2902879 Phoenix Contact Redundancy Modules

2902879 Product Details

• Installation height
  2000 m
• Height
  130 mm
• Depth with alternative assembly
  69 mm
• Installation distance top/bottom
  50 mm / 50 mm
• Ambient temperature (storage/transport)
  -40 °C ... 85 °C
• ECLASS 6.0
  27371000
• ETIM 4.0
  EC000599
• UNSPSC 12.01
  39121004
• Depth
  125 mm
• Installation distance right/left
  5 mm / 5 mm
• Degree of protection
  IP20
• Climatic class
  3K3 (in acc. with EN 60721)
• Degree of pollution
  2
• Nominal output current (IN)
  80 A (Increasing power)
• Power loss nominal load max.
  16 W (IOUT = 80 A)
• Protection class
  III
• Conductor cross section flexible max.
  4 mm²
• Conductor cross section AWG max.
  10
• Width
  66 mm
• Height with alternative assembly
  130 mm
Ambient temperature (start-up type tested)
-40 °C
Input voltage range
18 V DC ... 28 V DC (SELV)
Nominal input current
2x 40 A (-25 °C ... 60 °C)
Derating
60 °C ... 70 °C (2.5%/K)
Mounting position
horizontal DIN rail NS 35, EN 60715
Efficiency
> 98 %
Conductor cross section solid min.
0.2 mm²
Screw thread
M3
EMC requirements for noise immunity
EN 61000-6-1
Electrostatic discharge
EN 61000-4-2
Contact discharge
8 kV (Test Level 4)
Discharge in air
15 kV (Test Level 4)
Comments
Criterion A
I/O/S
asymmetrical
ECLASS 4.1
27250300
ECLASS 4.0
27250300
ECLASS 7.0
27371010
UNSPSC 11
39121004
UNSPSC 21.0
32151504
Width with alternative assembly
122 mm
Ambient temperature (operation)
-25 °C ... 70 °C (> 60 °C Derating: 2.5 %/K)
Max. permissible relative humidity (operation)
≤ 95 % (at 25 °C, non-condensing)
Nominal output voltage
0.2 V (< DC input)
Connection in series
No
Net weight
0.9 kg
Assembly instructions
alignable: PN ≥50%, 5 mm horizontally, 15 mm next to active components, 50 mm verticallyalignable: PN <50%, 0 mm horizontally, 40 mm vertically top, 20 mm vertically bottom
Conductor cross section solid max.
6 mm²
Stripping length
10 mm
Standard – Electronic equipment for use in electrical power installations and their assembly into electrical power installations
EN 50178/VDE 0160 (PELV)
Electromagnetic compatibility
Conformance with EMC Directive 2014/30/EU
UL approvals
UL/C-UL listed UL 508
Fast transients (burst)
EN 61000-4-4
Conducted interference
EN 61000-4-6
Voltage
10 V (Test Level 3)
China RoHS
Environmentally Friendly Use Period = 25;
ECLASS 5.1
27371000
ECLASS 9.0
27371010
ETIM 7.0
EC002540
UNSPSC 6.01
30211502
UNSPSC 19.0
32151504
UNSPSC 20.0
32151504
Nominal input voltage range
24 V DC
Maximum input current
2x 45 A (-25°C ... 40°C)
Protection against overvoltage at the output (OVP)
≤ 32 V DC
Connection method
Screw connection
Conductor cross section flexible min.
0.2 mm²
Conductor cross section AWG min.
16
EMC requirements for noise emission
EN 61000-6-3
Low Voltage Directive
Conformance with Low Voltage Directive 2014/35/EC
Electromagnetic HF field
EN 61000-4-3
Output
1 kV (Test Level 2 - symmetrical)
Surge voltage load (surge)
EN 61000-4-5
Signal
1 kV (Test Level 2 - asymmetrical)
REACh SVHC
Lead 7439-92-1
ECLASS 10.0.1
27371010
ETIM 3.0
EC000599
UNSPSC 7.0901
39121004
UNSPSC 18.0
32151504
Standard – Safety extra-low voltage
IEC 60950-1 (SELV) and EN 60204-1 (PELV)
Standard - Electrical safety
EN 60950-1/VDE 0805 (SELV)
Frequency range
0.15 MHz ... 80 MHz
Test field strength
10 V/m (Test Level 3)
Input
1 kV (Test Level 2 - symmetrical)
Criterion B
Temporary impairment to operational behavior that is corrected by the device itself.
Criterion A
Normal operating behavior within the specified limits.
ECLASS 11.0
27371010
ECLASS 5.0
27371000
ETIM 6.0
EC002540
UNSPSC 13.2
39121004

Product condition