2986012 Phoenix Contact Electrical Safety Devices
Part#:2986012
Manufacturer:Phoenix Contact
Product Lifecycle:Active
In-stock parts: 57
Nov 21, 2024
Freely configurable safety module with 20 safe inputs and 4 safe outputs; 4 alarm, 2 clock, and 2 ground switching outputs; can be extended with additional I/O modules, up to SILCL 3, Cat.4/PL e, SIL 3, EN 50156, plug-in screw connection terminal blocks
About the manufacturer: Phoenix Contact is one of the manufacturers that offers Electrical Safety Devices that you can order at Quotebeam.com. Phoenix Contact manufactures industrial electrical and electronic technology products that offer power, protection, connectivity, and automation for systems and equipment.
Check out the 2986012 Phoenix Contact price in the box on the right side or send a quick quote.
Product Details
- ECLASS 7.0 27371819
- Width 67.5 mm
- Rated control circuit supply voltage US 24 V DC (A1/A2)
- Description of the input Digital, type HTL
- Input voltage range "1" signal 11 V DC ... 30 V DC
- Nominal output voltage range 18 V DC ... 30 V DC (Incl. all tolerances, incl. residual ripple)
- Test pulses < 1 ms
- Nominal operating mode 100% operating factor
- Degree of protection IP20
- Housing color yellow
- pluggable Yes
- Conductor cross-section AWG 24 ... 12
- Safety Integrity Level Claim Limit (SIL CL) 2 (1-channel parameterization)
- Pollution degree 2
- ECLASS 10.0.1 27371819
- ECLASS 6.0 27371800
- Depth 114.5 mm
- Maximum altitude max. 2000 m (See Appendix "Using PSR-TRISAFE modules at altitudes greater than 2000 m above sea level")
- Air pressure (storage/transport) 66 kPa ... 108 kPa (up to 3500 m above sea level)
- Number of inputs 10 (Two-channel, up to SIL 3)
- Nominal output voltage 24 V DC (Supply via 24 V/0 V)
- Leakage current max. 2 mA
- Short-circuit protection Yes
- Response time max. 30 ms (plus response time of PSR-TS-SDOR4)
- Housing material Polyamide PA non-reinforced
- Conductor cross section solid 0.2 mm² ... 2.5 mm²
- Screw thread M3
- Category 2 (1-channel parameterization)
- Standards/regulations DIN EN 50178
- ECLASS 4.0 40020600
- ETIM 2.0 EC001449
- ETIM 3.0 EC001449
- UNSPSC 6.01 30211901
- UNSPSC 20.0 39122205
- Height 99 mm
- Max. permissible humidity (storage/transport) 75 % (On average, 85 % occasionally)
- Status display 4 x LED green (1 LED per output)
- Input voltage range "0" signal 0 V DC ... 5 V DC (for safe Off)
- Number of outputs 4
- Max. capacitive load max. 1 µF (Electronic components)
- Recovery time < 10 s
- Mounting type DIN rail mounting
- Number of possible extension modules 1 (Max. continuous current via PSR-TBUS: 4 A)
- Conductor cross section flexible 0.2 mm² ... 2.5 mm²
- Designation Air clearances and creepage distances between the power circuits
- Safety Integrity Level (SIL) max. 3 (Reference IEC 61508)
- Overvoltage category III
- ECLASS 11.0 27371819
- ECLASS 5.1 27371900
- ETIM 6.0 EC001449
- UNSPSC 18.0 39122205
- UNSPSC 19.0 39122205
- Utilization restriction EMC: class A product, see manufacturer's declaration in the download area
- Ambient temperature (storage/transport) -20 °C ... 70 °C
- Air pressure (operation) 70 kPa ... 108 kPa (up to 3000 m above sea level)
- Limiting continuous current 100 mA
- Cable length max. 2000 m
- Output voltage < 5 V (Low state)
- Note on protection circuit Yes, within the scope of the operating voltage limits
- Voltage 24 V DC (Supply via 24 V/0 V)
- Net weight 154 g
- Number of possible safe extension modules 10 (Max. continuous current via PSR-TBUS: 4 A)
- Connection method Screw connection
- Stop category 0
- Vibration (operation) 2g
- China RoHS Environmentally Friendly Use Period = 50 years
- ECLASS 5.0 27371900
- ECLASS 9.0 27371819
- ETIM 4.0 EC001449
- UNSPSC 7.0901 39121501
- UNSPSC 13.2 39121501
- Ambient temperature (operation) -20 °C ... 55 °C
- Max. permissible relative humidity (operation) 75 % (On average, 85 % occasionally)
- Rated control supply current IS typ. 110 mA
- Protective circuit Yes, within the scope of the operating voltage limits
- Filter time typ. 20 ms (Load-dependent, in the event of voltage dips at US)
- Current consumption typ. 4 mA
- Max. inductive load See "Protective circuit"
- Output description Digital
- Mounting position On horizontal DIN rail
- Min. degree of protection of inst. location IP54
- Stripping length 7 mm
- Torque 0.5 Nm ... 0.6 Nm
- Performance level (PL) d (1-channel parameterization)
- REACh SVHC Lead 7439-92-1
- Shock (operation) 10g (Δt = 11 ms, three shocks in each space direction)
- ECLASS 4.1 40020600
- ETIM 7.0 EC001449
- UNSPSC 12.01 39121501
- UNSPSC 21.0 39122205
- UNSPSC 11 39121501
Product condition
ORIGINAL PACKAGING
SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging
This item can ship within 24h!
1-year warranty
$1,433.67
Stock:
57
Select Qty:
$1,433.67
$1,433.67 each
By purchasing this item, you agree to the Terms & Conditions
Quotebeam is NOT an authorized distributor of Phoenix Contact
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Phoenix Contact Disclaimer:
The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Phoenix Contact Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Phoenix Contact, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Relevant products
Do you have questions?
We’re here for you ✨
We are a proud member of:
