z-axis (pos. and neg.)
Shock form
Half-sine
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Cross section with insertion bridge, stranded max.
70 mm²
ECLASS 4.1
27141100
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Conductor cross section flexible max.
95 mm²
Max. AWG conductor cross section, flexible
3/0
Conductor cross section flexible, with ferrule with plastic sleeve max.
95 mm²
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Height NS 32
95 mm
Tightening torque, min
15 Nm
Conductor cross section AWG max.
3/0
Min. AWG conductor cross section, flexible
2
2 conductors with same cross section, solid max.
35 mm²
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Connection in acc. with standard
CSA
Cross section with insertion bridge, solid max.
95 mm²
2 conductors with same cross section, stranded min.
25 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 9.0
27141120
UNSPSC 12.01
39121410
Result of thermal test
Test passed
Static insulating material application in cold
-60 °C
Connection method
Screw connection
Conductor cross section solid max.
95 mm²
Conductor cross section AWG min.
4
Conductor cross section flexible, with ferrule without plastic sleeve min.
35 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
35 mm²
2 conductors with same cross section, stranded max.
35 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 11.0
27141120
Height NS 35/15
97.5 mm
Screw thread
M8
Conductor cross section solid min.
25 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
95 mm²
2 conductors with same cross section, solid min.
25 mm²
ECLASS 4.0
27141100
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
ETIM 3.0
EC000897
UNSPSC 19.0
39121410
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Conductor cross section flexible min.
35 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
16 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 125°C)
ETIM 6.0
EC000897
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
35 mm²
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 5.0
27141100
ECLASS 6.0
27141100
ETIM 2.0
EC000897
UNSPSC 7.0901
39121410
UNSPSC 20.0
39121410
UNSPSC 21.0
39121410

Product condition