3004155 Phoenix Contact Terminal Blocks

Product Details

• Nominal cross section
  4 mm²
• Maximum power dissipation for nominal condition
  1.02 W
• Overvoltage category
  III
• Maximum load current
  6.3 A
• Open side panel
  No
• Number of connections
  2
• Flammability rating according to UL 94
  V2
• Degree of pollution
  3
• Connection in acc. with standard
  CSA
• Nominal voltage UN
  800 V (As a fuse terminal block)
• UNSPSC 7.0901
  39121410
• UNSPSC 20.0
  39121410
• UNSPSC 19.0
  39121410
• Number of levels
  1
• Rated surge voltage
  8 kV
• LED voltage range
  500 V AC/DC
• Shock protection test specification
  DIN EN 50274 (VDE 0660-514):2002-11
• Result of surge voltage test
  Test passed
• Result of tight fit on support
  Test passed
• Result of flexion and pull-out test
  Test passed
Bending test conductor cross section/weight
0.2 mm² / 0.2 kg
Result of thermal test
Test passed
Test spectrum
Service life test category 1, class B, body mounted
Test directions
X-, Y- and Z-axis (pos. and neg.)
Shock form
Half-sine
Width
8.2 mm
Conductor cross section solid min.
0.2 mm²
Conductor cross section AWG min.
24
Cross section with insertion bridge, solid max.
4 mm²
2 conductors with same cross section, solid max.
1.5 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
1.5 mm²
Internal cylindrical gage
A4
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 4.0
27141100
ECLASS 5.0
27141100
ECLASS 5.1
27141100
ETIM 6.0
EC000899
UNSPSC 12.01
39121410
UNSPSC 21.0
39121410
Note
Swing the locking lever to its final position before replacing the fuse.
Insulating material
PA
Rated operating voltage
250 V
Nominal current IN
6.3 A
Fuse type
Glass / ceramics / ...
Back of the hand protection
guaranteed
Power frequency withstand voltage setpoint
2 kV
Contact resistance
Test passed
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Testing the rated value of the power dissipation (overload and short circuit Protection)
Test passed
Oscillation, broadband noise test result
Test passed
Test duration per axis
5 h
Relative insulation material temperature index (Elec., UL 746 B)
125 °C
Shock duration
30 ms
Length
72.5 mm
Conductor cross section solid max.
4 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.25 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
4 mm²
2 conductors with same cross section, solid min.
0.2 mm²
Connection method
Screw connection
Tightening torque, min
0.6 Nm
Permissible humidity (storage/transport)
30 % ... 70 %
REACh SVHC
Lead 7439-92-1
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 6.0
27141100
ETIM 2.0
EC000897
ETIM 7.0
EC000899
UNSPSC 11
39121410
Color
black
Insulating material group
I
Fuse
G / 5 x 20
Finger protection
guaranteed
Result of power-frequency withstand voltage test
Test passed
Actuatiing forces on plug in or lever in fuse insert carriers
Test passed
Bending test turns
135
Result of temperature-rise test
Test passed
Test frequency
f1 = 5 Hz to f2 = 150 Hz
Acceleration
5g
Shock test result
Test passed
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Height NS 32
61.5 mm
Height NS 35/15
64 mm
Conductor cross section AWG max.
12
Conductor cross section flexible, with ferrule without plastic sleeve max.
4 mm²
Cross section with insertion bridge, stranded max.
4 mm²
2 conductors with same cross section, stranded min.
0.2 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Stripping length
8 mm
Screw thread
M3
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 125°C)
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 11.0
27141116
ECLASS 7.0
27141116
ETIM 4.0
EC000899
ETIM 3.0
EC000899
UNSPSC 18.0
39121410
Surge voltage test setpoint
9.8 kV
Compatibitity between modular fuse terminal block and fuse insert
Test passed
Bending test rotation speed
10 rpm
Testing the rated value of the power dissipation (exclusively short circuit protection)
Test passed
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
ASD level
1.857 (m/s2)2/Hz
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Number of shocks per direction
3
Height NS 35/7,5
56.5 mm
Conductor cross section flexible min.
0.2 mm²
Conductor cross section flexible max.
4 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.25 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
0.25 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
1.5 mm²
Tightening torque max
0.8 Nm
ECLASS 4.1
27141100
ECLASS 10.0.1
27141116
ECLASS 9.0
27141116
UNSPSC 6.01
30211811
UNSPSC 13.2
39121410
2 conductors with same cross section, stranded max.
1.5 mm²