2986232 Phoenix Contact Electrical Safety Devices
Part#:2986232
Manufacturer:Phoenix Contact
Product Lifecycle:Active
Get a quick Quote!
Freely configurable safety module with 20 safe inputs and 4 safe outputs, 4 signal, 2 clock, and 2 ground switching outputs; diagnostics possible via bus gateways, up to SILCL 3, Cat. 4/PL e, SIL 3, EN 50156, pluggable Push-in terminal block
About the manufacturer: Phoenix Contact is one of the manufacturers that offers Electrical Safety Devices that you can order at Quotebeam.com. Phoenix Contact manufactures industrial electrical and electronic technology products that offer power, protection, connectivity, and automation for systems and equipment.
Check out the 2986232 Phoenix Contact price in the box on the right side or send a quick quote.
Product Details
- Max. permissible relative humidity (operation) 75 % (On average, 85 % occasionally)
- Air pressure (storage/transport) 66 kPa ... 108 kPa (up to 3500 m above sea level)
- Maximum altitude max. 2000 m (See Appendix "Using PSR-TRISAFE modules at altitudes greater than 2000 m above sea level")
- Protective circuit Yes, within the scope of the operating voltage limits
- Input voltage range "1" signal 11 V DC ... 30 V DC
- Leakage current max. 2 mA
- Output description Digital
- Utilization restriction EMC: class A product, see manufacturer's declaration in the download area
- Ambient temperature (operation) -20 °C ... 55 °C
- Rated control circuit supply voltage US 24 V DC (A1/A2)
- Status display 4 x LED green (1 LED per output)
- Current consumption typ. 4 mA
- Nominal output voltage 24 V DC (Supply via 24 V/0 V)
- Output voltage < 5 V (Low state)
- Mounting type DIN rail mounting
- Degree of protection IP20
- Conductor cross-section AWG 24 ... 16
- Category 2 (1-channel parameterization)
- Pollution degree 2
- China RoHS Environmentally Friendly Use Period = 50 years
- ECLASS 5.0 27371900
- ECLASS 9.0 27371819
- ETIM 4.0 EC001449
- UNSPSC 11 39121501
- UNSPSC 18.0 39122205
- Height 112 mm
- Air pressure (operation) 70 kPa ... 108 kPa (up to 3000 m above sea level)
- Filter time typ. 20 ms (Load-dependent, in the event of voltage dips at US)
- Number of inputs 10 (Two-channel, up to SIL 3)
- Cable length max. 2000 m
- Test pulses < 1 ms
- Short-circuit protection Yes
- Recovery time < 10 s
- Housing color yellow
- Connection method Push-in connection
- Stripping length 8 mm
- Safety Integrity Level (SIL) max. 3 (Reference IEC 61508)
- Safety Integrity Level Claim Limit (SIL CL) 2 (1-channel parameterization)
- Shock (operation) 10g (Δt = 11 ms, three shocks in each space direction)
- ECLASS 7.0 27371819
- ETIM 6.0 EC001449
- UNSPSC 19.0 39122205
- Depth 114.5 mm
- Max. permissible humidity (storage/transport) 75 % (On average, 85 % occasionally)
- Rated control supply current IS typ. 110 mA
- Input voltage range "0" signal 0 V DC ... 5 V DC (for safe Off)
- Nominal output voltage range 18 V DC ... 30 V DC (Incl. all tolerances, incl. residual ripple)
- Note on protection circuit Yes, within the scope of the operating voltage limits
- Response time max. 30 ms (plus response time of PSR-TS-SDOR4)
- Mounting position On horizontal DIN rail
- pluggable Yes
- Conductor cross-section flexible with ferrule and plastic sleeve 0.25 mm² ... 1.5 mm² (only together with CRIMPFOX 6)
- Performance level (PL) d (1-channel parameterization)
- Overvoltage category III
- ECLASS 10.0.1 27371819
- ECLASS 5.1 27371900
- ETIM 3.0 EC001449
- ETIM 7.0 EC001449
- UNSPSC 13.2 39121501
- Width 67.5 mm
- Ambient temperature (storage/transport) -20 °C ... 70 °C
- Limiting continuous current 100 mA
- Description of the input Digital, type HTL
- Number of outputs 4
- Max. inductive load See "Protective circuit"
- Voltage 24 V DC (Supply via 24 V/0 V)
- Nominal operating mode 100% operating factor
- Housing material Polyamide PA non-reinforced
- Conductor cross section solid 0.2 mm² ... 1.5 mm²
- Conductor cross-section flexible with ferrule without plastic sleeve 0.25 mm² ... 1.5 mm² (only together with CRIMPFOX 6)
- Designation Air clearances and creepage distances between the power circuits
- Vibration (operation) 2g
- ECLASS 4.0 40020600
- ECLASS 11.0 27371819
- ETIM 2.0 EC001449
- UNSPSC 6.01 30211901
- UNSPSC 7.0901 39121501
- UNSPSC 20.0 39122205
- Max. capacitive load max. 1 µF (Electronic components)
- Net weight 300 g
- Min. degree of protection of inst. location IP54
- Number of possible extension modules 1 (Max. continuous current via PSR-TBUS: 4 A)
- Stop category 0
- Standards/regulations DIN EN 50178
- REACh SVHC Lead 7439-92-1
- ECLASS 4.1 40020600
- ECLASS 6.0 27371800
- UNSPSC 12.01 39121501
- UNSPSC 21.0 39122205
Product condition
ORIGINAL PACKAGING
SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging
1-year warranty
Get a quick Quote!
Request a quote, and we will send you price and availability within minutes.
Select Qty:
Average response time: 11 minutes
By purchasing this item, you agree to the Terms & Conditions
Quotebeam is NOT an authorized distributor of Phoenix Contact
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Phoenix Contact Disclaimer:
The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Phoenix Contact Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Phoenix Contact, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Relevant products
Do you have questions?
We’re here for you ✨
We are a proud member of:
