3001682 Phoenix Contact Terminal Blocks

3001682 Product Details

• UNSPSC 6.01
  30211811
• Number of connections
  3
• Flammability rating according to UL 94
  V0
• Maximum power dissipation for nominal condition
  0.56 W (the value is multiplied when connecting multiple levels)
• Finger protection
  guaranteed
• Result of flexion and pull-out test
  Test passed
• Tensile test result
  Test passed
• Setpoint
  1 N
• Conductor cross section short circuit testing
  1.5 mm²
• Relative insulation material temperature index (Elec.; UL 746 B)
  130 °C
• Fire protection for rail vehicles (DIN EN 45545-2) R23
  HL 1 - HL 3
• End cover width
  1 mm
• Nominal cross section
  1.5 mm²
• Overvoltage category
  III
• Connection in acc. with standard
  CSA
• Nominal voltage UN
  400 V
• Result of surge voltage test
  Test passed
• Bending test conductor cross section/weight
  0.14 mm² / 0.2 kg
• Result of voltage-drop test
  Test passed
• Result of thermal test
  Test passed
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Height NS 15
24.4 mm
Conductor cross section AWG max.
16
2 conductors with same cross section, stranded min.
0.14 mm²
Stripping length
6 mm
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 11.0
27141120
ECLASS 4.1
27141100
ECLASS 9.0
27141120
ETIM 7.0
EC000897
Insulating material
PA
Degree of pollution
3
Maximum load current
17.5 A (in case of a 1.5 mm² conductor cross section, the maximum load current must not be exceeded by the total current of all connected conductors.)
Back of the hand protection
guaranteed
Surge voltage test setpoint
4.8 kV
Bending test rotation speed
10 rpm
Tractive force setpoint
40 N
Result of temperature-rise test
Test passed
Short-time current
0.18 kA
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Width
4.2 mm
Conductor cross section flexible max.
1.5 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
0.75 mm²
2 conductors with same cross section, solid min.
0.14 mm²
2 conductors with same cross section, stranded max.
0.5 mm²
Internal cylindrical gage
A1
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 5.1
27141100
ETIM 3.0
EC000897
UNSPSC 7.0901
39121410
UNSPSC 20.0
39121410
Open side panel
Yes
Color
gray
Nominal current IN
17.5 A
Shock protection test specification
IEC 60529:2001-02
Power frequency withstand voltage setpoint
1.89 kV
Checking the mechanical stability of terminal points (5 x conductor connection)
Test passed
Conductor cross section tensile test
1.5 mm²
Short circuit stability result
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Length
27.8 mm
Conductor cross section solid min.
0.14 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.25 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.25 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
0.34 mm²
Screw thread
M2
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
China RoHS
Environmentally Friendly Use Period = 50 years
ETIM 4.0
EC000897
UNSPSC 11
39121410
UNSPSC 19.0
39121410
Number of levels
2
Rated surge voltage
4 kV
Insulating material group
I
Result of power-frequency withstand voltage test
Test passed
Bending test turns
135
Result of tight fit on support
Test passed
Tight fit on carrier
NS 15
Requirements, voltage drop
≤ 3.2 mV
Static insulating material application in cold
-60 °C
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Connection method
Screw connection
Conductor cross section solid max.
1.5 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
0.75 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
0.25 mm²
Tightening torque, min
0.22 Nm
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 10.0.1
27141120
ECLASS 6.0
27141100
ECLASS 5.0
27141100
ETIM 6.0
EC000897
UNSPSC 13.2
39121410
Conductor cross section flexible min.
0.14 mm²
Conductor cross section AWG min.
26
2 conductors with same cross section, solid max.
0.5 mm²
Tightening torque max
0.25 Nm
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 4.0
27141100
ECLASS 7.0
27141120
ETIM 2.0
EC000897
UNSPSC 12.01
39121410
UNSPSC 21.0
39121410
UNSPSC 18.0
39121410

Product condition