3004058 Phoenix Contact Terminal Blocks

Product Details

• Insulating material
  PA
• Degree of pollution
  3
• Number of positions
  1
• Power frequency withstand voltage setpoint
  1.89 kV
• Result of flexion and pull-out test
  Test passed
• Result of tight fit on support
  Test passed
• Short circuit stability result
  Test passed
• Short-time current
  0.18 kA
• Surface flammability NFPA 130 (ASTM E 162)
  passed
• Calorimetric heat release NFPA 130 (ASTM E 1354)
  28 MJ/kg
• Height NS 32
  63.5 mm
• Conductor cross section flexible max.
  4 mm²
• Number of connections
  2
• Flammability rating according to UL 94
  V0
• Connection in acc. with standard
  CSA
• Nominal voltage UN
  500 V
• Result of surge voltage test
  Test passed
• Conductor cross section tensile test
  6 mm²
• Setpoint
  1 N
• Conductor cross section short circuit testing
  1.5 mm²
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Conductor cross section solid max.
4 mm²
Conductor cross section AWG min.
24
2 conductors with same cross section, stranded max.
1.5 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
0.25 mm²
Connection method
Screw connection
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 125°C)
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 4.1
27141100
ETIM 3.0
EC000902
UNSPSC 13.2
39121410
UNSPSC 19.0
39121410
Color
blue
Insulating material group
I
Open side panel
No
Maximum power dissipation for nominal condition
1.02 W
Surge voltage test setpoint
7.3 kV
Tensile test result
Test passed
Tractive force setpoint
80 N
Tight fit on carrier
NS 32/NS 35
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Length
51 mm
Height NS 35/15
66 mm
Conductor cross section AWG max.
12
Conductor cross section flexible, with ferrule with plastic sleeve max.
2.5 mm²
2 conductors with same cross section, solid min.
0.2 mm²
Cross section with insertion bridge, stranded max.
2.5 mm²
Screw thread
M3
Tightening torque, min
0.5 Nm
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 5.1
27141100
ETIM 2.0
EC000902
ETIM 6.0
EC000902
UNSPSC 18.0
39121410
Number of levels
1
Overvoltage category
III
Nominal current IN
20 A (with 4 mm² conductor cross section)
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Back of the hand protection
guaranteed
Result of power-frequency withstand voltage test
Test passed
Bending test conductor cross section/weight
0.2 mm² / 0.2 kg
Result of voltage-drop test
Test passed
Result of temperature-rise test
Test passed
Result of thermal test
Test passed
Static insulating material application in cold
-60 °C
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Width
6.2 mm
Conductor cross section flexible min.
0.2 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.25 mm²
2 conductors with same cross section, stranded min.
0.2 mm²
Stripping length
8 mm
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
REACh SVHC
Lead 7439-92-1
ECLASS 4.0
27141100
ECLASS 6.0
27141100
ETIM 4.0
EC000902
UNSPSC 7.0901
39121410
UNSPSC 12.01
39121410
Nominal cross section
4 mm²
Rated surge voltage
6 kV
Maximum load current
20 A (with 4 mm² conductor cross section)
Finger protection
guaranteed
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Requirements, voltage drop
≤ 6,4 mV
Proof of thermal characteristics (needle flame) effective duration
30 s
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Height NS 35/7,5
58.5 mm
Conductor cross section solid min.
0.2 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.25 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
1.5 mm²
Cross section with insertion bridge, solid max.
4 mm²
Tightening torque max
0.6 Nm
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 10.0.1
27141126
ECLASS 7.0
27141126
ETIM 7.0
EC000902
UNSPSC 11
39121410
Conductor cross section flexible, with ferrule without plastic sleeve max.
4 mm²
2 conductors with same cross section, solid max.
1.5 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
2.5 mm²
Internal cylindrical gage
A3
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 11.0
27141126
ECLASS 5.0
27141100
ECLASS 9.0
27141126
UNSPSC 6.01
30211811
UNSPSC 20.0
39121410
UNSPSC 21.0
39121410