2902042 Phoenix Contact Electrical Measuring & Monitoring Instruments
Part#:2902042
Manufacturer:Phoenix Contact
Product Lifecycle:Active
Get a quick Quote!
3-way signal conditioner with plug-in connection technology for the electrical isolation of unipolar and bipolar analog signals. Input signal: 0 ... 10 V/±10 V, output signal: 0 ... 10 V/±10 V, screw connection technology
About the manufacturer: Phoenix Contact is one of the manufacturers that offers Electrical Measuring & Monitoring Instruments that you can order at Quotebeam.com. Phoenix Contact manufactures industrial electrical and electronic technology products that offer power, protection, connectivity, and automation for systems and equipment.
Check out the 2902042 Phoenix Contact price in the box on the right side or send a quick quote.
Product Details
- Utilization restriction EMC: class A product, see manufacturer's declaration in the download area
- Ambient temperature (storage/transport) -40 °C ... 85 °C
- Height 109.81 mm
- Number of inputs 1
- Number of outputs 1
- Max. output voltage 11 V
- Transmission Behavior 1:1 to input signal
- Stripping length 10 mm
- Maximum temperature coefficient 0.01 %/K
- Maximum transmission error 0.1 % (of final value)
- Electrical isolation Reinforced insulation in accordance with IEC 61010-1
- Housing material PBT
- Depth 119.2 mm
- Permissible humidity (operation) 5 % ... 95 % (non-condensing)
- Short-circuit current < 15 mA
- Nominal supply voltage 24 V DC
- Typical current consumption 25 mA (24 V DC)
- Conductor cross section AWG 24 ... 12 (flexible)
- Temperature coefficient, typical 0.01 %/K
- Protective circuit Transient protection
- Identification UL 508 Listed
- Ambient temperature (operation) -40 °C ... 70 °C
- Noise immunity EN 61000-6-2 When being exposed to interference, there may be minimal deviations.
- Load/output load voltage output ≥ 10 kΩ
- Supply voltage range 9.6 V DC ... 30 V DC (The DIN rail bus connector (ME 6,2 TBUS-2 1,5/5-ST-3,81 GN, Order No. 2869728) can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail according to EN 60715))
- Power consumption ≤ 200 mW (at 9.6 V DC)
- Screw thread M3
- Step response (10-90%) approx. 10 ms
- Degree of pollution 2
- Noise emission EN 61000-6-4
- Fire protection for rail vehicles (DIN EN 45545-2) R24 HL 1 - HL 2
- Certificate DNV GL TAA00002UA
- Humidity B
- EMC A
- China RoHS Environmentally Friendly Use Period = 50 years
- ECLASS 6.0 27210100
- UNSPSC 7.0901 39121004
- UNSPSC 21.0 39121008
- Width 6.2 mm
- Maximum altitude ≤ 2000 m
- Configurable/programmable no
- Voltage output signal 0 V ... 10 V
- Connection method Screw connection
- Conductor cross section solid 0.2 mm² ... 1.5 mm² (with ferrule)
- Torque 0.5 Nm ... 0.6 Nm
- Limit frequency (3 dB) approx. 30 Hz
- Test voltage, input/output/supply 3 kV (50 Hz, 1 min.)
- Color gray
- Designation Shipbuilding approval
- Vibration A
- Enclosure Required protection according to the Rules shall be provided upon installation on board
- ECLASS 4.0 27210100
- ECLASS 7.0 27210120
- ETIM 6.0 EC002653
- UNSPSC 18.0 39121008
- Degree of protection IP20 (not assessed by UL)
- Input resistance of voltage input approx. 1 MΩ
- Voltage input signal 0 V ... 10 V
- Ripple < 20 mVPP (at 10 kΩ)
- Conductor cross section flexible 0.14 mm² ... 2.5 mm²
- No. of channels 1
- Overvoltage category II
- Electromagnetic compatibility Conformance with EMC directive
- Fire protection for rail vehicles (DIN EN 45545-2) R22 HL 1 - HL 2
- Assembly instructions The T connector can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail according to EN 60715.
- Standards/regulations EN 61000-4-6
- REACh SVHC Lead 7439-92-1
- ECLASS 4.1 27210100
- ETIM 7.0 EC002653
- UNSPSC 11 39121004
- UNSPSC 19.0 39121008
- UNSPSC 20.0 39121008
- Rated insulation voltage 300 V (effective)
- Mounting position any
- Fire protection for rail vehicles (DIN EN 45545-2) R23 HL 1 - HL 2
- Temperature B
- ECLASS 11.0 27210120
- ECLASS 5.1 27210100
- ETIM 4.0 EC002653
- UNSPSC 12.01 39121004
- ECLASS 10.0.1 27210120
- ECLASS 5.0 27210100
- ECLASS 9.0 27210120
- UNSPSC 6.01 30211502
- UNSPSC 13.2 39121008
Product condition
ORIGINAL PACKAGING
SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging
1-year warranty
Get a quick Quote!
Request a quote, and we will send you price and availability within minutes.
Select Qty:
Average response time: 11 minutes
By purchasing this item, you agree to the Terms & Conditions
Quotebeam is NOT an authorized distributor of Phoenix Contact
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Phoenix Contact Disclaimer:
The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Phoenix Contact Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Phoenix Contact, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Relevant products
Do you have questions?
We’re here for you ✨
We are a proud member of:
