2902040 Phoenix Contact Electrical Measuring & Monitoring Instruments

2902040 Product Details

• Depth
  119.2 mm
• Number of inputs
  1
• Max. input current
  24 mA
• Voltage output signal
  0 V ... 5 V (via DIP switch)
• No. of channels
  1
• Protective circuit
  Transient protection
• Utilization restriction
  EMC: class A product, see manufacturer's declaration in the download area
• Permissible humidity (operation)
  5 % ... 95 % (non-condensing)
• Number of outputs
  1
• Max. output current
  22 mA
• Ripple
  < 20 mVPP (at 600 Ω)
• Power consumption
  ≤ 800 mW (at IOUT = 20 mA, 9.6 V DC, 600 Ω load)
• Conductor cross section AWG
  24 ... 12 (flexible)
• Height
  109.81 mm
• Input resistance current input
  approx. 63 Ω (+0.7 V for test diode)
• Current output signal
  0 mA ... 20 mA (via DIP switch)
• Load/output load current output
  ≤ 600 Ω (at 20 mA)
• Typical current consumption
  25 mA (Current output, at 24 V DC incl. load)
• Conductor cross section flexible
  0.14 mm² ... 2.5 mm²
• Temperature coefficient, typical
  0.01 %/K
Overvoltage category
II
ECLASS 5.0
27210100
UNSPSC 6.01
30211502
UNSPSC 18.0
39121008
max. input voltage
33 V
Nominal supply voltage
24 V DC
Stripping length
10 mm
Conductor cross section solid
0.2 mm² ... 2.5 mm² (with ferrule)
Step response (10-90%)
< 8.5 ms (with 30 Hz filter)
EMC
A
ECLASS 4.0
27210100
ECLASS 7.0
27210120
ETIM 6.0
EC002653
UNSPSC 20.0
39121008
Ambient temperature (operation)
-40 °C ... 70 °C
Voltage input signal
0 V ... 5 V (via DIP switch)
Input resistance of voltage input
> 1000 kΩ
Short-circuit current
< 32 mA
Supply voltage range
9.6 V DC ... 30 V DC (The DIN rail bus connector (ME 6,2 TBUS-2 1,5/5-ST-3,81 GN, Order No. 2869728) can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail according to EN 60715))
Limit frequency (3 dB)
30 Hz (via DIP switch)
Degree of pollution
2
Housing material
PBT
Designation
Shipbuilding approval
Temperature
B
ECLASS 10.0.1
27210120
ECLASS 6.0
27210100
UNSPSC 11
39121004
UNSPSC 21.0
39121008
Maximum temperature coefficient
0.01 %/K
Electrical isolation
Reinforced insulation in accordance with IEC 61010-1
Rated insulation voltage
300 V (effective)
Noise emission
EN 61000-6-4
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 2
Certificate
DNV GL TAA00002UA
Enclosure
Required protection according to the Rules shall be provided upon installation on board
ECLASS 5.1
27210100
ETIM 4.0
EC002653
UNSPSC 7.0901
39121004
UNSPSC 13.2
39121008
UNSPSC 19.0
39121008
Electromagnetic compatibility
Conformance with EMC directive
Assembly instructions
The T connector can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail according to EN 60715.
Mounting position
any
Identification
UL 508 Listed
Standards/regulations
EN 61000-4-6
Humidity
B
ECLASS 11.0
27210120
ECLASS 4.1
27210100
ECLASS 9.0
27210120
ETIM 7.0
EC002653
UNSPSC 12.01
39121004
Noise immunity
EN 61000-6-2 When being exposed to interference, there may be minimal deviations.
Connection method
Push-in connection
Width
6.2 mm
Current input signal
0 mA ... 20 mA (via DIP switch)
Degree of protection
IP20 (not assessed by UL)
Maximum transmission error
≤ 0.1 % (of final value)
Test voltage, input/output/supply
3 kV (50 Hz, 1 min.)
Configurable/programmable
Yes
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Load/output load voltage output
≥ 10 kΩ
Vibration
A
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 2
China RoHS
Environmentally Friendly Use Period = 50 years
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 2
Color
gray
REACh SVHC
Lead 7439-92-1

Product condition