2903155 Phoenix Contact AC/DC Power Supplies

2903155 Product Details

• Height
  130 mm
• Inflammability class in acc. with UL 94 (housing / terminal blocks)
  V0
• Max. permissible relative humidity (operation)
  ≤ 95 % (at 25 °C, non-condensing)
• Nominal input voltage range
  3x 400 V AC ... 500 V AC
• Discharge current to PE
  < 3.5 mA
• Mains buffering time
  typ. 10 ms (400 V AC)
• Depth
  160 mm
• Degree of protection
  IP20
• Ambient temperature (start-up type tested)
  -40 °C
• Climatic class
  3K3 (in acc. with EN 60721)
• Input voltage range
  3x 400 V AC ... 500 V AC -20 % ....+15 %
• Current consumption
  3x 1.2 A (400 V AC)
• Recommended breaker for input protection
  6 A ... 16 A (Characteristics B, C, D, K)
• Nominal output current (IN)
  20 A
• Connection in series
  yes
• Output power
  480 W
• Power loss nominal load max.
  < 38 W (480 V AC)
• Assembly instructions
  alignable: horizontally 0 mm (≤ 40 °C) 10 mm (≤ 70 °C), vertically 50 mm
• Conductor cross section solid min.
  0.2 mm²
• Conductor cross section flexible max.
  1.5 mm²
Standard - Electrical safety
IEC 60950-1/VDE 0805 (SELV)
Shipbuilding approval
GL applied for
Noise emission
EN 55016
Electromagnetic HF field
EN 61000-4-3
Fast transients (burst)
EN 61000-4-4
Output
1 kV (Test Level 2 - symmetrical)
Number of periods
1 period
Additional text
Test Level 2
China RoHS
Environmentally Friendly Use Period = 25;
Conductor cross section AWG min.
24
EMC requirements for noise emission
EN 61000-6-3
Rail applications
EN 50121-4
Electromagnetic compatibility
Conformance with EMC Directive 2014/30/EU
Low Voltage Directive
Conformance with Low Voltage Directive 2014/35/EC
Input
3 kV (Test Level 3 - symmetrical)
Voltage
230 V AC
Criterion A
Normal operating behavior within the specified limits.
REACh SVHC
Lead 7439-92-1
ECLASS 4.0
27040700
ECLASS 4.1
27040700
UNSPSC 21.0
39121004
Installation distance top/bottom
50 mm / 50 mm
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Installation height
≤ 5000 m (> 2000 m, Derating: 10 %/1000 m)
Inrush current
≤ 22 A (typical)
Power factor (cos phi)
0.63
Nominal output voltage
24 V DC ±1 %
Connection in parallel
Yes, for redundancy and increased capacity
Residual ripple
≤ 20 mVPP
MTBF (IEC 61709, SN 29500)
> 1800000 h (25 °C)
Protection class
I (in closed control cabinet)
Connection method
Push-in connection
EMC requirements for noise immunity
EN 61000-6-1
Standard – Safety extra-low voltage
IEC 60950-1 (SELV) and EN 60204-1 (PELV)
Conducted noise emission
EN 55016
Electrostatic discharge
EN 61000-4-2
Frequency range
0.15 MHz ... 80 MHz
Conducted interference
EN 61000-4-6
Voltage dip
0 %
ECLASS 11.0
27040701
ECLASS 6.0
27049000
ECLASS 9.0
27040701
UNSPSC 13.2
39121004
Width
65 mm
Installation distance right/left
0 mm / 0 mm
Ambient temperature (operation)
-25 °C ... 70 °C (> 60 °C Derating: 2.5 %/K)
Degree of pollution
2
AC frequency range
50 Hz ... 60 Hz
Nominal power consumption
822.2 VA
Input fuse
3.15 A (internal (device protection), slow-blow)
Protective circuit/component
Varistor
Dynamic Boost (IDyn.Boost)
30 A (5 s)
Control deviation
< 1 % (change in load, static 10 % ... 90 %)
Maximum power dissipation in no-load condition
< 1.2 W (400 V AC)
Net weight
1.5 kg
Insulation voltage input/output
3 kV AC (type test)
Conductor cross section flexible min.
0.2 mm²
Conductor cross section AWG max.
16
Standard - Safety of transformers
EN 61558-2-16 (air clearances and creepage distances only)
Standard - Safe isolation
DIN VDE 0100-410
Discharge in air
8 kV (Test Level 4)
Comments
Criterion A
Signal
1 kV (Test Level 1 - asymmetrical)
Voltage dips
EN 61000-4-11
Criterion B
Temporary impairment to operational behavior that is corrected by the device itself.
ECLASS 5.1
27049000
ETIM 4.0
EC002540
ETIM 7.0
EC002540
Type of protection
Transient surge protection
Setting range of the output voltage (USet)
24 V DC ... 28 V DC (> 24 V DC, constant capacity restricted)
Derating
> 60 °C ... 70 °C (2.5%/K)
Protection against overvoltage at the output (OVP)
≤ 30 V DC
Typical response time
< 1 s
Efficiency
> 93 % (400 V AC)
Mounting position
horizontal DIN rail NS 35, EN 60715
Conductor cross section solid max.
1.5 mm²
Stripping length
8 mm
Standard – Electronic equipment for use in electrical power installations and their assembly into electrical power installations
EN 50178/VDE 0160 (PELV)
Standard – Limitation of mains harmonic currents
EN 61000-3-2
UL approvals
UL Listed UL 508
Contact discharge
6 kV (Test Level 4)
Test field strength
10 V/m (Test Level 3)
Surge voltage load (surge)
EN 61000-4-5
Frequency
50 Hz
ECLASS 10.0.1
27040701
ECLASS 5.0
27049000
ETIM 6.0
EC002540
UNSPSC 18.0
39121004
UNSPSC 20.0
39121004
ECLASS 7.0
27049002
UNSPSC 19.0
39121004

Product condition