3000539 Phoenix Contact Terminal Blocks

3000539 Product Details

• ECLASS 5.1
  27141100
• Maximum power dissipation for nominal condition
  1.6 W
• ECLASS 4.0
  27141100
• Color
  black
• Nominal cross section
  4 mm²
• Insulating material group
  I
• Maximum load current
  6.3 A (the current is determined by the fuse used)
• Open side panel
  Yes
• Back of the hand protection
  guaranteed
• Result of surge voltage test
  Test passed
• Result of tight fit on support
  Test passed
• Result of the test for mechanical stability of terminal points (5 x conductor connection)
  Test passed
• Bending test conductor cross section/weight
  0.5 mm² / 0.3 kg
• Result of thermal test
  Test passed
• ASD level
  1.857 (m/s2)2/Hz
• Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
  1.5 mm²
• ECLASS 9.0
  27141116
• Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
  2.5 mm²
• Tightening torque, min
  0.6 Nm
• Internal cylindrical gage
  A4
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Permissible humidity (storage/transport)
30 % ... 70 %
REACh SVHC
Lead 7439-92-1
ECLASS 10.0.1
27141116
ECLASS 11.0
27141116
ECLASS 6.0
27141100
ECLASS 5.0
27141100
ECLASS 7.0
27141116
ETIM 3.0
EC000899
ETIM 7.0
EC000899
UNSPSC 6.01
30211811
UNSPSC 11
39121410
UNSPSC 12.01
39121410
UNSPSC 18.0
39121410
UNSPSC 21.0
39121410
ETIM 6.0
EC000899
ETIM 2.0
EC000897
ETIM 4.0
EC000899
UNSPSC 7.0901
39121410
UNSPSC 13.2
39121410
UNSPSC 19.0
39121410
UNSPSC 20.0
39121410
Note
The current is determined by the fuse used, the voltage by the fuse or selected light indicator.
Flammability rating according to UL 94
V0
Connection in acc. with standard
IEC 60947-7-3
Nominal voltage UN
500 V (As a fuse terminal block)
Contact resistance
Test passed
Bending test rotation speed
10 rpm
Testing the rated value of the power dissipation (exclusively short circuit protection)
Test passed
Oscillation, broadband noise test result
Test passed
Test duration per axis
5 h
Number of levels
1
Degree of pollution
3
Nominal current IN
6.3 A
Result of power-frequency withstand voltage test
Test passed
Compatibitity between modular fuse terminal block and fuse insert
Test passed
Bending test turns
135
Test spectrum
Service life test category 1, class B, body mounted
Acceleration
5g
Test directions
X-, Y- and Z-axis (pos. and neg.)
Shock form
Half-sine
Length
58 mm
Conductor cross section flexible max.
4 mm²
Conductor cross section AWG min.
24
2 conductors with same cross section, stranded min.
0.2 mm²
Screw thread
M3
Tightening torque max
0.8 Nm
Overvoltage category
III
Number of positions
1
Power frequency withstand voltage setpoint
1.5 kV
Shock duration
30 ms
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Height NS 32
55 mm
Conductor cross section solid min.
0.2 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
4 mm²
Cross section with insertion bridge, solid max.
4 mm²
2 conductors with same cross section, solid min.
0.2 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Ambient temperature (actuation)
-5 °C ... 70 °C
Number of connections
2
Rated surge voltage
6 kV
Maximum power dissipation
max. 1.6 W (with single arrangement of the fuse terminal block in the event of overload)
Fuse type
Glass / ceramics / ...
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Actuatiing forces on plug in or lever in fuse insert carriers
Test passed
Testing the rated value of the power dissipation (overload and short circuit Protection)
Test passed
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Shock test result
Test passed
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Conductor cross section solid max.
6 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.25 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
2.5 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
0.25 mm²
Stripping length
8 mm
China RoHS
Environmentally Friendly Use Period = 50 years
Insulating material
PA
Fuse
G / 5 x 20
Finger protection
guaranteed
Surge voltage test setpoint
4.8 kV
Result of flexion and pull-out test
Test passed
Result of temperature-rise test
Test passed
Test frequency
f1 = 5 Hz to f2 = 150 Hz
Number of shocks per direction
3
End cover width
2.2 mm
Height NS 35/7,5
50 mm
Conductor cross section flexible min.
0.2 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.25 mm²
2 conductors with same cross section, solid max.
1.5 mm²
Connection method
Screw connection
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 4.1
27141100
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Static insulating material application in cold
-60 °C
Width
8.2 mm
Height NS 35/15
57.6 mm
Conductor cross section AWG max.
10
Cross section with insertion bridge, stranded max.
4 mm²
2 conductors with same cross section, stranded max.
1.5 mm²
Ambient temperature (assembly)
-5 °C ... 70 °C

Product condition