2904376 Phoenix Contact AC/DC Power Supplies

2904376 Product Details

• UNSPSC 18.0
  39121004
• Width
  37 mm
• Ambient temperature (start-up type tested)
  -25 °C
• Degree of pollution
  2
• Frequency range (fN)
  50 Hz ... 60 Hz 10 %
• Input fuse
  2.5 A (slow-blow, internal)
• Nominal output current (IN)
  6.25 A (-25 °C ... 55 °C)
• Type of protection
  Transient surge protection
• Connection in series
  No
• Typical response time
  < 1 s
• Power loss nominal load max.
  < 9.7 W
• Net weight
  0.5 kg
• Assembly instructions
  alignable: 0 mm horizontally, 30 mm vertically
• Conductor cross section flexible max.
  2.5 mm²
• Conductor cross section AWG max.
  14
• EMC requirements for noise immunity
  EN 61000-6-1
• Standard – Electronic equipment for use in electrical power installations and their assembly into electrical power installations
  EN 50178/VDE 0160 (PELV)
• Standard - Safe isolation
  DIN VDE 0100-410
• UL approvals
  UL/C-UL listed UL 508
• Electromagnetic compatibility
  Conformance with EMC Directive 2014/30/EU
Discharge in air
8 kV (Test Level 3)
Comments
Criterion A
Surge voltage load (surge)
EN 61000-4-5
Criterion A
Normal operating behavior within the specified limits.
Voltage
10 V (Test Level 3)
Installation distance top/bottom
30 mm / 30 mm
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Depth
125 mm
Ambient temperature (operation)
-25 °C ... 70 °C (> 55 °C Derating: 2.5 %/K)
Climatic class
3K3 (in acc. with EN 60721)
Input voltage range
85 V AC ... 264 V AC
Recommended breaker for input protection
6 A ... 16 A (Characteristics B, C, D, K)
Protective circuit/component
Varistor
Setting range of the output voltage (USet)
24 V DC ... 28 V DC ±1 %
Derating
55 °C ... 70 °C (2.5%/K)
Output power
150 W
Efficiency
typ. 91 % (120 V AC)
Housing material
Polycarbonate
Conductor cross section solid min.
0.2 mm²
Mounting position
horizontal DIN rail NS 35, EN 60715
Screw thread
M3
EMC requirements for noise emission
EN 61000-6-3
Stripping length
8 mm
Mains variation/undervoltage
EN 61000-4-11
CSA
CAN/CSA-C22.2 No. 60950-1-07
Electrostatic discharge
EN 61000-4-2
Electromagnetic HF field
EN 61000-4-3
Frequency range
0.15 MHz ... 80 MHz
Fast transients (burst)
EN 61000-4-4
Output
1 kV (Test Level 2 - symmetrical)
Conducted interference
EN 61000-4-6
ECLASS 10.0.1
27040701
China RoHS
Environmentally Friendly Use Period = 25;
ECLASS 5.0
27049000
ETIM 4.0
EC000599
UNSPSC 19.0
39121004
ETIM 7.0
EC002540
Height
130 mm
Degree of protection
IP20
Nominal input voltage range
100 V AC ... 240 V AC
Current consumption
1.66 A (100 V AC)
Nominal power consumption
164.7 VA
Inrush current
< 50 A (typical)
Connection in parallel
Yes, for redundancy and increased capacity
Feedback voltage resistance
< 35 V DC
Residual ripple
< 40 mVPP (with nominal values)
Insulation voltage input/output
4 kV AC (type test)
MTBF (IEC 61709, SN 29500)
> 868000 h (40 °C)
Conductor cross section solid max.
2.5 mm²
Connection method
Screw connection
Conductor cross section AWG min.
24
Standard - Safety of transformers
EN 61558-2-16
Standard - Electrical safety
IEC 62368-1/VDE 0805 (SELV)
Standard – Safety extra-low voltage
IEC 62368-1 (SELV) und EN 60204-1 (PELV)
Standard – Limitation of mains harmonic currents
EN 61000-3-2
Low Voltage Directive
Conformance with Low Voltage Directive 2014/35/EC
Contact discharge
6 kV (Test Level 3)
Test field strength
10 V/m (Test Level 3)
Input
2 kV (Test Level 3 - symmetrical)
Voltage dips
EN 61000-4-11
Criterion B
Temporary impairment to operational behavior that is corrected by the device itself.
ECLASS 4.0
27040700
ECLASS 5.1
27049000
ECLASS 9.0
27040701
ETIM 6.0
EC002540
UNSPSC 20.0
39121004
UNSPSC 21.0
39121004
Installation distance right/left
0 mm / 0 mm
Inflammability class in acc. with UL 94 (housing / terminal blocks)
V0
Max. permissible relative humidity (operation)
≤ 95 % (at 25 °C, non-condensing)
AC frequency range
50 Hz ... 60 Hz
Mains buffering time
> 20 ms (120 V AC)
Power factor (cos phi)
0.97
Nominal output voltage
24 V DC ±1 %
Control deviation
< 1 % (change in load, static 10 % ... 90 %)
Protection against overvoltage at the output (OVP)
≤ 35 V DC
Maximum power dissipation in no-load condition
< 1.2 W
Protection class
II (in closed control cabinet)
Foot latch material
POM (Polyoxymethylen)
Conductor cross section flexible min.
0.2 mm²
ECLASS 11.0
27040701
ECLASS 4.1
27040700
ECLASS 6.0
27049000
ECLASS 7.0
27049002
UNSPSC 13.2
39121004

Product condition