2903002 Phoenix Contact AC/DC Power Supplies

2903002 Product Details

• Height
  90 mm
• Degree of protection
  IP20
• Ambient temperature (operation)
  -25 °C ... 70 °C (> 55 °C Derating: 2.5 %/K)
• Max. permissible relative humidity (operation)
  ≤ 95 % (at 25 °C, non-condensing)
• Nominal power consumption
  206.3 VA
• Mains buffering time
  > 20 ms (120 V AC)
• Protective circuit/component
  Varistor
• Feedback voltage resistance
  < 25 V DC
• Output power
  100 W
• Depth
  84 mm
• Inflammability class in acc. with UL 94 (housing / terminal blocks)
  V0
• Climatic class
  3K3 (in acc. with EN 60721)
• Input voltage range
  85 V AC ... 264 V AC
• Inrush current
  < 30 A (typical)
• Type of protection
  Transient surge protection
• Width
  55 mm
• Installation distance top/bottom
  30 mm / 30 mm
• Ambient temperature (storage/transport)
  -40 °C ... 85 °C
• Nominal input voltage range
  100 V AC ... 240 V AC
• Frequency range (fN)
  50 Hz ... 60 Hz 10 %
Input fuse
4 A (slow-blow, internal)
Power factor (cos phi)
0.54
Connection in parallel
Yes, for redundancy and increased capacity
Residual ripple
< 75 mVPP (with nominal values)
Control deviation
< 1 % (change in load, static 10 % ... 90 %)
Efficiency
typ. 89 % (120 V AC)
Standard – Safety extra-low voltage
IEC 62368-1 (SELV) und EN 60204-1 (PELV)
Discharge in air
8 kV (Test Level 3)
Comments
Criterion A
Surge voltage load (surge)
EN 61000-4-5
Voltage dips
EN 61000-4-11
ECLASS 10.0.1
27040701
ETIM 6.0
EC002540
UNSPSC 11
39121004
UNSPSC 19.0
39121004
Installation distance right/left
0 mm / 0 mm
Degree of pollution
2
Current consumption
2.19 A (100 V AC)
Recommended breaker for input protection
6 A ... 16 A (Characteristics B, C, D, K)
Nominal output current (IN)
6.67 A (-25 °C ... 55 °C)
Nominal output voltage
15 V DC ±1 %
Connection in series
yes
Net weight
0.34 kg
Protection class
II (in closed control cabinet)
Assembly instructions
alignable: 0 mm horizontally, 30 mm vertically
Conductor cross section AWG min.
24
Screw thread
M3
Standard - Safety of transformers
EN 61558-2-16
Standard – Limitation of mains harmonic currents
EN 61000-3-2
Electromagnetic compatibility
Conformance with EMC Directive 2014/30/EU
Contact discharge
6 kV (Test Level 3)
Input
2 kV (Test Level 3 - symmetrical)
Criterion A
Normal operating behavior within the specified limits.
ECLASS 4.0
27040700
ECLASS 5.1
27049000
ETIM 3.0
EC001039
UNSPSC 12.01
39121004
UNSPSC 21.0
39121004
MTBF (IEC 61709, SN 29500)
> 727000 h (40 °C)
Foot latch material
POM (Polyoxymethylen)
Mounting position
horizontal DIN rail NS 35, EN 60715
Conductor cross section flexible max.
2.5 mm²
EMC requirements for noise immunity
EN 61000-6-1
Standard – Electronic equipment for use in electrical power installations and their assembly into electrical power installations
EN 50178/VDE 0160 (PELV)
CSA
CAN/CSA-C22.2 No. 60950-1-07
Fast transients (burst)
EN 61000-4-4
Electromagnetic HF field
EN 61000-4-3
Output
1 kV (Test Level 2 - symmetrical)
China RoHS
Environmentally Friendly Use Period = 25;
ECLASS 6.0
27049000
ECLASS 7.0
27049002
UNSPSC 7.0901
39121004
UNSPSC 18.0
39121004
ECLASS 5.0
27049000
ECLASS 9.0
27040701
ETIM 7.0
EC002540
UNSPSC 20.0
39121004
Derating
55 °C ... 70 °C (2.5%/K)
Typical response time
< 1 s
Housing material
Polycarbonate
EMC requirements for noise emission
EN 61000-6-3
Standard - Safe isolation
DIN VDE 0100-410
Criterion B
Temporary impairment to operational behavior that is corrected by the device itself.
ECLASS 4.1
27040700
ETIM 4.0
EC000599
Power loss nominal load max.
< 12 W
Conductor cross section solid min.
0.2 mm²
Stripping length
8 mm
Low Voltage Directive
Conformance with Low Voltage Directive 2014/35/EC
Test field strength
10 V/m
Voltage
10 V (Test Level 3)
Conducted interference
EN 61000-4-6
UNSPSC 6.01
30211502
Insulation voltage input/output
4 kV AC (type test)
Connection method
Screw connection
Conductor cross section flexible min.
0.2 mm²
Standard - Electrical safety
IEC 62368-1/VDE 0805 (SELV)
Frequency range
10 kHz ... 80 MHz
Protection against overvoltage at the output (OVP)
≤ 25 V DC
Maximum power dissipation in no-load condition
< 0.4 W
Conductor cross section solid max.
2.5 mm²
Conductor cross section AWG max.
14
Mains variation/undervoltage
EN 61000-4-11
UL approvals
UL/C-UL listed UL 508
Electrostatic discharge
EN 61000-4-2
ECLASS 11.0
27040701
UNSPSC 13.2
39121004

Product condition