2902026 Phoenix Contact Electrical Measuring & Monitoring Instruments
Part#:2902026
Manufacturer:Phoenix Contact
Product Lifecycle:Active
Get a quick Quote!
About the product: Universally configurable 4-way signal conditioner, with switching output and plug-in connection technology for the electrical isolation of analog signals. Configurable via DIP switch or software. Screw connection technology, standard configuration.
About the manufacturer: Phoenix Contact is one of the manufacturers that offers Electrical Measuring & Monitoring Instruments that you can order at Quotebeam.com. Phoenix Contact manufactures industrial electrical and electronic technology products that offer power, protection, connectivity, and automation for systems and equipment.
Check out the 2902026 Phoenix Contact price in the box on the right side or send a quick quote.
2902026 Product Details
- Height 109.81 mm
- Permissible humidity (operation) 5 % ... 95 % (non-condensing)
- Voltage input signal 0 V ... 10 V (via DIP switch)
- Max. input current 24 mA
- Max. output current 24.6 mA
- Contact type 1 N/O contact
- Min. switching current 100 µA
- Screw thread M3
- Maximum transmission error 0.1 % (of final value)
- Overvoltage category II
- Housing material PBT
- Utilization restriction EMC: class A product, see manufacturer's declaration in the download area
- Maximum altitude ≤ 2000 m
- Current input signal 0 mA ... 20 mA (via DIP switch)
- Input resistance current input approx. 50 Ω (+0.7 V for test diode)
- Maximum switching voltage 30 V DC
- Power consumption ≤ 1 W (at IOUT = 20 mA, 9.6 V DC, 600 Ω load)
- Conductor cross section solid 0.2 mm² ... 1.5 mm² (with ferrule)
- No. of channels 1
- Electrical isolation Reinforced insulation in accordance with IEC 61010-1
- Color gray
- Ambient temperature (storage/transport) -40 °C ... 85 °C
- Number of inputs 1
- max. input voltage 12 V
- Load/output load voltage output ≥ 10 kΩ
- Minimum switching voltage 1 V
- Conductor cross section AWG 24 ... 12 (flexible)
- Status display Yellow LED (switching output)
- Electromagnetic compatibility Conformance with EMC directive
- Fire protection for rail vehicles (DIN EN 45545-2) R22 HL 1 - HL 2
- ATEX II 3 G Ex nA IIC T4 Gc X
- DNV GL-Enclosure Required protection according to the Rules shall be provided upon installation on board
- Input resistance of voltage input > 120 kΩ
- Ripple < 20 mVPP (at 600 Ω)
- Nominal supply voltage 24 V DC
- Typical current consumption 32 mA (24 V DC)
- Width 6.2 mm
- Noise immunity EN 61000-6-2 When being exposed to interference, there may be minimal deviations.
- Torque 0.5 Nm ... 0.6 Nm
- Maximum temperature coefficient 0.01 %/K
- Degree of pollution 2
- Noise emission EN 61000-6-4
- Mounting position any
- Conformance CE-compliant
- Temperature B
- Depth 119.2 mm
- Configurable/programmable Yes
- Output name Switching output
- DNV GL-Humidity B
- Degree of protection IP20 (not assessed by UL)
- Max. switching current 100 mA (at 30 V)
- Stripping length 10 mm
- Connection method Screw connection
- Conductor cross section flexible 0.14 mm² ... 2.5 mm²
- Fire protection for rail vehicles (DIN EN 45545-2) R24 HL 1 - HL 2
- Typical deviation from the measuring range final value 2.8 %
- DNV GL-EMC A
- Vibration A
- ECLASS 4.0 27210100
- ECLASS 5.1 27210100
- ECLASS 6.0 27210100
- ETIM 6.0 EC002653
- ECLASS 11.0 27210120
- ETIM 4.0 EC002653
- UNSPSC 13.2 39121008
- UNSPSC 20.0 39121008
- Standards/regulations EN 61000-4-6
- EMC A
- DNV GL-Temperature B
- Identification UL 508 Listed
- ECLASS 7.0 27210120
- UNSPSC 18.0 39121008
- UNSPSC 21.0 39121008
- Ambient temperature (operation) -40 °C ... 70 °C
- Supply voltage range 9.6 V DC ... 30 V DC (The DIN rail bus connector (ME 6,2 TBUS-2 1,5/5-ST-3,81 GN, Order No. 2869728) can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail according to EN 60715))
- Max. output voltage approx. 12.3 V
- Temperature coefficient, typical 0.01 %/K
- UL, USA/Canada UL 508 Listed
- DNV GL-Vibration A
- Number of outputs 1
- Rated insulation voltage 300 V (effective)
- Test voltage, input/output/supply 3 kV (50 Hz, 1 min.)
- UNSPSC 6.01 30211502
- Enclosure Required protection according to the Rules shall be provided upon installation on board
- China RoHS Environmentally Friendly Use Period = 50 years
- Load/output load current output ≤ 600 Ω (at 20 mA)
- Current output signal 0 mA ... 20 mA (via DIP switch)
- Voltage output signal 0 V ... 10 V (via DIP switch)
- Fire protection for rail vehicles (DIN EN 45545-2) R23 HL 1 - HL 2
- Certificate DNV GL TAA000021E
- Designation Shipbuilding approval
- REACh SVHC Lead 7439-92-1
- Humidity B
- ECLASS 10.0.1 27210120
- Assembly instructions The T connector can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail according to EN 60715.
- ECLASS 5.0 27210100
- ETIM 7.0 EC002653
- UNSPSC 12.01 39121004
- UNSPSC 19.0 39121008
- ECLASS 4.1 27210100
- ECLASS 9.0 27210120
- UNSPSC 11 39121004
- UNSPSC 7.0901 39121004
Product condition
New Factory Sealed
New Factory Sealed - New condition, never used surplus in original packaging with original factory seal.
1-year warranty
Get a quick Quote!
Request a quote, and we will send you price and availability within minutes.
2902026
Select Qty:
Average response time: 11 minutes
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Relevant products
Do you have questions?
We’re here for you ✨