2902036 Phoenix Contact Electrical Measuring & Monitoring Instruments
Part#:2902036
Manufacturer:Phoenix Contact
Product Lifecycle:Active
Checking verified in-stock parts...
About the product: 3-way signal conditioner with plug-in connection technology and calibrated measuring range changeover for the electrical isolation of unipolar and bipolar analog signals. Input/output configurable via DIP switch. Screw connection technology, order configu
About the manufacturer: Phoenix Contact develops and manufactures industrial electrical and electronic technology products that power, protect, connect and automate systems and equipment.
Check out the 2902036 Phoenix Contact price in the box on the right side or send a quick quote.
2902036 Product Details
- Number of inputs 1
- Ambient temperature (storage/transport) -40 °C ... 85 °C
- Voltage input signal 0 V ... 5 V (via DIP switch)
- Max. output current 22 mA
- Nominal supply voltage 24 V DC
- Connection method Screw connection
- Conductor cross section flexible 0.14 mm² ... 2.5 mm²
- Temperature coefficient, typical 0.01 %/K
- Degree of pollution 2
- Current output signal 0 mA ... 20 mA (via DIP switch)
- Load/output load voltage output ≥ 10 kΩ
- Stripping length 10 mm
- Conductor cross section AWG 24 ... 12 (flexible)
- Electrical isolation Reinforced insulation in accordance with IEC 61010-1
- Electromagnetic compatibility Conformance with EMC directive
- Load/output load current output ≤ 600 Ω (at 20 mA)
- Power consumption ≤ 800 mW (at IOUT = 20 mA, 9.6 V DC, 600 Ω load)
- Torque 0.5 Nm ... 0.6 Nm
- Limit frequency (3 dB) 30 Hz (via DIP switch)
- Test voltage, input/output/supply 3 kV (50 Hz, 1 min.)
- Color gray
- Fire protection for rail vehicles (DIN EN 45545-2) R22 HL 1 - HL 2
- Standards/regulations EN 61000-4-6
- Temperature B
- ECLASS 10.0.1 27210120
- ECLASS 6.0 27210100
- Humidity B
- REACh SVHC Lead 7439-92-1
- ECLASS 5.0 27210100
- ETIM 4.0 EC002653
- UNSPSC 13.2 39121008
- Ripple < 20 mVPP (at 600 Ω)
- Screw thread M3
- No. of channels 1
- Step response (10-90%) < 8.5 ms (with 30 Hz filter)
- Rated insulation voltage 300 V (effective)
- Noise emission EN 61000-6-4
- Designation Shipbuilding approval
- Conductor cross section solid 0.2 mm² ... 1.5 mm² (with ferrule)
- Maximum transmission error ≤ 0.1 % (of final value)
- Maximum temperature coefficient 0.01 %/K
- Protective circuit Transient protection
- Housing material PBT
- Certificate DNV GL TAA00002UA
- EMC A
- ECLASS 4.1 27210100
- ECLASS 5.1 27210100
- ETIM 7.0 EC002653
- UNSPSC 20.0 39121008
- Height 109.81 mm
- Width 6.2 mm
- Permissible humidity (operation) 5 % ... 95 % (non-condensing)
- max. input voltage 33 V
- Number of outputs 1
- Typical current consumption 25 mA (Current output, at 24 V DC incl. load)
- Input resistance current input approx. 63 Ω (+0.7 V for test diode)
- Short-circuit current < 32 mA
- UNSPSC 19.0 39121008
- Noise immunity EN 61000-6-2 When being exposed to interference, there may be minimal deviations.
- Ambient temperature (operation) -40 °C ... 70 °C
- Max. input current 24 mA
- UNSPSC 21.0 39121008
- Current input signal 0 mA ... 20 mA (via DIP switch)
- Input resistance of voltage input > 1000 kΩ
- Depth 119.2 mm
- Assembly instructions The T connector can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail according to EN 60715.
- Voltage output signal 0 V ... 5 V (via DIP switch)
- Utilization restriction EMC: class A product, see manufacturer's declaration in the download area
- Fire protection for rail vehicles (DIN EN 45545-2) R24 HL 1 - HL 2
- Degree of protection IP20 (not assessed by UL)
- Configurable/programmable Yes
- Supply voltage range 9.6 V DC ... 30 V DC (The DIN rail bus connector (ME 6,2 TBUS-2 1,5/5-ST-3,81 GN, Order No. 2869728) can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail according to EN 60715))
- ETIM 6.0 EC002653
- Mounting position any
- China RoHS Environmentally Friendly Use Period = 50 years
- ECLASS 4.0 27210100
- ECLASS 11.0 27210120
- ECLASS 9.0 27210120
- Vibration A
- Identification UL 508 Listed
- UNSPSC 18.0 39121008
- Fire protection for rail vehicles (DIN EN 45545-2) R23 HL 1 - HL 2
- Overvoltage category II
- Enclosure Required protection according to the Rules shall be provided upon installation on board
- ECLASS 7.0 27210120
Product condition
New Factory Sealed
New Factory Sealed - New condition, never used surplus in original packaging with original factory seal.
Shipping and Delivery Worldwide
calculate cost and time at Checkout
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Relevant products
Do you have questions?
We’re here for you ✨