3004430 Phoenix Contact Terminal Blocks

Product Details

• Number of connections
  2
• Degree of pollution
  3
• Insulating material group
  I
• Finger protection
  guaranteed
• Color
  gray
• Nominal current IN
  16 A
• Maximum power dissipation for nominal condition
  1.02 W
• Result of surge voltage test
  Test passed
• Result of tight fit on support
  Test passed
• Proof of thermal characteristics (needle flame) effective duration
  30 s
• Acceleration
  30g
• Shock duration
  18 ms
• Specific optical density of smoke NFPA 130 (ASTM E 662)
  passed
• Fire protection for rail vehicles (DIN EN 45545-2) R24
  HL 1 - HL 3
• Width
  6.2 mm
• Height NS 32
  63.5 mm
• Conductor cross section flexible, with ferrule with plastic sleeve max.
  2.5 mm²
• 2 conductors with same cross section, stranded max.
  1.5 mm²
• Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
  1.5 mm²
• Stripping length
  8 mm
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 125°C)
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 5.0
27141100
ETIM 3.0
EC000902
UNSPSC 7.0901
39121410
UNSPSC 19.0
39121410
Number of levels
1
Rated surge voltage
6 kV
Connection in acc. with standard
IEC 60947-7-1
Maximum load current
16 A (with 4 mm² conductor cross section)
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Bending test rotation speed
10 rpm
Tight fit on carrier
NS 35/NS 32
Test spectrum
Service life test category 2, bogie-mounted
Test directions
X-, Y- and Z-axis (pos. and neg.)
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Height NS 35/15
66 mm
Conductor cross section flexible max.
4 mm²
Conductor cross section AWG max.
10
2 conductors with same cross section, solid min.
0.2 mm²
Cross section with insertion bridge, solid max.
4 mm²
Tightening torque, min
0.5 Nm
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 4.1
27141100
ECLASS 9.0
27141126
ETIM 6.0
EC000902
UNSPSC 12.01
39121410
UNSPSC 21.0
39121410
Nominal cross section
4 mm²
Flammability rating according to UL 94
V0
Nominal voltage UN
500 V
Power frequency withstand voltage setpoint
1.89 kV
Result of flexion and pull-out test
Test passed
Ageing test for screwless modular terminal block temperature cycles
192
Result of thermal test
Test passed
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Shock form
Semi-sinusoidal
Static insulating material application in cold
-60 °C
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Length
51 mm
Conductor cross section flexible min.
0.2 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.25 mm²
2 conductors with same cross section, stranded min.
0.2 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Internal cylindrical gage
A3
Screw thread
M3
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 7.0
27141126
ETIM 7.0
EC000902
UNSPSC 13.2
39121410
UNSPSC 20.0
39121410
Insulating material
PA
Overvoltage category
III
Open side panel
No
Back of the hand protection
guaranteed
Result of power-frequency withstand voltage test
Test passed
Bending test turns
135
Short circuit stability result
Test passed
ASD level
6.12 (m/s2)2/Hz
Number of shocks per direction
3
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Height NS 35/7,5
58.5 mm
Conductor cross section solid max.
6 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
4 mm²
2 conductors with same cross section, solid max.
1.5 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
2.5 mm²
Cross section with insertion bridge, stranded max.
4 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 10.0.1
27141126
ECLASS 5.1
27141100
ECLASS 6.0
27141100
UNSPSC 6.01
30211811
UNSPSC 18.0
39121410
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Setpoint
1 N
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2018-05
Test duration per axis
5 h
Surface flammability NFPA 130 (ASTM E 162)
passed
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Conductor cross section solid min.
0.2 mm²
Conductor cross section AWG min.
24
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.25 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
0.25 mm²
Connection method
Screw connection
Tightening torque max
0.6 Nm
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 4.0
27141100
ECLASS 11.0
27141126
ETIM 2.0
EC000902
ETIM 4.0
EC000902
UNSPSC 11
39121410