2902029 Phoenix Contact Electrical Measuring & Monitoring Instruments

2902029 Product Details

• Width
  6.2 mm
• Noise immunity
  EN 61000-6-2 When being exposed to interference, there may be minimal deviations.
• Permissible humidity (operation)
  5 % ... 95 % (non-condensing)
• Nominal supply voltage
  24 V DC
• Power consumption
  ≤ 800 mW (at 9.6 V DC)
• No. of channels
  1
• Limit frequency (3 dB)
  approx. 30 Hz
• Test voltage, input/output/supply
  3 kV (50 Hz, 1 min.)
• Fire protection for rail vehicles (DIN EN 45545-2) R22
  HL 1 - HL 2
• Standards/regulations
  EN 61000-4-6
• Depth
  119.2 mm
• Humidity
  B
• Number of inputs
  1
• ECLASS 10.0.1
  27210120
• Current output signal
  4 mA ... 20 mA
• Load/output load current output
  ≤ 600 Ω (at 20 mA)
• Connection method
  Screw connection
• Conductor cross section flexible
  0.14 mm² ... 2.5 mm²
• Temperature coefficient, typical
  0.01 %/K
• Electrical isolation
  Reinforced insulation in accordance with IEC 61010-1
Rated insulation voltage
300 V (effective)
Color
gray
Degree of protection
IP20 (not assessed by UL)
Configurable/programmable
no
Typical current consumption
25 mA (24 V DC)
Stripping length
10 mm
Conductor cross section AWG
24 ... 12 (flexible)
Maximum transmission error
0.05 % (of final value)
Overvoltage category
II
UNSPSC 19.0
39121008
Height
109.81 mm
Max. output current
22 mA
Number of outputs
1
Supply voltage range
9.6 V DC ... 30 V DC (The DIN rail bus connector (ME 6,2 TBUS-2 1,5/5-ST-3,81 GN, Order No. 2869728) can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail according to EN 60715))
Conductor cross section solid
0.2 mm² ... 1.5 mm² (with ferrule)
Maximum temperature coefficient
0.01 %/K
Step response (10-90%)
approx. 10 ms
UNSPSC 20.0
39121008
ECLASS 5.0
27210100
UNSPSC 18.0
39121008
Maximum altitude
≤ 2000 m
Voltage input signal
0 V ... 10 V
Input resistance of voltage input
approx. 1 MΩ
Ripple
< 20 mVPP (at 600 Ω)
Screw thread
M3
Torque
0.5 Nm ... 0.6 Nm
Protective circuit
Transient protection
Degree of pollution
2
Vibration
A
Temperature
B
Enclosure
Required protection according to the Rules shall be provided upon installation on board
ECLASS 11.0
27210120
ECLASS 9.0
27210120
UNSPSC 12.01
39121004
UNSPSC 21.0
39121008
Mounting position
any
Electromagnetic compatibility
Conformance with EMC directive
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Assembly instructions
The T connector can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail according to EN 60715.
Designation
Shipbuilding approval
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 2
Utilization restriction
EMC: class A product, see manufacturer's declaration in the download area
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 2
Ambient temperature (operation)
-40 °C ... 70 °C
Certificate
DNV GL TAA00002UA
ECLASS 4.1
27210100
ETIM 4.0
EC002653
Identification
UL 508 Listed
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 6.0
27210100
UNSPSC 6.01
30211502
Noise emission
EN 61000-6-4
EMC
A
ECLASS 4.0
27210100
ETIM 6.0
EC002653
ECLASS 7.0
27210120
ETIM 7.0
EC002653
Housing material
PBT
REACh SVHC
Lead 7439-92-1
ECLASS 5.1
27210100
UNSPSC 7.0901
39121004
UNSPSC 13.2
39121008
UNSPSC 11
39121004

Product condition