3001035 Phoenix Contact Terminal Blocks

Product Details

• Number of connections
  2
• Color
  gray
• Open side panel
  Yes
• Finger protection
  guaranteed
• Tensile test result
  Test passed
• Nominal cross section
  2.5 mm²
• Degree of pollution
  3
• Back of the hand protection
  guaranteed
• Result of surge voltage test
  Test passed
• Bending test rotation speed
  10 rpm
• Tight fit on carrier
  NS 32/NS 35
• Result of temperature-rise test
  Test passed
• Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
  130 °C
• Static insulating material application in cold
  -60 °C
• Fire protection for rail vehicles (DIN EN 45545-2) R26
  HL 1 - HL 3
• Height NS 35/7,5
  42 mm
• Height NS 32
  47 mm
• Conductor cross section solid max.
  4 mm²
• Min. AWG conductor cross section, flexible
  24
• 2 conductors with same cross section, solid min.
  0.2 mm²
2 conductors with same cross section, solid max.
1 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
1.5 mm²
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 4.0
27141100
ECLASS 9.0
27141120
ETIM 6.0
EC000897
UNSPSC 7.0901
39121410
UNSPSC 21.0
39121410
Insulating material
PA
Overvoltage category
III
Nominal current IN
24 A
Shock protection test specification
IEC 60529:2001-02
Result of flexion and pull-out test
Test passed
Bending test conductor cross section/weight
0.2 mm² / 0.2 kg
Result of voltage-drop test
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Width
6.2 mm
Height NS 35/15
49.5 mm
Conductor cross section solid min.
0.2 mm²
Tightening torque max
0.8 Nm
Max. AWG conductor cross section, flexible
14
Conductor cross section flexible, with ferrule with plastic sleeve max.
1 mm²
2 conductors with same cross section, stranded max.
1 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
0.25 mm²
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 5.0
27141100
ETIM 2.0
EC000897
ETIM 4.0
EC000897
UNSPSC 18.0
39121410
UNSPSC 20.0
39121410
Number of levels
1
Flammability rating according to UL 94
V0
Insulating material group
I
Nominal voltage UN
690 V
Result of power-frequency withstand voltage test
Test passed
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Result of tight fit on support
Test passed
Short-time current
0.48 kA
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Length
42.5 mm
Tightening torque, min
0.6 Nm
Conductor cross section flexible max.
2.5 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.25 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
2.5 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
1 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
ECLASS 11.0
27141120
ECLASS 4.1
27141100
ETIM 3.0
EC000897
UNSPSC 13.2
39121410
Potentials
1
Rated surge voltage
8 kV
Maximum power dissipation for nominal condition
0.77 W
Power frequency withstand voltage setpoint
1.89 kV
Bending test turns
135
Setpoint
1 N
Short circuit stability result
Test passed
Result of thermal test
Test passed
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
End cover width
1.5 mm
Connection method
Screw connection
Stripping length
7 mm
Conductor cross section AWG max.
12
Conductor cross section flexible min.
0.2 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Internal cylindrical gage
A3
Ambient temperature (actuation)
-5 °C ... 70 °C
REACh SVHC
Lead 7439-92-1
ECLASS 5.1
27141100
ECLASS 7.0
27141120
UNSPSC 6.01
30211811
UNSPSC 12.01
39121410
UNSPSC 19.0
39121410
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Conductor cross section short circuit testing
4 mm²
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Screw thread
M3
Conductor cross section AWG min.
30
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.25 mm²
2 conductors with same cross section, stranded min.
0.25 mm²
Connection in acc. with standard
CSA
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 10.0.1
27141120
ECLASS 6.0
27141100
ETIM 7.0
EC000897
UNSPSC 11
39121410