3007110 Phoenix Contact Terminal Blocks

Product Details

• Color
  gray
• Screw thread
  M3
• Nominal cross section
  4 mm²
• Degree of pollution
  3
• Number of levels
  1
• Flammability rating according to UL 94
  V2
• Nominal current IN
  32 A (with 6 mm² conductor cross section)
• Finger protection
  guaranteed
• Back of the hand protection
  guaranteed
• Bending test rotation speed
  10 rpm
• Requirements, voltage drop
  U1 ≤ 3,2 mVU2 ≤ 1,5 x U1dT ≤ 45 K
• Requirement temperature-rise test
  Increase in temperature ≤ 45 K
• Test frequency
  f1 = 5 Hz to f2 = 250 Hz
• Shock duration
  18 ms
• Width
  6.2 mm
• Height NS 32
  52 mm
• Connection in acc. with standard
  IEC 60947-7-1
• Conductor cross section flexible max.
  4 mm²
• Potentials
  1
• Rated surge voltage
  8 kV
Nominal voltage UN
630 V
Surge voltage test setpoint
9.6 kV
Tight fit on carrier
NS 32/NS 35
Short circuit stability result
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Acceleration
30g
Test duration per axis
5 h
Relative insulation material temperature index (Elec., UL 746 B)
125 °C
Connection
1 level
Stripping length
8 mm
Conductor cross section flexible min.
0.2 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.25 mm²
Cross section with insertion bridge, solid max.
2.5 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
1 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 11.0
27141120
ECLASS 6.0
27141100
ETIM 7.0
EC000897
UNSPSC 13.2
39121410
UNSPSC 18.0
39121410
Number of connections
4
Insulating material
PA
Insulating material group
I
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Maximum load current
32 A (In the case of a 6 mm² conductor cross section, the maximum load current must not be exceeded by the total current of all connected conductors)
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Power frequency withstand voltage setpoint
1.89 kV
Result of voltage-drop test
Test passed
Short-time current
0.48 kA
Test spectrum
Service life test category 2, bogie-mounted
Test directions
X-, Y- and Z-axis (pos. and neg.)
Number of shocks per direction
3
End cover width
1.5 mm
Tightening torque, min
0.5 Nm
Conductor cross section AWG min.
24
Max. AWG conductor cross section, flexible
12
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.25 mm²
2 conductors with same cross section, stranded min.
0.2 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 10.0.1
27141120
ECLASS 5.1
27141100
ECLASS 9.0
27141120
ETIM 4.0
EC000897
UNSPSC 6.01
30211811
UNSPSC 20.0
39121410
Overvoltage category
III
Result of surge voltage test
Test passed
Result of flexion and pull-out test
Test passed
Result of tight fit on support
Test passed
Result of temperature-rise test
Test passed
Conductor cross section short circuit testing
4 mm²
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2018-05
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Height NS 35/7,5
47 mm
Note
Terminal point
Tightening torque max
0.6 Nm
Conductor cross section solid min.
0.2 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
4 mm²
2 conductors with same cross section, solid min.
0.2 mm²
Internal cylindrical gage
A3
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
REACh SVHC
Lead 7439-92-1
ECLASS 5.0
27141100
ETIM 2.0
EC000897
UNSPSC 7.0901
39121410
UNSPSC 21.0
39121410
Maximum power dissipation for nominal condition
1.02 W
Open side panel
Yes
Result of power-frequency withstand voltage test
Test passed
Bending test turns
135
Tensile test result
Test passed
Result of thermal test
Test passed
ASD level
6.12 (m/s2)2/Hz
Shock form
Half-sine
Length
63.5 mm
Height NS 35/15
54.5 mm
Connection method
Screw connection
Conductor cross section solid max.
6 mm²
Conductor cross section AWG max.
10
Min. AWG conductor cross section, flexible
24
Cross section with insertion bridge, stranded max.
2.5 mm²
2 conductors with same cross section, stranded max.
1.5 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
1.5 mm²
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 4.1
27141100
ETIM 6.0
EC000897
UNSPSC 11
39121410
Conductor cross section flexible, with ferrule with plastic sleeve max.
1.5 mm²
2 conductors with same cross section, solid max.
1 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
0.25 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 125°C)
ECLASS 4.0
27141100
ECLASS 7.0
27141120
ETIM 3.0
EC000897
UNSPSC 12.01
39121410
UNSPSC 19.0
39121410