2902064 Phoenix Contact Electrical Measuring & Monitoring Instruments

2902064 Product Details

• Conductor cross section AWG
  24 ... 12 (flexible)
• Electrical isolation
  Reinforced insulation in accordance with IEC 61010-1
• Test voltage, input/output/supply
  3 kV (50 Hz, 1 min.)
• Electromagnetic compatibility
  Conformance with EMC directive
• Designation
  GB Standard
• DNV GL-Temperature
  B
• DNV GL-Enclosure
  Required protection according to the Rules shall be provided upon installation on board
• ECLASS 5.1
  27210100
• Torque
  0.5 Nm ... 0.6 Nm
• Screw thread
  M3
• Overvoltage category
  II
• Noise emission
  EN 61000-6-4
• Fire protection for rail vehicles (DIN EN 45545-2) R23
  HL 1 - HL 2
• DNV GL-EMC
  A
• ECLASS 11.0
  27040701
• ECLASS 5.0
  27210100
• ETIM 6.0
  EC002540
• Conductor cross section flexible
  0.14 mm² ... 2.5 mm²
• Rated insulation voltage
  300 V (effective)
• Mounting position
  any
Standards/regulations
GB 3836.1
REACh SVHC
Lead 7439-92-1
ECLASS 4.0
27210100
ECLASS 7.0
27049002
UNSPSC 6.01
30211506
UNSPSC 11
39121008
Maximum transmission error
≤ 0.1 % (of final value)
Degree of pollution
2
Housing material
PBT
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 2
DNV GL-Vibration
A
ECLASS 4.1
27210100
ECLASS 10.0.1
27040701
ETIM 7.0
EC002540
Maximum temperature coefficient
< 0.01 %/K
Color
gray
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 2
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 6.0
27049000
ECLASS 9.0
27040701
UNSPSC 7.0901
39121008
UNSPSC 13.2
39121004
Depth
119.2 mm
Max. output voltage
10 V DC
Voltage input signal
9.6 V DC ... 30 V DC
Load/output load current output
≤ 600 Ω (20 mA)
DNV GL-Humidity
B
UNSPSC 18.0
39121004
UNSPSC 21.0
39121004
Height
109.81 mm
Maximum altitude
≤ 2000 m
Noise immunity
EN 61000-6-2 When being exposed to interference, there may be minimal deviations.
Output voltage with wire break
13.5 V
Connection method
Screw connection
Stripping length
10 mm
UNSPSC 12.01
39121008
Utilization restriction
EMC: class A product, see manufacturer's declaration in the download area
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Max. output current
20 mA
Short-circuit current
> 32 mA
Typical current consumption
< 42 mA (24 V DC)
Supply voltage range
9.6 V DC ... 30 V DC (The DIN rail bus connector (ME 6,2 TBUS-2 1,5/5-ST-3,81 GN, Order No. 2869728) can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail according to EN 60715))
Assembly instructions
The T connector can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail according to EN 60715.
UNSPSC 19.0
39121004
Ambient temperature (operation)
-40 °C ... 70 °C
Degree of protection
IP20 (not assessed by UL)
Output current
≤ 30 mA
Power consumption
< 1.1 W (9.6 V DC)
ETIM 4.0
EC002540
Width
6.2 mm
Permissible humidity (operation)
5 % ... 95 % (non-condensing)
Configurable/programmable
Yes
Ripple
< 20 mVPP (at 600 Ω)
Conductor cross section solid
0.2 mm² ... 1.5 mm² (with ferrule)
UNSPSC 20.0
39121004

Product condition