2963802 Phoenix Contact Electrical Safety Devices
Part#:2963802
Manufacturer:Phoenix Contact
Product Lifecycle:Active
In-stock parts: 6
Nov 21, 2024
Safety relay for emergency stop and safety door up to SIL 1, SIL CL 1, Cat. 1, PL c, depending on the application up to SIL 3, SIL CL 3, Cat. 4, PL e, single-channel operation, 4 enabling current paths, US = 24 V AC/DC, plug-in screw terminal blocks
About the manufacturer: Phoenix Contact is one of the manufacturers that offers Electrical Safety Devices that you can order at Quotebeam.com. Phoenix Contact manufactures industrial electrical and electronic technology products that offer power, protection, connectivity, and automation for systems and equipment.
Check out the 2963802 Phoenix Contact price in the box on the right side or send a quick quote.
Product Details
- Max. permissible relative humidity (operation) 75 % (on average, 85% infrequently, non-condensing)
- Power consumption at US typ. 3.36 W (AC)
- Typical release time < 45 ms (when controlled via S12)
- Recovery time < 1 s
- Filter time 2 ms (at A1 in the event of voltage dips at Us)
- Sq. Total current 72 A2 (observe derating)
- Mechanical service life 10x 106 cycles
- Relay type Electromechanical relay with force-guided contacts in accordance with IEC/EN 61810-3
- Degree of protection IP20
- Conductor cross section solid 0.2 mm² ... 2.5 mm²
- Stop category 0
- Category 1 (up to Cat. 4 depending on the application)
- Rated insulation voltage 250 V AC
- ECLASS 11.0 27371819
- ETIM 2.0 EC000196
- ETIM 7.0 EC001449
- UNSPSC 12.01 39121501
- UNSPSC 20.0 39122205
- Utilization restriction EMC: class A product, see manufacturer's declaration in the download area
- Depth 114.5 mm
- Ambient temperature (operation) -20 °C ... 65 °C (observe derating)
- Maximum altitude ≤ 2000 m (Above sea level)
- Voltage at input/start and feedback circuit 24 V DC -15 % / +10 %
- Typical response time < 65 ms (automatic start)
- Protective circuit Surge protection Suppressor diode
- Contact material AgSnO2
- Width 22.5 mm
- Max. permissible humidity (storage/transport) 75 % (on average, 85% infrequently, non-condensing)
- Rated control circuit supply voltage US 24 V AC/DC -15 % / +10 %
- Inrush current 2 A (Δt = 10 ms at Us)
- Operating voltage display 1 x green LED
- Maximum switching frequency 1 Hz
- Maximum inrush current 20 A (Δt 100 ms)
- Output fuse 10 A gL/gG (N/O contact)
- Mounting position vertical or horizontal
- Housing color yellow
- Min. degree of protection of inst. location IP54
- pluggable Yes
- Safety Integrity Level (SIL) 1 (up to SIL 3 depending on the application)
- Degree of pollution 2
- Conformance CE-compliant
- ECLASS 5.0 27371900
- ECLASS 6.0 27371800
- ETIM 3.0 EC001449
- UNSPSC 19.0 39122205
- Ambient temperature (storage/transport) -40 °C ... 70 °C
- Current consumption < 50 mA (with Us/Ix to S12)
- Status display 2 x green LEDs
- Maximum switching voltage 250 V AC/DC (Observe the load curve)
- Inrush current, minimum 10 mA
- Interrupting rating (ohmic load) max. 144 W (24 V DC, τ = 0 ms)
- ECLASS 10.0.1 27371819
- ECLASS 9.0 27371819
- ETIM 6.0 EC001449
- UNSPSC 6.01 30211901
- UNSPSC 21.0 39122205
- Height 99 mm
- Rated control supply current IS typ. 140 mA AC
- Typ. starting time with Us < 65 ms (when controlled via A1)
- Max. permissible overall conductor resistance approx. 22 Ω (Input and start circuits at US)
- Contact type 4 enabling current paths
- Limiting continuous current 6 A (N/O contact, pay attention to the derating)
- Switching capacity min. 50 mW
- Nominal operating mode 100% operating factor
- Mounting type DIN rail mounting
- Housing material PBT
- Conductor cross-section AWG 24 ... 12
- Stripping length 7 mm
- Performance level (PL) c (up to PL e depending on the application)
- Rated surge voltage/insulation Basic insulation 4 kV:between all current paths and housingSafe isolation, reinforced insulation 6 kV:between A1/A2 and 13/14, 23/24, 33/34, 43/44between S11/S12/S33/S34 and 13/14, 23/24, 33/34, 43/44between 51/52 and 13/14, 23/24, 33/34, 43/44
- Shock 15g
- Overvoltage category III
- ECLASS 4.0 40020600
- ECLASS 5.1 27371900
- ECLASS 7.0 27371819
- UNSPSC 11 39121501
- UNSPSC 13.2 39121501
- Minimum switching voltage 5 V AC/DC
- Maximum interrupting rating (inductive load) 42 W (24 V DC, τ = 40 ms)
- Switching capacity (360/h cycles) 4 A (24 V DC)
- Net weight 210.5 g
- Assembly instructions See derating curve
- Connection method Screw connection
- Conductor cross section flexible 0.2 mm² ... 2.5 mm²
- Screw thread M3
- Designation Air clearances and creepage distances between the power circuits
- Safety Integrity Level Claim Limit (SIL CL) 1 (up to SILCL 3 depending on the application)
- Standards/regulations DIN EN 50178/VDE 0160
- Vibration (operation) 10 Hz ... 150 Hz, 2g
- China RoHS Environmentally Friendly Use Period = 50 years
- ECLASS 4.1 40020600
- ETIM 4.0 EC001449
- UNSPSC 7.0901 39121501
- UNSPSC 18.0 39122205
Product condition
ORIGINAL PACKAGING
SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging
This item can ship within 5 days!
1-year warranty
$160.86
Stock:
6
Select Qty:
$160.86
$160.86 each
By purchasing this item, you agree to the Terms & Conditions
Quotebeam is NOT an authorized distributor of Phoenix Contact
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Phoenix Contact Disclaimer:
The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Phoenix Contact Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Phoenix Contact, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Relevant products
Do you have questions?
We’re here for you ✨
We are a proud member of:
