2986106 Phoenix Contact Electrical Safety Devices

2986106 Product Details

• Utilization restriction
  EMC: class A product, see manufacturer's declaration in the download area
• Max. permissible relative humidity (operation)
  75 % (On average, 85 % occasionally)
• Air pressure (operation)
  70 kPa ... 108 kPa (up to 3000 m above sea level)
• Contact material
  AgSnO2 (From HW03)AgCuNi + 0.2 - 0.4 μm Au (up to HW02)
• Switching current
  min. 3 mA (as of HW 03)
• Width
  22.5 mm
• Ambient temperature (storage/transport)
  -20 °C ... 70 °C
• Status display
  4 x green LEDs
• Number of outputs
  4
• Switching capacity
  min. 60 mW
• Type of protection
  Yes, within the scope of the operating voltage limits
• Degree of protection
  IP20
• Connection method
  Push-in connection
• Stripping length
  8 mm
• Safety Integrity Level (SIL)
  max. 3 (Reference IEC 61508)
• Pollution degree
  2
• ECLASS 11.0
  27371819
• ECLASS 7.0
  27371819
• ETIM 6.0
  EC001449
• UNSPSC 7.0901
  39121501
UNSPSC 21.0
39122205
Depth
114.5 mm
Maximum altitude
max. 2000 m (See Appendix "Using PSR-TRISAFE modules at altitudes greater than 2000 m above sea level")
Air pressure (storage/transport)
66 kPa ... 108 kPa (up to 3500 m above sea level)
Switching voltage
min. 12 V AC/DC (as of HW 03)
Limiting continuous current
50 mA
Recovery time
< 10 s
Mounting position
On horizontal DIN rail
pluggable
Yes
Performance level (PL)
c (1-channel parameterization)
Stop category
0
Category
1 (1-channel parameterization)
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 4.0
27371100
UNSPSC 6.01
30211901
UNSPSC 11
39121501
UNSPSC 18.0
39122205
Height
112 mm
Max. permissible humidity (storage/transport)
75 % (On average, 85 % occasionally)
Rated control supply current IS
Electrical supply via PSR-TBUS
Output description
Digital
Mechanical service life
10x 106 cycles
Short-circuit protection
Yes
Mounting type
DIN rail mounting
Net weight
140 g
Conductor cross section solid
0.2 mm² ... 1.5 mm²
Conductor cross-section flexible with ferrule and plastic sleeve
0.25 mm² ... 1.5 mm² (only together with CRIMPFOX 6)
Safety Integrity Level Claim Limit (SIL CL)
1 (1-channel parameterization)
Rated surge voltage/insulation
4 kV / basic insulation between output contact current paths (13/14, 23/24, 33/34, 43/44); 6 kV / safe isolation, reinforced insulation between output contact current paths (13/14, 23/24, 33/34, 43/44) and the other circuits
Shock (operation)
10g (Δt = 11 ms, three shocks in each space direction)
ECLASS 4.1
27371100
ETIM 4.0
EC001417
UNSPSC 12.01
39121501
UNSPSC 20.0
39122205
Ambient temperature (operation)
-20 °C ... 55 °C
Rated control circuit supply voltage US
24 V DC (Electrical supply via PSR-TBUS)
Protective circuit
Yes, within the scope of the operating voltage limits
Contact type
4 relay output contacts
Voltage
24 V DC (Supply via A1/A2)
Output fuse
6 A (gL / gG)
Response time
max. 50 ms
Housing color
yellow
Min. degree of protection of inst. location
IP54
Conductor cross-section flexible with ferrule without plastic sleeve
0.25 mm² ... 1.5 mm² (only together with CRIMPFOX 6)
Rated insulation voltage
250 V AC
Vibration (operation)
2g
REACh SVHC
Lead 7439-92-1
ECLASS 5.1
27242700
ECLASS 9.0
27371819
ETIM 3.0
EC001449
UNSPSC 19.0
39122205
Nominal operating mode
100% operating factor
Housing material
Polyamide PA non-reinforced
Conductor cross-section AWG
24 ... 16
Designation
Air clearances and creepage distances between the power circuits
Standards/regulations
DIN EN 50178
Overvoltage category
III
ECLASS 10.0.1
27371819
ECLASS 5.0
27242700
ECLASS 6.0
27371800
ETIM 7.0
EC001449
UNSPSC 13.2
39122329

Product condition