2981428 Phoenix Contact Electrical Safety Devices
Part#:2981428
Manufacturer:Phoenix Contact
Product Lifecycle:Active
In-stock parts: 2
Nov 23, 2024
Safety relay for emergency stop and safety door monitoring up to SIL 3 or Cat. 4, PL e (EN ISO 13849), one- or two-channel operation, automatic or manual activation, 3 N/O contacts, 1 N/C contact, 2 N/O contacts with dropout delay of 0.2 s to 300 s, plug-
About the manufacturer: Phoenix Contact is one of the manufacturers that offers Electrical Safety Devices that you can order at Quotebeam.com. Phoenix Contact manufactures industrial electrical and electronic technology products that offer power, protection, connectivity, and automation for systems and equipment.
Check out the 2981428 Phoenix Contact price in the box on the right side or send a quick quote.
Product Details
- Utilization restriction EMC: class A product, see manufacturer's declaration in the download area
- Depth 114.5 mm
- Maximum altitude ≤ 2000 m (Above sea level)
- Width 45 mm
- Max. permissible humidity (storage/transport) 75 % (on average, 85% infrequently, non-condensing)
- Inrush current 200 mA (at US)
- Typical release time < 20 ms (when controlled via S11/S12 and S21/S22)
- Recovery time < 1 s
- Max. permissible overall conductor resistance approx. 22 Ω (Input and start circuits at US)
- Maximum switching frequency 0.5 Hz
- Maximum switching voltage 250 V AC/DC (Observe the load curve)
- Sq. Total current 55 A2 (observe derating)
- Switching capacity (360/h cycles) 4 A (24 V DC)
- Net weight 430 g
- Min. degree of protection of inst. location IP54
- Stripping length 7 mm
- Max. permissible relative humidity (operation) 75 % (on average, 85% infrequently, non-condensing)
- Power consumption at US typ. 3.72 W
- Typical response time < 600 ms (automatic start)
- Operating voltage display 1 x green LED
- Minimum switching voltage 5 V AC/DC
- Interrupting rating (ohmic load) max. 144 W (24 V DC, τ = 0 ms)
- Output fuse 10 A gL/gG (N/O contact)
- Nominal operating mode 100% operating factor
- Conductor cross section solid 0.2 mm² ... 2.5 mm²
- Safety Integrity Level (SIL) 3 (for delayed contacts SIL 2)
- Degree of pollution 2
- China RoHS Environmentally Friendly Use Period = 50 years
- ECLASS 4.1 40020600
- ECLASS 6.0 27371800
- UNSPSC 6.01 30211901
- UNSPSC 12.01 39121501
- Ambient temperature (operation) -20 °C ... 55 °C (observe derating)
- Ambient temperature (storage/transport) -40 °C ... 70 °C
- Typ. starting time with Us < 600 ms (when controlled via A1)
- Protective circuit Surge protection Suppressor diode
- Filter time 1 ms (at A1 in the event of voltage dips at Us)
- Limiting continuous current 6 A (N/O contact, pay attention to the derating)
- Inrush current, minimum 10 mA
- Relay type Electromechanical relay with force-guided contacts in accordance with IEC/EN 61810-3
- Housing color yellow
- Screw thread M3
- Standards/regulations DIN EN 50178/VDE 0160
- Rated surge voltage/insulation Basic insulation 4 kV:between all current paths and housingSafe isolation, reinforced insulation 6 kV:between 13/14, 23/24, 33/34, and the remaining current pathsbetween 13/14, 23/24, 33/34 among one another
- Conformance CE-compliant
- ECLASS 11.0 27371819
- ECLASS 7.0 27371819
- ETIM 7.0 EC001449
- UNSPSC 7.0901 39121501
- UNSPSC 21.0 39122205
- Height 99 mm
- Rated control circuit supply voltage US 24 V DC -15 % / +10 %
- Current consumption < 40 mA (with Us/Ix to S10)
- Concurrence ∞
- Contact type 5 enabling current paths
- Maximum interrupting rating (inductive load) 42 W (24 V DC, τ = 40 ms, delayed contacts: 48 W)
- Switching capacity min. 50 mW
- Mounting type DIN rail mounting
- Connection method Screw connection
- Conductor cross section flexible 0.2 mm² ... 2.5 mm²
- Stop category 0
- Safety Integrity Level Claim Limit (SIL CL) 3 (for delayed contacts SILCL 2)
- Overvoltage category III
- Vibration (operation) 10 Hz ... 150 Hz, 2g
- ECLASS 5.0 27371900
- ETIM 3.0 EC001449
- UNSPSC 11 39121501
- UNSPSC 19.0 39122205
- Rated control supply current IS typ. 155 mA
- Voltage at input/start and feedback circuit 24 V DC -15 % / +10 %
- Status display 4 x green LEDs
- Contact material AgSnO2
- Maximum inrush current 20 A (Δt 100 ms, undelayed contacts)
- Mechanical service life 10x 106 cycles
- Mounting position any
- Degree of protection IP20
- Housing material PBT
- pluggable Yes
- Conductor cross-section AWG 24 ... 12
- Performance level (PL) e (for delayed contacts PL d)
- Rated insulation voltage 250 V AC
- ECLASS 10.0.1 27371819
- ECLASS 5.1 27371900
- ETIM 2.0 EC001449
- ETIM 4.0 EC001449
- UNSPSC 18.0 39122205
- Designation Air clearances and creepage distances between the power circuits
- Category 4 (Undelayed contacts)
- Shock 15g
- REACh SVHC Lead 7439-92-1
- ECLASS 4.0 40020600
- ECLASS 9.0 27371819
- ETIM 6.0 EC001449
- UNSPSC 13.2 39121501
- UNSPSC 20.0 39122205
Product condition
ORIGINAL PACKAGING
SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging
This item can ship within 5 days!
1-year warranty
$449.36
Stock:
2
Select Qty:
$449.36
$449.36 each
By purchasing this item, you agree to the Terms & Conditions
Quotebeam is NOT an authorized distributor of Phoenix Contact
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Phoenix Contact Disclaimer:
The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Phoenix Contact Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Phoenix Contact, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Relevant products
Do you have questions?
We’re here for you ✨
We are a proud member of:
