2902027 Phoenix Contact Electrical Measuring & Monitoring Instruments
Part#:2902027
Manufacturer:Phoenix Contact
Product Lifecycle:Active
Get a quick Quote!
Universally configurable 4-way signal conditioner, with switching output and plug-in connection technology for the electrical isolation of analog signals. Configurable via DIP switch or software. Push-in connection technology, order configuration.
About the manufacturer: Phoenix Contact is one of the manufacturers that offers Electrical Measuring & Monitoring Instruments that you can order at Quotebeam.com. Phoenix Contact manufactures industrial electrical and electronic technology products that offer power, protection, connectivity, and automation for systems and equipment.
Check out the 2902027 Phoenix Contact price in the box on the right side or send a quick quote.
Product Details
- Width 6.2 mm
- Degree of protection IP20 (not assessed by UL)
- max. input voltage 12 V
- Number of outputs 1
- Max. output voltage approx. 12.3 V
- Load/output load current output ≤ 600 Ω (at 20 mA)
- Connection method Push-in connection
- Conductor cross section AWG 24 ... 12 (flexible)
- Depth 119.2 mm
- Utilization restriction EMC: class A product, see manufacturer's declaration in the download area
- Ambient temperature (storage/transport) -40 °C ... 85 °C
- Number of inputs 1
- Input resistance current input approx. 50 Ω (+0.7 V for test diode)
- Current output signal 0 mA ... 20 mA (via DIP switch)
- Min. switching current 100 µA
- Power consumption ≤ 1 W (at IOUT = 20 mA, 9.6 V DC, 600 Ω load)
- No. of channels 1
- Mounting position any
- Standards/regulations EN 61000-4-6
- Height 109.81 mm
- Maximum altitude ≤ 2000 m
- Voltage input signal 0 V ... 10 V (via DIP switch)
- Max. input current 24 mA
- Voltage output signal 0 V ... 10 V (via DIP switch)
- Max. output current 24.6 mA
- Contact type 1 N/O contact
- Max. switching current 100 mA (at 30 V)
- Typical current consumption 32 mA (24 V DC)
- Conductor cross section flexible 0.14 mm² ... 2.5 mm²
- Housing material PBT
- Load/output load voltage output ≥ 10 kΩ
- Ripple < 20 mVPP (at 600 Ω)
- Minimum switching voltage 1 V
- Nominal supply voltage 24 V DC
- Maximum transmission error 0.1 % (of final value)
- ATEX II 3 G Ex nA IIC T4 Gc X
- Ambient temperature (operation) -40 °C ... 70 °C
- Noise immunity EN 61000-6-2 When being exposed to interference, there may be minimal deviations.
- Identification UL 508 Listed
- Certificate DNV GL TAA000021E
- EMC A
- ECLASS 7.0 27210120
- UNSPSC 18.0 39121008
- Humidity B
- REACh SVHC Lead 7439-92-1
- ECLASS 4.1 27210100
- ECLASS 9.0 27210120
- UNSPSC 20.0 39121008
- Conductor cross section solid 0.2 mm² ... 2.5 mm² (with ferrule)
- Fire protection for rail vehicles (DIN EN 45545-2) R23 HL 1 - HL 2
- Designation Shipbuilding approval
- DNV GL-Humidity B
- Configurable/programmable Yes
- Fire protection for rail vehicles (DIN EN 45545-2) R24 HL 1 - HL 2
- Typical deviation from the measuring range final value 2.8 %
- UL, USA/Canada UL 508 Listed
- Conformance CE-compliant
- Test voltage, input/output/supply 3 kV (50 Hz, 1 min.)
- Fire protection for rail vehicles (DIN EN 45545-2) R22 HL 1 - HL 2
- Assembly instructions The T connector can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail according to EN 60715.
- Degree of pollution 2
- Noise emission EN 61000-6-4
- Temperature coefficient, typical 0.01 %/K
- Electromagnetic compatibility Conformance with EMC directive
- Overvoltage category II
- China RoHS Environmentally Friendly Use Period = 50 years
- ECLASS 4.0 27210100
- Current input signal 0 mA ... 20 mA (via DIP switch)
- Output name Switching output
- Supply voltage range 9.6 V DC ... 30 V DC (The DIN rail bus connector (ME 6,2 TBUS-2 1,5/5-ST-3,81 GN, Order No. 2869728) can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail according to EN 60715))
- Stripping length 10 mm
- Status display Yellow LED (switching output)
- DNV GL-Temperature B
- DNV GL-EMC A
- Vibration A
- ECLASS 6.0 27210100
- ETIM 4.0 EC002653
- Maximum switching voltage 30 V DC
- Electrical isolation Reinforced insulation in accordance with IEC 61010-1
- ECLASS 11.0 27210120
- ECLASS 5.1 27210100
- ETIM 7.0 EC002653
- Permissible humidity (operation) 5 % ... 95 % (non-condensing)
- Maximum temperature coefficient 0.01 %/K
- Rated insulation voltage 300 V (effective)
- DNV GL-Vibration A
- Temperature B
- ECLASS 5.0 27210100
- ETIM 6.0 EC002653
- UNSPSC 21.0 39121008
- Input resistance of voltage input > 120 kΩ
- Color gray
- DNV GL-Enclosure Required protection according to the Rules shall be provided upon installation on board
- Enclosure Required protection according to the Rules shall be provided upon installation on board
- ECLASS 10.0.1 27210120
- UNSPSC 13.2 39121008
- UNSPSC 19.0 39121008
Product condition
ORIGINAL PACKAGING
SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging
1-year warranty
Get a quick Quote!
Request a quote, and we will send you price and availability within minutes.
Select Qty:
Average response time: 11 minutes
By purchasing this item, you agree to the Terms & Conditions
Quotebeam is NOT an authorized distributor of Phoenix Contact
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Phoenix Contact Disclaimer:
The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Phoenix Contact Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Phoenix Contact, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Relevant products
Do you have questions?
We’re here for you ✨
We are a proud member of:
