2902056 Phoenix Contact Electrical Measuring & Monitoring Instruments

2902056 Product Details

• Width
  6.2 mm
• Permissible humidity (operation)
  5 % ... 95 % (non-condensing)
• Depth
  119.2 mm
• Degree of protection
  IP20 (not assessed by UL)
• Available input sources
  NAMUR initiators
• Max. output current
  24.6 mA
• Contact type
  1 N/O contact
• Nominal supply voltage
  24 V DC
• Stripping length
  10 mm
• Conductor cross section flexible
  0.14 mm² ... 2.5 mm²
• Maximum temperature coefficient
  0.01 %/K
• Status display
  Yellow LED (switching output)
• Fire protection for rail vehicles (DIN EN 45545-2) R24
  HL 1 - HL 2
• EMC
  A
• Ambient temperature (operation)
  -40 °C ... 70 °C
• Number of outputs
  1
• Frequency measuring range
  0.002 Hz ... 200 kHz
• Max. output voltage
  approx. 12.3 V
• Output name
  Switching output
• Max. switching current
  100 mA (30 V)
Conductor cross section AWG
24 ... 12 (flexible)
Screw thread
M3
Temperature coefficient, typical
0.01 %/K
Noise emission
EN 61000-6-4
Test voltage, input/output/supply
3 kV (50 Hz, 1 min.)
Designation
Shipbuilding approval
ATEX
 II 3 G Ex nA IIC T4 Gc X
Humidity
B
Minimum switching voltage
1 V
Height
109.81 mm
Frequency input
Frequency input
Configurable/programmable
Yes
Current output signal
0 mA ... 20 mA (via DIP switch)
Step response (0–99%)
< 35 ms (f > 500 Hz)
Min. switching current
100 µA
Supply voltage range
9.6 V DC ... 30 V DC (The DIN rail bus connector (ME 6,2 TBUS-2 1,5/5-ST-3,81 GN, Order No. 2869728) can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail according to EN 60715))
Conductor cross section solid
0.2 mm² ... 1.5 mm² (with ferrule)
Torque
0.5 Nm ... 0.6 Nm
Utilization restriction
EMC: class A product, see manufacturer's declaration in the download area
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Noise immunity
EN 61000-6-2 When being exposed to interference, there may be minimal deviations.
Voltage output signal
0 V ... 10 V (via DIP switch)
Load/output load current output
≤ 600 Ω (at 20 mA)
Maximum switching voltage
30 V DC
No. of channels
1
Electrical isolation
Reinforced insulation in accordance with IEC 61010-1
Rated insulation voltage
300 V (effective)
Color
gray
Load/output load voltage output
≥ 10 kΩ
Ripple
< 20 mVPP (at 600 Ω)
Power consumption
≤ 1 W (at IOUT = 20 mA, 9.6 V DC, 600 Ω load)
Connection method
Screw connection
Maximum transmission error
0.1 % (Frequency)
Overvoltage category
II
Electromagnetic compatibility
Conformance with EMC directive
Typical current consumption
32 mA (24 V DC)
Conformance
CE-compliant
Identification
UL 508 Listed
ECLASS 10.0.1
27210128
Typical deviation from the measuring range final value
2.8 %
UL, USA/Canada
UL 508 Listed
Temperature
B
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 5.0
27210100
ETIM 6.0
EC002918
DNV GL-Vibration
A
Assembly instructions
The T connector can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail according to EN 60715.
DNV GL-EMC
A
ECLASS 11.0
27210128
UNSPSC 18.0
39121007
UNSPSC 20.0
39121007
Housing material
PBT
ECLASS 5.1
27210100
Mounting position
any
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 2
Vibration
A
ECLASS 4.0
27210100
UNSPSC 7.0901
39121008
UNSPSC 19.0
39121007
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 2
DNV GL-Temperature
B
REACh SVHC
Lead 7439-92-1
ECLASS 7.0
27210120
UNSPSC 21.0
39121007
DNV GL-Enclosure
Required protection according to the Rules shall be provided upon installation on board
Enclosure
Required protection according to the Rules shall be provided upon installation on board
ECLASS 9.0
27210128
ETIM 7.0
EC002918
UNSPSC 12.01
39121008
UNSPSC 6.01
30211506
Standards/regulations
EN 61000-4-6
DNV GL-Humidity
B
ECLASS 4.1
27210100
UNSPSC 11
39121008
Degree of pollution
2
Certificate
DNV GL TAA000021E
ECLASS 6.0
27210100
ETIM 4.0
EC002653
UNSPSC 13.2
39121008

Product condition