2902039 Phoenix Contact Electrical Measuring & Monitoring Instruments
Part#:2902039
Manufacturer:Phoenix Contact
Product Lifecycle:Active
Get a quick Quote!
3-way signal conditioner with plug-in connection technology and calibrated measuring range changeover for the electrical isolation of unipolar and bipolar analog signals. Input/output configurable via DIP switch. push-in connection technology, order confi
About the manufacturer: Phoenix Contact is one of the manufacturers that offers Electrical Measuring & Monitoring Instruments that you can order at Quotebeam.com. Phoenix Contact manufactures industrial electrical and electronic technology products that offer power, protection, connectivity, and automation for systems and equipment.
Check out the 2902039 Phoenix Contact price in the box on the right side or send a quick quote.
Product Details
- Height 109.81 mm
- Degree of protection IP20 (not assessed by UL)
- Noise immunity EN 61000-6-2 When being exposed to interference, there may be minimal deviations.
- Current input signal 0 mA ... 20 mA (via DIP switch)
- Max. output current 22 mA
- Load/output load voltage output ≥ 10 kΩ
- Designation Shipbuilding approval
- EMC A
- ECLASS 11.0 27210120
- ECLASS 7.0 27210120
- UNSPSC 19.0 39121008
- Enclosure Required protection according to the Rules shall be provided upon installation on board
- Ambient temperature (storage/transport) -40 °C ... 85 °C
- Configurable/programmable Yes
- Input resistance of voltage input > 1000 kΩ
- Number of outputs 1
- Conductor cross section flexible 0.14 mm² ... 2.5 mm²
- Mounting position any
- Identification UL 508 Listed
- ECLASS 4.1 27210100
- ETIM 6.0 EC002653
- Depth 119.2 mm
- Number of inputs 1
- Voltage output signal 0 V ... 5 V (via DIP switch)
- Ripple < 20 mVPP (at 600 Ω)
- Typical current consumption 25 mA (Current output, at 24 V DC incl. load)
- Stripping length 10 mm
- Temperature B
- Humidity B
- China RoHS Environmentally Friendly Use Period = 50 years
- ECLASS 5.1 27210100
- ECLASS 9.0 27210120
- UNSPSC 13.2 39121008
- UNSPSC 21.0 39121008
- Utilization restriction EMC: class A product, see manufacturer's declaration in the download area
- Permissible humidity (operation) 5 % ... 95 % (non-condensing)
- max. input voltage 33 V
- Input resistance current input approx. 63 Ω (+0.7 V for test diode)
- Load/output load current output ≤ 600 Ω (at 20 mA)
- Standards/regulations EN 61000-4-6
- REACh SVHC Lead 7439-92-1
- ECLASS 4.0 27210100
- ECLASS 6.0 27210100
- ETIM 7.0 EC002653
- UNSPSC 20.0 39121008
- Voltage input signal 0 V ... 5 V (via DIP switch)
- Max. input current 24 mA
- Current output signal 0 mA ... 20 mA (via DIP switch)
- Nominal supply voltage 24 V DC
- Maximum temperature coefficient 0.01 %/K
- Vibration A
- UNSPSC 18.0 39121008
- ECLASS 5.0 27210100
- ETIM 4.0 EC002653
- ECLASS 10.0.1 27210120
- Ambient temperature (operation) -40 °C ... 70 °C
- Temperature coefficient, typical 0.01 %/K
- Certificate DNV GL TAA00002UA
- Connection method Push-in connection
- Conductor cross section solid 0.2 mm² ... 2.5 mm² (with ferrule)
- No. of channels 1
- Step response (10-90%) < 8.5 ms (with 30 Hz filter)
- Supply voltage range 9.6 V DC ... 30 V DC (The DIN rail bus connector (ME 6,2 TBUS-2 1,5/5-ST-3,81 GN, Order No. 2869728) can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail according to EN 60715))
- Limit frequency (3 dB) 30 Hz (via DIP switch)
- Protective circuit Transient protection
- Maximum transmission error ≤ 0.1 % (of final value)
- Width 6.2 mm
- Short-circuit current < 32 mA
- Electrical isolation Reinforced insulation in accordance with IEC 61010-1
- Power consumption ≤ 800 mW (at IOUT = 20 mA, 9.6 V DC, 600 Ω load)
- Conductor cross section AWG 24 ... 12 (flexible)
- Test voltage, input/output/supply 3 kV (50 Hz, 1 min.)
- Noise emission EN 61000-6-4
- Rated insulation voltage 300 V (effective)
- Housing material PBT
- Electromagnetic compatibility Conformance with EMC directive
- Color gray
- Degree of pollution 2
- Fire protection for rail vehicles (DIN EN 45545-2) R23 HL 1 - HL 2
- Fire protection for rail vehicles (DIN EN 45545-2) R22 HL 1 - HL 2
- Assembly instructions The T connector can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail according to EN 60715.
- Fire protection for rail vehicles (DIN EN 45545-2) R24 HL 1 - HL 2
- Overvoltage category II
Product condition
ORIGINAL PACKAGING
SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging
1-year warranty
Get a quick Quote!
Request a quote, and we will send you price and availability within minutes.
Select Qty:
Average response time: 11 minutes
By purchasing this item, you agree to the Terms & Conditions
Quotebeam is NOT an authorized distributor of Phoenix Contact
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Phoenix Contact Disclaimer:
The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Phoenix Contact Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Phoenix Contact, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Relevant products
Do you have questions?
We’re here for you ✨
We are a proud member of:
