2902057 Phoenix Contact Electrical Measuring & Monitoring Instruments
Part#:2902057
Manufacturer:Phoenix Contact
Product Lifecycle:Active
Checking verified in-stock parts...
About the product: Universally configurable frequency transducer for converting frequency and PWM signals into standard signals. Sensor voltages greater than 8.2 V DC are possible in combination with MINI MCR-2-SPS 1033202. Screw connection technology, order configuration.
About the manufacturer: Phoenix Contact develops and manufactures industrial electrical and electronic technology products that power, protect, connect and automate systems and equipment.
Check out the 2902057 Phoenix Contact price in the box on the right side or send a quick quote.
2902057 Product Details
- Width 6.2 mm
- Ambient temperature (operation) -40 °C ... 70 °C
- Noise immunity EN 61000-6-2 When being exposed to interference, there may be minimal deviations.
- Available input sources NAMUR initiators
- Number of outputs 1
- Voltage output signal 0 V ... 10 V (via DIP switch)
- Max. output current 24.6 mA
- Ripple < 20 mVPP (at 600 Ω)
- Step response (0–99%) < 35 ms (f > 500 Hz)
- Utilization restriction EMC: class A product, see manufacturer's declaration in the download area
- Depth 119.2 mm
- Ambient temperature (storage/transport) -40 °C ... 85 °C
- Degree of protection IP20 (not assessed by UL)
- Configurable/programmable Yes
- Max. output voltage approx. 12.3 V
- Load/output load current output ≤ 600 Ω (at 20 mA)
- Maximum switching voltage 30 V DC
- Min. switching current 100 µA
- Max. switching current 100 mA (30 V)
- Supply voltage range 9.6 V DC ... 30 V DC (The DIN rail bus connector (ME 6,2 TBUS-2 1,5/5-ST-3,81 GN, Order No. 2869728) can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail according to EN 60715))
- Power consumption ≤ 1 W (at IOUT = 20 mA, 9.6 V DC, 600 Ω load)
- Stripping length 10 mm
- Conductor cross section flexible 0.14 mm² ... 2.5 mm²
- Torque 0.5 Nm ... 0.6 Nm
- No. of channels 1
- Maximum transmission error 0.1 % (Frequency)
- Electrical isolation Reinforced insulation in accordance with IEC 61010-1
- Status display Yellow LED (switching output)
- Degree of pollution 2
- Electromagnetic compatibility Conformance with EMC directive
- Housing material PBT
- Mounting position any
- Assembly instructions The T connector can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail according to EN 60715.
- Conformance CE-compliant
- ATEX II 3 G Ex nA IIC T4 Gc X
- UL, USA/Canada UL 508 Listed
- DNV GL-EMC A
- DNV GL-Enclosure Required protection according to the Rules shall be provided upon installation on board
- Identification UL 508 Listed
- Vibration A
- EMC A
- Enclosure Required protection according to the Rules shall be provided upon installation on board
- ECLASS 11.0 27210128
- ECLASS 9.0 27210128
- ETIM 6.0 EC002918
- Height 109.81 mm
- Permissible humidity (operation) 5 % ... 95 % (non-condensing)
- Frequency input Frequency input
- Frequency measuring range 0.002 Hz ... 200 kHz
- Current output signal 0 mA ... 20 mA (via DIP switch)
- Load/output load voltage output ≥ 10 kΩ
- Output name Switching output
- Contact type 1 N/O contact
- Minimum switching voltage 1 V
- Nominal supply voltage 24 V DC
- Typical current consumption 32 mA (24 V DC)
- Connection method Screw connection
- Screw thread M3
- Conductor cross section solid 0.2 mm² ... 1.5 mm² (with ferrule)
- Conductor cross section AWG 24 ... 12 (flexible)
- Maximum temperature coefficient 0.01 %/K
- Temperature coefficient, typical 0.01 %/K
- Overvoltage category II
- Rated insulation voltage 300 V (effective)
- Test voltage, input/output/supply 3 kV (50 Hz, 1 min.)
- Noise emission EN 61000-6-4
- Color gray
- Designation Shipbuilding approval
- Standards/regulations EN 61000-4-6
- Typical deviation from the measuring range final value 2.8 %
- DNV GL-Temperature B
- DNV GL-Humidity B
- DNV GL-Vibration A
- Certificate DNV GL TAA000021E
- Temperature B
- Humidity B
- REACh SVHC Lead 7439-92-1
- China RoHS Environmentally Friendly Use Period = 50 years
- ECLASS 10.0.1 27210128
- ETIM 7.0 EC002918
Product condition
New Factory Sealed
New Factory Sealed - New condition, never used surplus in original packaging with original factory seal.
Shipping and Delivery Worldwide
calculate cost and time at Checkout
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Relevant products
Do you have questions?
We’re here for you ✨