2902059 Phoenix Contact Electrical Measuring & Monitoring Instruments

2902059 Product Details

• Depth
  119.2 mm
• Ambient temperature (storage/transport)
  -40 °C ... 85 °C
• Available input sources
  NAMUR initiators
• Voltage output signal
  0 V ... 10 V (via DIP switch)
• Max. output current
  24.6 mA
• Ripple
  < 20 mVPP (at 600 Ω)
• Step response (0–99%)
  < 35 ms (f > 500 Hz)
• Supply voltage range
  9.6 V DC ... 30 V DC (The DIN rail bus connector (ME 6,2 TBUS-2 1,5/5-ST-3,81 GN, Order No. 2869728) can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail according to EN 60715))
• Conductor cross section flexible
  0.14 mm² ... 2.5 mm²
• Conductor cross section AWG
  24 ... 12 (flexible)
• Overvoltage category
  II
• Rated insulation voltage
  300 V (effective)
• Color
  gray
• Typical deviation from the measuring range final value
  2.8 %
• DNV GL-EMC
  A
• DNV GL-Enclosure
  Required protection according to the Rules shall be provided upon installation on board
• Humidity
  B
• REACh SVHC
  Lead 7439-92-1
• Width
  6.2 mm
• Ambient temperature (operation)
  -40 °C ... 70 °C
Degree of protection
IP20 (not assessed by UL)
Number of outputs
1
Max. output voltage
approx. 12.3 V
Output name
Switching output
Contact type
1 N/O contact
Min. switching current
100 µA
Connection method
Push-in connection
No. of channels
1
Maximum transmission error
0.1 % (Frequency)
Electrical isolation
Reinforced insulation in accordance with IEC 61010-1
Test voltage, input/output/supply
3 kV (50 Hz, 1 min.)
Assembly instructions
The T connector can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail according to EN 60715.
ATEX
 II 3 G Ex nA IIC T4 Gc X
UL, USA/Canada
UL 508 Listed
DNV GL-Vibration
A
Temperature
B
Enclosure
Required protection according to the Rules shall be provided upon installation on board
ECLASS 11.0
27210128
ECLASS 9.0
27210128
Utilization restriction
EMC: class A product, see manufacturer's declaration in the download area
Noise immunity
EN 61000-6-2 When being exposed to interference, there may be minimal deviations.
Configurable/programmable
Yes
Load/output load current output
≤ 600 Ω (at 20 mA)
Maximum switching voltage
30 V DC
Nominal supply voltage
24 V DC
Typical current consumption
32 mA (24 V DC)
Conductor cross section solid
0.2 mm² ... 2.5 mm² (with ferrule)
Temperature coefficient, typical
0.01 %/K
Degree of pollution
2
Electromagnetic compatibility
Conformance with EMC directive
Housing material
PBT
Standards/regulations
EN 61000-4-6
Conformance
CE-compliant
DNV GL-Humidity
B
Identification
UL 508 Listed
EMC
A
China RoHS
Environmentally Friendly Use Period = 50 years
ETIM 7.0
EC002918
Height
109.81 mm
Permissible humidity (operation)
5 % ... 95 % (non-condensing)
Frequency input
Frequency input
Frequency measuring range
0.002 Hz ... 200 kHz
Current output signal
0 mA ... 20 mA (via DIP switch)
Load/output load voltage output
≥ 10 kΩ
Minimum switching voltage
1 V
Max. switching current
100 mA (30 V)
Power consumption
≤ 1 W (at IOUT = 20 mA, 9.6 V DC, 600 Ω load)
Stripping length
10 mm
Maximum temperature coefficient
0.01 %/K
Status display
Yellow LED (switching output)
Noise emission
EN 61000-6-4
Mounting position
any
Designation
Shipbuilding approval
DNV GL-Temperature
B
Certificate
DNV GL TAA000021E
Vibration
A
ECLASS 10.0.1
27210128
ETIM 6.0
EC002918

Product condition