2986588 Phoenix Contact Electrical Safety Devices

2986588 Product Details

• Depth
  114.5 mm
• Ambient temperature (operation)
  -20 °C ... 55 °C (observe derating)
• Inrush current
  max. 100 mA
• Maximum switching frequency
  0.5 Hz
• Minimum switching voltage
  15 V AC/DC (N/O contact / N/C contact)
• Switching capacity
  min. 75 mW
• Net weight
  137.7 g
• Housing material
  PBT
• Conductor cross section flexible
  0.2 mm² ... 1.5 mm²
• Stop category
  0
• Performance level (PL)
  c (Diagnostic coverage (DC) of the control unit at A1/A2 must be ≥ 90 %)
• Width
  17.5 mm
• Input voltage range
  20.4 V DC ... 26.4 V DC
• Recovery time
  1 s
• Contact type
  2 enabling current paths
• Limiting continuous current
  5 A (N/O contact, pay attention to the derating)
• Maximum inrush current
  5 A (N/O contact)
• Relay type
  Electromechanical relay with force-guided contacts in accordance with IEC/EN 61810-3
• Nominal operating mode
  100% operating factor
• Connection method
  Push-in connection
Conductor cross-section flexible with ferrule without plastic sleeve
0.25 mm² ... 1.5 mm² (only together with CRIMPFOX 6)
Standards/regulations
DIN EN 50178/VDE 0160
Overvoltage category
III
Conformance
CE-compliant
ECLASS 11.0
27371819
ECLASS 6.0
27371800
ETIM 3.0
EC001449
UNSPSC 6.01
30211901
UNSPSC 12.01
39121501
UNSPSC 19.0
39122205
Ambient temperature (storage/transport)
-40 °C ... 70 °C
Rated control supply current IS
typ. 55 mA
Typical release time
50 ms
Operating voltage display
1 x yellow LED
Inrush current, minimum
5 mA (N/O contact / N/C contact)
Interrupting rating (ohmic load) max.
120 W (24 V DC, τ = 0 ms, N/C contact: 2.4 W)
Maximum interrupting rating (inductive load)
72 W (24 V DC, τ = 40 ms, N/C contact: 2.4 W)
Housing color
yellow
Conductor cross-section AWG
24 ... 16
Safety Integrity Level (SIL)
2
Safety Integrity Level Claim Limit (SIL CL)
1 (max. 10% of the entire SIL; diagnostic coverage (DC) of the control unit at A1/A2 must be ≥ 90% )
Rated surge voltage/insulation
Safe isolation, reinforced insulation 6 kV between the control circuits (A1/A2), (31/32), (13/14, 23/24)
Shock
15g
ECLASS 10.0.1
27371819
ECLASS 5.1
27371900
ECLASS 7.0
27371819
UNSPSC 7.0901
39121501
ETIM 6.0
EC001449
UNSPSC 11
39121501
Utilization restriction
EMC: class A product, see manufacturer's declaration in the download area
Max. permissible relative humidity (operation)
75 % (on average, 85% infrequently, non-condensing)
Rated control circuit supply voltage US
24 V DC -15 % / +10 %
Typ. starting time with Us
50 ms
Protective circuit
Surge protection Suppressor diode, 33 V (A1 - A2)
Maximum switching voltage
250 V AC/DC (N/O contact / N/C contact, observe the load curve)
Mechanical service life
10x 106 cycles
Mounting type
DIN rail mounting
Min. degree of protection of inst. location
IP54
Conductor cross section solid
0.2 mm² ... 1.5 mm²
Conductor cross-section flexible with ferrule and plastic sleeve
0.25 mm² ... 1.5 mm² (only together with CRIMPFOX 6)
Category
1 (Diagnostic coverage (DC) of the control unit at A1/A2 must be ≥ 90 %)
Rated insulation voltage
250 V AC
Vibration (operation)
10 Hz ... 150 Hz, 2g
ECLASS 4.0
40020600
ECLASS 4.1
40020600
ETIM 2.0
EC001449
ETIM 4.0
EC001449
UNSPSC 18.0
39122205
UNSPSC 21.0
39122205
Height
112 mm
Max. permissible humidity (storage/transport)
75 % (on average, 85% infrequently, non-condensing)
Maximum altitude
≤ 2000 m (Above sea level)
Power consumption at US
typ. 1.32 W
Filter time
max. 5 ms (at A1 in the event of voltage dips at Us)
Contact material
AgCuNi, + 0.2 µm Au
Sq. Total current
50 A2 (observe derating)
Output fuse
10 A gL/gG (N/O contact)
Mounting position
any
Degree of protection
IP20
pluggable
Yes
Stripping length
8 mm
Designation
Air clearances and creepage distances between the power circuits
Degree of pollution
2
China RoHS
Environmentally Friendly Use Period = 50 years
REACh SVHC
Lead 7439-92-1
ECLASS 5.0
27371900
ECLASS 9.0
27371819
ETIM 7.0
EC001449
UNSPSC 13.2
39121501
UNSPSC 20.0
39122205

Product condition