3000562 Phoenix Contact Terminal Blocks

3000562 Product Details

• Number of levels
  1
• Insulating material
  PA
• Degree of pollution
  3
• Insulating material group
  I
• Nominal voltage UN
  800 V
• Result of surge voltage test
  Test passed
• Bending test rotation speed
  10 (+/- 2) rpm
• Setpoint
  1 N
• Short-time current
  0.72 kA
• Color
  gray
• Rated surge voltage
  8 kV
• Nominal current IN
  32 A
• Back of the hand protection
  guaranteed
• Result of power-frequency withstand voltage test
  Test passed
• Tight fit on carrier
  NS 32/NS 35
• Conductor cross section short circuit testing
  6 mm²
• Test duration per axis
  5 h
• Test directions
  X-, Y- and Z-axis (pos. and neg.)
• Static insulating material application in cold
  -60 °C
• Height NS 35/7,5
  40.3 mm
Conductor cross section flexible max.
4 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.25 mm²
2 conductors with same cross section, stranded min.
0.2 mm²
Number of connections
2
Flammability rating according to UL 94
V0
Connection in acc. with standard
UL
Maximum load current
32 A (with 4 mm² conductor cross section)
Finger protection
guaranteed
Surge voltage test setpoint
9.8 kV
Bending test turns
135
Result of temperature-rise test
Test passed
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2018-05
ASD level
6.12 (m/s2)2/Hz
Acceleration
30g
Number of shocks per direction
3
Width
8.2 mm
Conductor cross section flexible min.
0.2 mm²
Conductor cross section solid max.
6 mm²
Maximum power dissipation for nominal condition
1.02 W
Power frequency withstand voltage setpoint
0.002 kV
Result of flexion and pull-out test
Test passed
Bending test conductor cross section/weight
0.5 mm² / 0.3 kg
Short circuit stability result
Test passed
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Shock duration
18 ms
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Length
58 mm
Height NS 35/15
47.8 mm
Conductor cross section AWG min.
24
Conductor cross section flexible, with ferrule without plastic sleeve max.
4 mm²
2 conductors with same cross section, solid max.
1.5 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
1.5 mm²
Tightening torque, min
0.6 Nm
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 10.0.1
27141120
ECLASS 5.1
27141100
ECLASS 9.0
27141120
UNSPSC 13.2
39121410
UNSPSC 20.0
39121410
Nominal cross section
4 mm²
Overvoltage category
III
Open side panel
Yes
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Result of tight fit on support
Test passed
Result of thermal test
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
End cover width
2.2 mm
Conductor cross section solid min.
0.2 mm²
Conductor cross section AWG max.
10
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.25 mm²
Cross section with insertion bridge, solid max.
4 mm²
Connection method
Screw connection
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 4.1
27141100
ECLASS 5.0
27141100
UNSPSC 7.0901
39121410
UNSPSC 21.0
39121410
Test spectrum
Service life test category 2, bogie-mounted
Shock form
Half-sine
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Height NS 32
45.3 mm
2 conductors with same cross section, solid min.
0.2 mm²
2 conductors with same cross section, stranded max.
1.5 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Stripping length
8 mm
Tightening torque max
0.8 Nm
Ambient temperature (actuation)
-5 °C ... 70 °C
REACh SVHC
Lead 7439-92-1
ECLASS 4.0
27141100
ETIM 3.0
EC000897
UNSPSC 11
39121410
UNSPSC 19.0
39121410
Conductor cross section flexible, with ferrule with plastic sleeve max.
2.5 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
0.25 mm²
Internal cylindrical gage
A4
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 11.0
27141120
ECLASS 7.0
27141120
ETIM 6.0
EC000897
UNSPSC 6.01
30211811
UNSPSC 18.0
39121410
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
2.5 mm²
Cross section with insertion bridge, stranded max.
4 mm²
Screw thread
M3
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 6.0
27141100
ETIM 4.0
EC000902
ETIM 7.0
EC000897
UNSPSC 12.01
39121410

Product condition