2902028 Phoenix Contact Electrical Measuring & Monitoring Instruments

2902028 Product Details

• Height
  109.81 mm
• Permissible humidity (operation)
  5 % ... 95 % (non-condensing)
• Current input signal
  0 mA ... 20 mA (via DIP switch)
• Number of outputs
  1
• Max. output voltage
  approx. 12.3 V
• Number of inputs
  1
• max. input voltage
  12 V
• Max. input current
  24 mA
• Load/output load current output
  ≤ 600 Ω (at 20 mA)
• Noise emission
  EN 61000-6-4
• Mounting position
  any
• Standards/regulations
  EN 61000-4-6
• DNV GL-Temperature
  B
• DNV GL-Humidity
  B
• Fire protection for rail vehicles (DIN EN 45545-2) R23
  HL 1 - HL 2
• Conformance
  CE-compliant
• DNV GL-EMC
  A
• Maximum altitude
  ≤ 2000 m
• Input resistance of voltage input
  > 120 kΩ
• Ripple
  < 20 mVPP (at 600 Ω)
Load/output load voltage output
≥ 10 kΩ
Minimum switching voltage
1 V
Color
gray
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 2
Voltage input signal
0 V ... 10 V (via DIP switch)
Max. output current
24.6 mA
Current output signal
0 mA ... 20 mA (via DIP switch)
Degree of pollution
2
Enclosure
Required protection according to the Rules shall be provided upon installation on board
ECLASS 5.1
27210100
Housing material
PBT
Typical deviation from the measuring range final value
2.8 %
UL, USA/Canada
UL 508 Listed
Temperature
B
ECLASS 9.0
27210120
UNSPSC 6.01
30211502
Input resistance current input
approx. 50 Ω (+0.7 V for test diode)
Degree of protection
IP20 (not assessed by UL)
Voltage output signal
0 V ... 10 V (via DIP switch)
Output name
Switching output
Rated insulation voltage
300 V (effective)
Electromagnetic compatibility
Conformance with EMC directive
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 2
ATEX
 II 3 G Ex nA IIC T4 Gc X
DNV GL-Enclosure
Required protection according to the Rules shall be provided upon installation on board
EMC
A
ETIM 4.0
EC002653
UNSPSC 7.0901
39121004
UNSPSC 12.01
39121004
Test voltage, input/output/supply
3 kV (50 Hz, 1 min.)
Assembly instructions
The T connector can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail according to EN 60715.
Designation
Shipbuilding approval
DNV GL-Vibration
A
ECLASS 7.0
27210120
UNSPSC 13.2
39121008
UNSPSC 20.0
39121008
Max. switching current
100 mA (at 30 V)
Conductor cross section solid
0.2 mm² ... 2.5 mm² (with ferrule)
Utilization restriction
EMC: class A product, see manufacturer's declaration in the download area
Contact type
1 N/O contact
Connection method
Push-in connection
Stripping length
10 mm
Status display
Yellow LED (switching output)
Vibration
A
ECLASS 4.0
27210100
Depth
119.2 mm
Configurable/programmable
Yes
Min. switching current
100 µA
Maximum switching voltage
30 V DC
Typical current consumption
32 mA (24 V DC)
Maximum temperature coefficient
0.01 %/K
Overvoltage category
II
ECLASS 4.1
27210100
Ambient temperature (operation)
-40 °C ... 70 °C
Supply voltage range
9.6 V DC ... 30 V DC (The DIN rail bus connector (ME 6,2 TBUS-2 1,5/5-ST-3,81 GN, Order No. 2869728) can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail according to EN 60715))
Conductor cross section AWG
24 ... 12 (flexible)
Temperature coefficient, typical
0.01 %/K
ECLASS 11.0
27210120
Nominal supply voltage
24 V DC
Power consumption
≤ 1 W (at IOUT = 20 mA, 9.6 V DC, 600 Ω load)
Conductor cross section flexible
0.14 mm² ... 2.5 mm²
No. of channels
1
Identification
UL 508 Listed
Electrical isolation
Reinforced insulation in accordance with IEC 61010-1
Width
6.2 mm
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Noise immunity
EN 61000-6-2 When being exposed to interference, there may be minimal deviations.
Maximum transmission error
0.1 % (of final value)
Humidity
B
ECLASS 10.0.1
27210120
China RoHS
Environmentally Friendly Use Period = 50 years
UNSPSC 19.0
39121008
Certificate
DNV GL TAA000021E
REACh SVHC
Lead 7439-92-1
ECLASS 5.0
27210100
ECLASS 6.0
27210100
ETIM 6.0
EC002653
UNSPSC 21.0
39121008
ETIM 7.0
EC002653
UNSPSC 18.0
39121008
UNSPSC 11
39121004

Product condition