2902065 Phoenix Contact Electrical Measuring & Monitoring Instruments
Part#:2902065
Manufacturer:Phoenix Contact
Product Lifecycle:Active
Get a quick Quote!
About the product: Constant voltage/current source with plug-in connection technology, input voltage: 9.6 V DC ... 30 V DC. Output voltage: 1.25 V DC ...10 V DC or output current: 2.5 mA ... 20 mA can be set. Configurable via DIP switch. Push-in connection technology.
About the manufacturer: Phoenix Contact is one of the manufacturers that offers Electrical Measuring & Monitoring Instruments that you can order at Quotebeam.com. Phoenix Contact manufactures industrial electrical and electronic technology products that offer power, protection, connectivity, and automation for systems and equipment.
Check out the 2902065 Phoenix Contact price in the box on the right side or send a quick quote.
2902065 Product Details
- Height 109.81 mm
- Transmitter supply voltage 10 V
- Output voltage with wire break 13.5 V
- Stripping length 10 mm
- Maximum temperature coefficient < 0.01 %/K
- Maximum transmission error ≤ 0.1 % (of final value)
- Noise emission EN 61000-6-4
- Electromagnetic compatibility Conformance with EMC directive
- Fire protection for rail vehicles (DIN EN 45545-2) R24 HL 1 - HL 2
- DNV GL-Vibration A
- ECLASS 4.0 27210100
- ECLASS 6.0 27049000
- ETIM 7.0 EC002540
- Width 6.2 mm
- Degree of protection IP20 (not assessed by UL)
- Short-circuit current > 32 mA
- Typical current consumption < 42 mA (24 V DC)
- Conductor cross section solid 0.2 mm² ... 2.5 mm² (with ferrule)
- Overvoltage category II
- Test voltage, input/output/supply 3 kV (50 Hz, 1 min.)
- Assembly instructions The T connector can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail according to EN 60715.
- Conformance CE-compliant
- DNV GL-Humidity B
- Ambient temperature (operation) -40 °C ... 70 °C
- Permissible humidity (operation) 5 % ... 95 % (non-condensing)
- Max. output current 20 mA
- Configurable/programmable Yes
- Load/output load current output ≤ 600 Ω (20 mA)
- Power consumption < 1.1 W (9.6 V DC)
- Conductor cross section flexible 0.14 mm² ... 2.5 mm²
- Color gray
- Fire protection for rail vehicles (DIN EN 45545-2) R23 HL 1 - HL 2
- Designation GB Standard
- DNV GL-Temperature B
- China RoHS Environmentally Friendly Use Period = 50 years
- ECLASS 4.1 27210100
- UNSPSC 6.01 30211506
- ETIM 6.0 EC002540
- UNSPSC 11 39121008
- UNSPSC 19.0 39121004
- Depth 119.2 mm
- Ambient temperature (storage/transport) -40 °C ... 85 °C
- Ripple < 20 mVPP (at 600 Ω)
- Conductor cross section AWG 24 ... 12 (flexible)
- REACh SVHC Lead 7439-92-1
- ECLASS 5.0 27210100
- ECLASS 5.1 27210100
- UNSPSC 7.0901 39121008
- UNSPSC 13.2 39121004
- UNSPSC 21.0 39121004
- Noise immunity EN 61000-6-2 When being exposed to interference, there may be minimal deviations.
- Degree of pollution 2
- Housing material PBT
- Fire protection for rail vehicles (DIN EN 45545-2) R22 HL 1 - HL 2
- Standards/regulations GB 3836.1
- ECLASS 9.0 27040701
- Utilization restriction EMC: class A product, see manufacturer's declaration in the download area
- Max. output voltage 10 V DC
- Supply voltage range 9.6 V DC ... 30 V DC (The DIN rail bus connector (ME 6,2 TBUS-2 1,5/5-ST-3,81 GN, Order No. 2869728) can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail according to EN 60715))
- Connection method Push-in connection
- Rated insulation voltage 300 V (effective)
- Mounting position any
- ATEX II 3 G Ex nA IIC T4 Gc X
- DNV GL-Enclosure Required protection according to the Rules shall be provided upon installation on board
- ECLASS 10.0.1 27040701
- ECLASS 7.0 27049002
- ETIM 4.0 EC002540
- UNSPSC 12.01 39121008
- UNSPSC 20.0 39121004
- Voltage input signal 9.6 V DC ... 30 V DC
- Output current ≤ 30 mA
- Electrical isolation Reinforced insulation in accordance with IEC 61010-1
- UL, USA/Canada UL 508 Listed
- DNV GL-EMC A
- ECLASS 11.0 27040701
- UNSPSC 18.0 39121004
Product condition
New Factory Sealed
New Factory Sealed - New condition, never used surplus in original packaging with original factory seal.
1-year warranty
Get a quick Quote!
Request a quote, and we will send you price and availability within minutes.
2902065
Select Qty:
Average response time: 11 minutes
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Relevant products
Do you have questions?
We’re here for you ✨