2902058 Phoenix Contact Electrical Measuring & Monitoring Instruments

Product Details

• Depth
  119.2 mm
• Configurable/programmable
  Yes
• Frequency measuring range
  0.002 Hz ... 200 kHz
• Permissible humidity (operation)
  5 % ... 95 % (non-condensing)
• Available input sources
  NAMUR initiators
• Current output signal
  0 mA ... 20 mA (via DIP switch)
• Max. output current
  24.6 mA
• Step response (0–99%)
  < 35 ms (f > 500 Hz)
• Height
  109.81 mm
• Ambient temperature (operation)
  -40 °C ... 70 °C
• Noise immunity
  EN 61000-6-2 When being exposed to interference, there may be minimal deviations.
• Max. output voltage
  approx. 12.3 V
• Utilization restriction
  EMC: class A product, see manufacturer's declaration in the download area
• Degree of protection
  IP20 (not assessed by UL)
• Frequency input
  Frequency input
• Load/output load current output
  ≤ 600 Ω (at 20 mA)
• Contact type
  1 N/O contact
• REACh SVHC
  Lead 7439-92-1
• Width
  6.2 mm
• Ambient temperature (storage/transport)
  -40 °C ... 85 °C
Number of outputs
1
Voltage output signal
0 V ... 10 V (via DIP switch)
Ripple
< 20 mVPP (at 600 Ω)
Nominal supply voltage
24 V DC
Load/output load voltage output
≥ 10 kΩ
Maximum switching voltage
30 V DC
Supply voltage range
9.6 V DC ... 30 V DC (The DIN rail bus connector (ME 6,2 TBUS-2 1,5/5-ST-3,81 GN, Order No. 2869728) can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail according to EN 60715))
Conductor cross section flexible
0.14 mm² ... 2.5 mm²
Maximum temperature coefficient
0.01 %/K
Electrical isolation
Reinforced insulation in accordance with IEC 61010-1
Standards/regulations
EN 61000-4-6
Maximum transmission error
0.1 % (Frequency)
Degree of pollution
2
Electromagnetic compatibility
Conformance with EMC directive
Mounting position
any
Color
gray
Typical deviation from the measuring range final value
2.8 %
UL, USA/Canada
UL 508 Listed
EMC
A
Min. switching current
100 µA
Conductor cross section solid
0.2 mm² ... 2.5 mm² (with ferrule)
Overvoltage category
II
Assembly instructions
The T connector can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail according to EN 60715.
Designation
Shipbuilding approval
DNV GL-Humidity
B
Output name
Switching output
Typical current consumption
32 mA (24 V DC)
Connection method
Push-in connection
Noise emission
EN 61000-6-4
DNV GL-Vibration
A
Identification
UL 508 Listed
Conductor cross section AWG
24 ... 12 (flexible)
Test voltage, input/output/supply
3 kV (50 Hz, 1 min.)
Max. switching current
100 mA (30 V)
Power consumption
≤ 1 W (at IOUT = 20 mA, 9.6 V DC, 600 Ω load)
No. of channels
1
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 2
Conformance
CE-compliant
Stripping length
10 mm
Temperature coefficient, typical
0.01 %/K
Housing material
PBT
ATEX
 II 3 G Ex nA IIC T4 Gc X
Temperature
B
ECLASS 5.1
27210100
Minimum switching voltage
1 V
Status display
Yellow LED (switching output)
Rated insulation voltage
300 V (effective)
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 2
DNV GL-Temperature
B
UNSPSC 21.0
39121007
DNV GL-Enclosure
Required protection according to the Rules shall be provided upon installation on board
ECLASS 4.0
27210100
ECLASS 6.0
27210100
ECLASS 9.0
27210128
ETIM 6.0
EC002918
UNSPSC 11
39121008
ECLASS 4.1
27210100
ETIM 4.0
EC002653
UNSPSC 12.01
39121008
Certificate
DNV GL TAA000021E
ECLASS 10.0.1
27210128
ECLASS 7.0
27210120
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 2
Vibration
A
DNV GL-EMC
A
Humidity
B
ECLASS 11.0
27210128
UNSPSC 7.0901
39121008
ECLASS 5.0
27210100
ETIM 7.0
EC002918
UNSPSC 6.01
30211506
UNSPSC 20.0
39121007
Enclosure
Required protection according to the Rules shall be provided upon installation on board
UNSPSC 18.0
39121007
China RoHS
Environmentally Friendly Use Period = 50 years
UNSPSC 19.0
39121007
UNSPSC 13.2
39121008